Denali & HEX ezCAN II S4 Plug & Play Kit - BMW R1300GS

This Plug & Ply Light Kit Fits The Following Models:

• BMW R1300GS - All Years

What's included:

• HEX ezCAN II Mojave
• HEX ezCAN Lighting and Accessory Installation Kit
• 2 x Denali S4 Light Pods

What's Not Included:

• Brackets for mounting your lights as there are so many different options.  But scroll down to the bottom to choose the rights ones for your set up.

The HEX ezCAN plugs directly into your bike’s CAN-bus, offering a fully configurable, plug-and-play solution to add accessories without cutting wires or risking your warranty. It gives you the power to manage your accessories safely and effortlessly.

With the ezCAN, you can easily install and configure additional lights, an air horn, and emergency brake lights, enhancing both the safety and functionality of your bike. No more complicated wiring—just seamless integration and control.

KEY FEATURES.

• One device manages everything
• Integrated control
• Integrates additional safety features
• Does not void warranty
• Plugs directly into CAN-Bus (saves installation time and wiring complexity)
• Unobtrusive – fits perfectly under the seat
• Easy configuration of software via USB (Mac and Windows PC)
• Four individually electronically fused channels
• Waterproof and dust-proof

EASY INSTALLATION. (follow this Link for install guide)

• Download and install the configuration software 
• Install the ezCAN under the seat or side panel
• Route and connect the ezCAN battery cables
• Route and plug the ezCAN into the motorcycle CAN-bus
• Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)

WHAT'S IN THE BOX

• 1 x ezCAN Device 
• 1 x Micro USB Cable
• 2 x Velcro Strips
• 2 x Blanking Plugs
• 4 x Cable Ties
• 4 x Two-wire stub connectors (Orange)
• 4 x Terminal wires (Orange)
• 4 x Blanking seals
• 1x Adventure Sleeve on the device

HEX ezCAN Lighting and Accessory Installation Kit

Plug and Play – An essential kit of cables and connectors, to make the installation of your electronic accessories as easy as possible.

This allows you to easily connect a HEX ezCAN to the following electronic accessories:

• two auxiliary front lights,
• an auxiliary horn, and
• two rear brake lights

The HEX ezCAN Lighting and Accessory Installation Kit contains:

• 2 x H1-EXT-001 HEX ezCAN Extension Cable A 1.5m – for connecting two auxiliary lights to two individual channels of the HEX ezCAN
• 1 x H1-EXT-003 HEX ezCAN Horn Extension Cable 1.5m – for connecting an auxiliary horn to one HEX ezCAN channel
• 2 x H1-EZA-003 T3 Brake light Adapter Cable – for connecting two auxiliary rear brake lights to two individual channels of the HEX ezCAN
• 1 x H1-EZS-006 HEX Y-Splitter Cable – for combining either a set of auxiliary rear brake lights, or a set of auxiliary lights, into a single HEX ezCAN channel
• 20 x H1-HWR-0002 3.5mm Cable Tie

Denali S4 TriOptic™ Driving Lights

The S4 is the first light we developed as part of our new S-Series product line.

At over 3000 lumens the S4 provides more light per dollar than just about anything else on the market.

The new S-Series lights were specifically engineered to reduce cost without sacrificing performance, quality or durability.

In fact, the S4 features the same high intensity LEDs as the D-Series lights, but utilize a single-piece optic and sealed beam construction to reduce the number of unique components.

The result is a super durable high performing light that won't break the bank.

The fixed lens features two flood optics and two spot optics to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing.

Consistent with D-Series lights, the S4 features DENALI’s innovative DataDim™ Technology that enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller (DNL.WHS.11000) that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch.

S4 Pod Features

• High-Intensity Series Cree LEDs outputting 3066 lumens per pod.
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included

S4 Pod Specs

• LED’s: (4x) 7 Watt Cree XPL HI
• Power Draw: 2.3 Amps
• Beam Distance: 375 Feet
• Beam Width: 75 Feet
• Raw Lumens: 3066
• Intensity: Single Intensity Harness
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 2.75” Square x 1.97” Deep
• Pod Weight: 0.8 lbs
• IP67 Waterproof & Submersible

S4 Pod - What’s In The Box?

• (2x) LED Light Pods 
• (2x) Hinge Mounts with M8 Stainless Steel Hardware 
• (2x) Wiring Pigtail