The ezCAN plugs directly into your CRF1100 Africa Twin and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!
The power to manage your accessories safely.
The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.
Customise your bike and make it safer to ride.
KEY FEATURES.
One device manages everything
Integrated control
Integrates additional safety features
Does not void warranty
Plugs directly into CAN-Bus (saves installation time and wiring complexity)
Unobtrusive – fits perfectly under the seat
Easy configuration of software via USB (Mac and Windows PC)
Route and plug the ezCAN into the motorcycle CAN-bus
Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)
This device works on the following Honda models:
CRF1100 Africa Twin
CRF1100 Adventure Sport
WHAT'S IN THE BOX
1 x ezCAN Device
1 x Micro USB Cable
2 x Velcro Strips
2 x Blanking Plugs
4 x Cable Ties
4 x Two-wire stub connectors (Orange)
4 x Terminal wires (Orange)
4 x Blanking seals
The HEX ezCAN Extension Harness Kit provides you with everything that you need to connect your auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.
The kit contains:
2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
1 x 0.5m 3-core extension cable (typically used for brake lights)
1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
3 x female MT-3 connector kit including pins and wire seals
5 x male MT-3 connector kit including pins and wire seals
5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
6 x 20mm adhesive lined Heat-shrink
2 x female spade connector terminals (6.3mm)
1m Sheathing
Denali D2 TriOptic™ Driving Lights
The D2 light was designed to create an impressive beam of light that is the perfect balance between night time distance and daytime conspicuity.
Features
High-Intensity Series Cree LEDs outputting 1095 lumens per pod
DrySeal™ Submersible Waterproof light can withstand the most extreme environments
Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels
LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
Low profile mounting bracket with stainless steel hardware included
Additional E-Mark Approved flood lens included
Amber lenses available (sold separately) DNL.D2.10100
The B6 LED brake light was purpose built to create the most amount of light from the most compact, low-profile housing possible. Six 1-watt Light Emitting Diodes generate improved visibility with minimal bulk. Newly updated to operate as both a brake light and running light, the B6 provides enhanced functionality on conventional motorcycles as well as those that can use the advanced features of the HEX ezCAN. Note that flash patterns and deceleration activated “auto brake light” functionality is only available when used in conjunction with the HEX ezCAN.
Features:
Six extremely bright LEDs
Low 6 watt power consumption
Running light
Brake light
License plate light
Low profile design
Easy to wire to existing brake and running light circuits