The ezCAN plugs directly into your CRF1100 Africa Twin and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!
The power to manage your accessories safely.
The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.
Customise your bike and make it safer to ride.
One device manages everything
Integrates additional safety features
Does not void warranty
Plugs directly into CAN-Bus (saves installation time and wiring complexity)
Unobtrusive – fits perfectly under the seat
Easy configuration of software via USB (Mac and Windows PC)
Route and plug the ezCAN into the motorcycle CAN-bus
Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)
This device works on the following Honda models:
CRF1100 Africa Twin
CRF1100 Adventure Sport
WHAT'S IN THE BOX
1 x ezCAN Device
1 x Micro USB Cable
2 x Velcro Strips
2 x Blanking Plugs
4 x Cable Ties
4 x Two-wire stub connectors (Orange)
4 x Terminal wires (Orange)
4 x Blanking seals
The HEX ezCAN Extension Harness Kit provides you with everything that you need to connect your auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.
The kit contains:
2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
1 x 0.5m 3-core extension cable (typically used for brake lights)
1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
3 x female MT-3 connector kit including pins and wire seals
5 x male MT-3 connector kit including pins and wire seals
5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
6 x 20mm adhesive lined Heat-shrink
2 x female spade connector terminals (6.3mm)
Denali D4 TriOptic™ Driving Lights
Simply put; the DENALI D4 is a beast. It is DENALI’s most powerful light packing the punch of 4380 lumens in an aggressively styled housing.
The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing.
The included spot lens throws a massive beam of light and carries an official E-Mark certification.
High-Intensity Series Cree LEDs outputting 4380 lumens per pod
DrySeal™ Submersible Waterproof light can withstand the most extreme environments
LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
Low profile mounting bracket with stainless steel hardware included
Additional E-Mark Approved flood lens included
Amber lenses available (sold separately) DNL.D4.10100
Beam Performance (pair)
Specs (single pod)
LED’s: (4x) 10 Watt Cree XPL HI
Power Draw: 3.3 Amps
Raw Lumens: 4380
DataDim™ Compatible: Yes
Operating Voltage: 12 VDC
Pod Size: 3.9” Square x 2.6” Deep
Pod Weight: 1.55 lbs
IP67 Waterproof & Submersible
E Mark Approved Spot Lens
What’s in the Box?
(2x) D4 LED Light Pods
(2x) True-Hybrid™ Lenses (Installed)
(2x) E-Mark Approved Spot Lenses (included)
(2x) Hinge Mounts with M8 Stainless Steel Hardware
(2x) Wiring Pigtail
Denali B6 Auxiliary LED License Plate Brake light
The B6 LED brake light was purpose built to create the most amount of light from the most compact, low-profile housing possible. Six 1-watt Light Emitting Diodes generate improved visibility with minimal bulk. Newly updated to operate as both a brake light and running light, the B6 provides enhanced functionality on conventional motorcycles as well as those that can use the advanced features of the HEX ezCAN. Note that flash patterns and deceleration activated “auto brake light” functionality is only available when used in conjunction with the HEX ezCAN.
Six extremely bright LEDs
Low 6 watt power consumption
License plate light
Low profile design
Easy to wire to existing brake and running light circuits