HEX ezCAN II / Denali D2 Light Kit - CRF1100 Africa Twin

YOUR BIKE. YOUR RULES. YOUR SAFETY.

The ezCAN plugs directly into your CRF1100 Africa Twin and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!

The power to manage your accessories safely.

The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.

Customise your bike and make it safer to ride.

KEY FEATURES.

• One device manages everything
• Integrated control
• Integrates additional safety features
• Does not void warranty
• Plugs directly into CAN-Bus (saves installation time and wiring complexity)
• Unobtrusive – fits perfectly under the seat
• Easy configuration of software via USB (Mac and Windows PC)
• Four individually electronically fused channels
• Waterproof and dust-proof

EASY INSTALLATION. (follow this Link for install guide)

• Download and install the configuration software 
• Install the ezCAN under the seat or side panel
• Route and connect the ezCAN battery cables
• Route and plug the ezCAN into the motorcycle CAN-bus
• Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)

This device works on the following Honda models:

• CRF1100 Africa Twin
• CRF1100 Adventure Sport

WHAT'S IN THE BOX

• 1 x ezCAN Device
• 1 x Micro USB Cable
• 2 x Velcro Strips
• 2 x Blanking Plugs
• 4 x Cable Ties
• 4 x Two-wire stub connectors (Orange)
• 4 x Terminal wires (Orange)
• 4 x Blanking seals

The HEX ezCAN Extension Harness Kit provides you with everything that you need to connect your auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.

The kit contains:

• 2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
• 1 x 0.5m 3-core extension cable (typically used for brake lights)
• 1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
• 3 x female MT-3 connector kit including pins and wire seals
• 5 x male MT-3 connector kit including pins and wire seals
• 5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
• 6 x 20mm adhesive lined Heat-shrink
• 2 x female spade connector terminals (6.3mm)
• 1m Sheathing

Denali D2 TriOptic™ Driving Lights

The D2 light was designed to create an impressive beam of light that is the perfect balance between night time distance and daytime conspicuity. 

Features

• High-Intensity Series Cree LEDs outputting 1095 lumens per pod
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included
• Additional E-Mark Approved flood lens included
• Amber lenses available (sold separately) DNL.D2.10100

Beam Performance (pair) 

Specs (single pod)  

• LED: (x1) 10 Watt Cree XPL HI
• Power Draw: 0.8 Amps
• Raw Lumens: 1095
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 2.2” Round x 2.4” Deep
• Pod Weight: 0.6 lbs
• IP67 Waterproof & Submersible
• E Mark Approved Flood Lens

What’s in the Box?

• (2x) LED Light Pod
• (2x) Spot Lenses (Installed) 
• (2x) E-Mark Approved Elliptical Flood Lenses (Included) 
• (2x) Hinge Mount with M8 Stainless Steel Hardware 
• (2x) Wiring Pigtail