Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile.

The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit.

Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch.

Our DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up. 

 
DENALI 2.0 Features 

• HiDrive High-Intensity Cree LED's 
• TriOptic Multi-Beam Lens System 
• DataDim LED Dimming Technology 
• HotSwap Modular Wiring Harness System
• DrySeal Submersible Waterproof Illuminated Switch
• DrySeal Submersible Waterproof Light Housings 
• Impact PC Corrosion-Proof Bezels
• LiveActive Intelligent Thermal Management
• Chrome Plated Optic Holders
• Low-Profile Mount with Stainless Steel Hardware
• Handlebar Switch Mounts Included
• E Mark Lenses Included

 
Features Explained:

HiDrive High-Intensity 10 Watt LED's:
2.0 lights feature the latest development from Cree; a new Hi-Intensity LED chip that features a redesigned primary optic to maximize light output through secondary optics. The “HI” series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw.  

TriOptic Multi-Beam Lens System:
2.0 Light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. 

Data Dim LED Dimming Technology:
All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.   Plug in our DataDim Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. 

Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming.     

HotSwap Modular Wiring Harness System:
Our premium wiring harness features high-quality waterproof components and our clever HotSwap design that enables an effortless swap from the standard single-intensity relay to our dual-intensity DataDim controller (sold separately). 

DrySeal Submersible Waterproof Illuminated Switch:
Our beefy, completely sealed, waterproof switch was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. It's clever design can be either flush or bar mounted. 

DrySeal Submersible Waterproof Light Housings:
In addition to molded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed.  

Impact PC Corrosion-Proof Bezels:
Our Impact PC bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode even after taking repeated impacts from rocks and debris. 

LiveActive Intelligent Thermal Management:
DENALI 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most. 

Chrome Plated Optic Holders:
We take the extra step to chrome plate our optic holders to maximize reflectivity and refine the appearance match the original chrome reflectors of your vehicle headlights. 

Low-Profile Mount with Stainless Steel Hardware:
DENALI 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. 

Handlebar Switch Mount Included:
Our versatile switch design can be either flush, perch, or bar mounted to your vehicle. DENALI 2.0 light kits include a ?” and 1” handlebar mount to provide an integrated mounting location for the light switch right out of the box. 

E Mark Approved Lenses
DENALI 2.0 kits include E Mark approved lenses

 
D2 Kit Product Specs:

• LED's: (2x) 10 Watt Cree XPL HI
• Power Draw: 1.6 Amps
• Beam Distance (Spot): 525 Feet
• Beam Width (Spot): 75 Feet
• Raw Lumens: 2190
• Intensity: Single Intensity Harness
• DataDim Compatible: Yes 
• Operating Voltage: 12 VDC
• Pod Size:  2.2" Round x 2.4" Deep

D2 Kit Contents

• (2x) LED Light Pods
• (2x) Spot Lenses (Installed)
• (2x) E Mark Approved Elliptical Flood Lenses (Included)
• (1x) HotSwap Single Intensity Wiring Harness
• (1x) DrySeal Waterproof Illuminated Switch
• (1x) 7/8" inch Handlebar Switch Mount
• (1x) 1 inch Handlebar Switch Mount
• (2x) Hinge Mounts with M8 Stainless Steel Hardware
• (4x) Zip Ties & (1x) Adhesive Mounting Square

Tail Tidy for Yamaha Tenere 700, Tenere 700 Rally, and Tenere 700 World Raid

Radically tidy up the rear end of the Yamaha Tenere 700 with this R&G Tail Tidy.

The R&G tail tidy unit is easy to fit and will radically transform the rear end of the bike, removing the huge OEM licence plate holder - replacing it with a much sleeker looking unit.

No permanent modifciation is required, and you can refit the original indicators.

Weights

• OEM Mass: 1180g
• R&G Mass: 636g
• Weight Saving of 544g

Kit includes

• Tail Tidy Unit
• LED Number Plate Light

OEM Yamaha PIAA70 LED Fog Light Kit - Tenere 700 (2019>)

Fog lamp kit for improved vision in bad weather conditions.

• Set of two LED PIAA fog lamps running at a total of 8.5W for lower power draw
• Powerful LED lighting
• Bright blue-white beam adds complementary, wider coverage to standard beam for better visibility and improved safety, especially when riding in foggy weather conditions
• Reflector Facing Technology puts more light where the driver needs it
• 6000K White Color Temperature to replicate daylight
• SAE Compliant Fog beam pattern for superior visibility in inclement weather conditions
• 10G vibration validated to withstand the most rugged terrain
• Especially engineered by PIAA for Yamaha for a Plug and Play installation.

For installation on your Tenere 700 you will need either of the separately available mounting brackets:

• BW3-H54A5-10-00 Fog Light Bracket for Headlight Mounting
• BW3-H54A5-00-00 Fog Light Bracket for Engine Guard Mounting

The new PIAA LED Fog light offers the beam control of a halogen light with the low power consumption and durability of an LED light.

As a light source, LED's offer several advantages over their halogen counterparts including very low power consumption, compact size and durability. Unlike most LED lights currently on the market that position the LED aimed straight out forward these PIAA70 Lights aim the LEDs at the reflector. This new orientation of the light source allows for far better beam control and output than the conventional layout.

In place of a traditional halogen bulb each light uses two 3W LEDs producing a very white beam with a color temperature of 6000 Kelvin. LEDs with a computer designed multi-surface reflector gives a true high performance fog pattern in a lightweight, durable light that requires a fraction of the power used by a comparable halogen light.

PIAA’s advanced Reflector Facing Technology (RFT)
PIAA wanted to perfect LED lighting when we designed rearward-facing bulbs and new “first-in-the-industry” reflector technology. The innovative design offers significantly improved lighting and beam control compared to conventional LED and halogen lamps with forward-facing bulbs. The result is greater visibility for drivers.

Key to achieving these performance advantages is PIAA’s advanced Reflective Facing Technology (RFT). PIAA’s exclusive computer-designed, multi-surface reflector concentrates and focuses the beam pattern of the rearward-facing LED bulbs more precisely than forward-facing LED lamps. RFT is featured in PIAA’s LP Series and RF Series LED lights.

Both series of PIAA LED lamps provide brilliant illumination, but with lower power consumption than conventional LED and halogen lamps. They light the road with brilliant cobalt-blue color that is clearly visible to oncoming traffic, providing an added measure of driving safety. The lamps are compact and durable, with the cast aluminum housings and polycarbonate lenses.

This auxiliary light mount for the Yamaha Tenere 700 provides a secure mounting solution for fitment of aftermarket lighting.  

Robust aluminium bracketry is laser cut for a precise fit and finished with a durable black anodised coating. 

This versatile light mount is compatible with most popular brands of aftermarket lights. 

Existing bolt holes on the lower fork yoke (triple tree) are utilised without the need to drill, cut, weld or modify any components. 

The low profile design positions the lights close to the fairing for maximum visibility while also minimising the risk of damage during a tip over or fall. 

Note:
The images show this Light Mount fitted to our shop Tenere 700 and mounted Denali D2 lights which are 2.2" (56mm) diameter and 2.4" (61mm) deep, which gives plenty of clearance to the side fairing when the forks are on full lock either side.

Features: 

• Robust laser cut aluminium construction
• Attractive & durable anodised finish
• Bolt on installation does not require drilling, cutting or other modifications
• Utilises existing lower fork yoke mounting locations for fitment
• Compatible with most brands of auxiliary lights
• M8 sized light mounting hole
• Provides a very clean and factory looking installation
• Low profile design positions the lights close to the fairing to minimise damage in a tip over or fall
• Single piece mount makes installation simple

What's in the box:

• Auxiliary light mount for Yamaha Tenere 700
• OEM Yamaha mounting hardware .

My oh my, the factory license plate holder on the T7 is ugly, brittle, huge... and did I mention ugly?! On our first dirt ride on the new T7, we hooked a branch and snapped one of the plastic brackets, yikes.

Our tail tidy replaces all the bulky fragile plastic parts with a powder-coated 304 stainless bracket for a much better look and increased strength. 
We've set the bracket up to use the factory T7 license plate light for simplicity. The indicator light mounting holes are 10mm so you have endless options for stock or aftermarket LED indicator lights.  

Do yourself a favour, order this T7 Tail Tidy today and the lose plastic conglomeration on the back of your Tenere!

Supplied with a number plate bracket.

This is the V2 version manufactured specifically to enable the stock Euro indicators to be remounted

*LED indicator lights are not included*

OEM Yamaha Indicator Lens Complete - Tenere 700

This is a complete indicator lens including reflector - fitment is for both Left and Right, Front and Rear indicators

When you change your bike's stock incandescent signal lights to LEDs, you have to install resistors or you get "hyper flash"... that annoying super fast signal flashing. Adding resistors can be annoying so thankfully there is another option!

You can swap your bike's flasher relay out and replace it with a flasher specifically made for use with LED signals. The install is quicker and easier than adding resistors to four signal lights and its cheaper too!

This bike specific light mount allows you to mount any DENALI driving light in the optimum location on your Tenere 700.

This light mount fits the Yamaha Tenere 700 with the stock low fender but was also specifically designed to work with aftermarket high fender kits.

Keep in mind that some upper crashbars use the same mounting point, so if you are running upper crashbars that connect across the front of the bike use our crashbar mount (LAH.00.10300.B) instead to position the lights exactly where you want them.  

The kit includes powder coated steel brackets with an M8 mounting hole and all necessary mounting hardware. 

Installation Manual

OEM Yamaha Wiring harness for LED indicators - Tenere 700 (2019>)

Wire harness to simplify installation of LED blinkers.

To fit the following models:

• 2019 onwards Tenere 700
• 2020 onwards Tenere 700 Rally Edition