Choosing luggage for your bike is a bit of a minefield, particularly if you want to build up a full set of luggage. To make this a bit easier, we've put together some top quality luggage systems using a mix of premium brands - in this case the world renowned brands of Touratech and Kriega.

This top class kit is ready to see you through all adventures now and for many years to come.

This luggage fits the following models:

• BMW R1300GS - All years

Included Within This Luggage Set

• Set of Touratech Pannier Frames - Silver R1300GS
• 2 x Kriega OS-Platforms
• 2 x Kriega OS-22 Soft Panniers

Touratech Stainless Steel Pannier Frames

The Touratech pannier rack was developed specifically for the requirements of the R1300GS in terms of design and function.  The pannier racks are the excellent basis for adding Kriega OS Soft Panniers.

The pannier frames are 3-dimensionally shaped assemblies. This type of construction ensures significantly greater stability while also being lighter!  The Touratech pannier rack gets its particularly high stability from the combination of a design that has been tried and tested 10,000 times, the highest quality materials, as well as the patented connecting elements and 3D tabs.

At the same time, the case carrier takes up the design of the rear frame of the BMW R 1300 GS. For the first time, the 18x2 mm stainless steel tubes are reinforced with 3D elements made of 2 and 3 mm thick stainless steel sheets! Not just a visual gain!

The relatively low-lying rear muffler of the BMW R 1300 GS enables a symmetrical structure and thus the use of the same case size on both sides of your bike.

Installation is carried out at easily accessible existing fastening points. With just a few screws, the very robust construction can be mounted or dismantled.

Details:

• Made of electropolished stainless steel
• Suitable for tough off-road use
• No restriction on the pillion passenger
• Fits elegantly into the design of the BMW
• Easy assembly / disassembly
• Total width approx. 50 cm only

Kriega OS-PLATFORMS - Set of 2

Our multi-purpose mounting platform provides a virtually indestructible foundation for your adventures. Fit OS-SOFT PANNIERS, or a combination of our modular OS-ADV PACKS and fuel/ water containers, swapping between them depending on your route and destination. 

This evolution of our ground-breaking design sees us manufacture with moulded DuPont™ Zytel®, a material that allows us to maintain the class-leading durability while drastically reducing weight. 

The platform design has the benefit of allowing the secure fitting of soft panniers, a much safer alternative to traditional hard luggage. Supplied with a ten-year warranty, the OS-PLATFORM is also universal fit, so you retain the rugged luggage even when you swap bikes or pannier frames.

Included with the pair of Platforms is a fitting kit to mount on 16mm - 19mm (3/4") tube pannier racks with standard flat hoop shape and SW-Motech non-tubular racks. 

PLATFORM DIMENSIONS

• 390W x 300H x 10D mm
• 15.3W x 11.8H x 0.3D inch
• Weight per set of2 - 1600g  / 3.52 lbs. including fittings

Kriega OS-Panniers

Serious 'adventure' motorcycle travel demands serious adventure luggage and the New KRIEGA OVERLANDER-SYSTEM (OS) sets a new standard.
 
The OS soft pannier is at the core of the range and shares many of the features of traditional ADV hard luggage with the added benefits of durability and safety for riding in demanding environments where there will be the inevitable scrape with the terrain.  The structured box shape allows for effortless packing and load control. The 100% waterproof roll-top closure and removable white liner guarantee pack contents remain protected from the elements.
 
Mounting and dismounting to the OS panniers to the bike takes less than a minute with two quick release straps and buckles. The same straps compress the pack firmly in position. No extra tie-down straps are required.  Constructed from the highest quality materials including ultra-abrasion resistant Hypalon™ + 1000D Cordura®, with Kevlar® webbing and aircraft grade alloy buckles.
 
 
FEATURES

• The OS pannier is the base for various add-on options with 16 “hook-on” points. Choose either 6 or 12 litre OS-PACKS to mount on the top and/or front or back, to build up a bespoke luggage system to suit your type or trip length.
• A reinforced handle assists carrying heavy loads off the bike. Plus an optional OS-SHOULDER STRAP can be hooked on to convert to a shoulder bag.
• A security cable block provides a solid mounting point to cable-lock the pack to the bike frame to stop the opportunist thief.
• Hi-Vis details front and rear add an extra safety element for low light riding.
• TECH-SPECS
• 100% waterproof liner
• Roll-top closure
• HYPALON™+ 1000D Cordura®
• Reinforced carry handle
• Aircraft grade alloy buckles
• KEVLAR® webbing
• Security cable block
• Hi-Vis details
• 16 hook-on points
• Shoulder strap loops

OS-PANNIER DIMENSIONS

• OS-22 Pannier - 400(h) x 420(w) x 150(d) mm
• OS-32 Pannier - 400(h) x 420(w) x 190(d) mm
• OS-38 Pannier - 400(h) x 420(w) x 230(d) mm