HEX ezCAN II YARI for the Yamaha Tenere 700 (all models and versions).
YOUR BIKE. YOUR RULES. YOUR SAFETY.
The ezCAN plugs directly into your Tenere and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!
The power to manage your accessories safely.
The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.
Customise your bike and make it safer to ride.
KEY FEATURES.
One device manages everything
Integrated control
Integrates additional safety features
Does not void warranty
Plugs directly into CAN-Bus (saves installation time and wiring complexity)
Unobtrusive – fits perfectly under the seat
Easy configuration of software via USB (Mac and Windows PC)
Route and plug the ezCAN into the motorcycle CAN-bus
Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)
This HEX ezCAN will work on the following bike models:
Ténéré 700 (2019-2022)
Ténéré 700 Rally Edition (2020-2022)
Ténéré 700 World Raid (2022+)
Ténéré 700 (2023+)
Ténéré 700 Rally Edition (2023+)
Ténéré 700 Extreme Edition (2023+)
Ténéré 700 Explore Edition (2023+)
This product is supplied with two diagnostic port adapter cables allowing support for both Euro4 & Euro5 models of bike.
NOTE:If you are planning on installing auxiliary lights and / or a Denali SoundBomb Horn, please add the EXTENSION HARNESS KIT.
WHAT'S IN THE BOX
1 x ezCAN Device
1 x Micro USB Cable
2 x Velcro Strips
2 x Blanking Plugs
4 x Cable Ties
4 x Two-wire stub connectors (Orange)
4 x Terminal wires (Orange)
4 x Blanking seals
1 x Green Horn Harness
1 x Blue 4-way High beam Harness (for bikes with colour TFT display)
1 x Blue 6-way High beam Harness (for bikes with monochrome display)
1 x Euro5 diagnostic adapter (2022+ Euro5 models)
1 x Euro4 diagnostic adapter (2019-2022 Euro4 models)
The HEX ezCAN Extension Harness Kit provides you with everything that you need to connect your auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.
The kit contains:
2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
1 x 0.5m 3-core extension cable (typically used for brake lights)
1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
3 x female MT-3 connector kit including pins and wire seals
5 x male MT-3 connector kit including pins and wire seals
5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
6 x 20mm adhesive lined Heat-shrink
2 x female spade connector terminals (6.3mm)
1m Sheathing
Denali D4 TriOptic™ Driving Lights
Simply put; the DENALI D4 is a beast. It is DENALI’s most powerful light packing the punch of 4380 lumens in an aggressively styled housing.
The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing.
The included spot lens throws a massive beam of light and carries an official E-Mark certification.
Features
High-Intensity Series Cree LEDs outputting 4380 lumens per pod
DrySeal™ Submersible Waterproof light can withstand the most extreme environments
LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
Low profile mounting bracket with stainless steel hardware included
Additional E-Mark Approved flood lens included
Amber lenses available (sold separately) DNL.D4.10100
Beam Performance (pair)
Specs (single pod)
LED’s: (4x) 10 Watt Cree XPL HI
Power Draw: 3.3 Amps
Raw Lumens: 4380
DataDim™ Compatible: Yes
Operating Voltage: 12 VDC
Pod Size: 3.9” Square x 2.6” Deep
Pod Weight: 1.55 lbs
IP67 Waterproof & Submersible
E Mark Approved Spot Lens
What’s in the Box?
(2x) D4 LED Light Pods
(2x) True-Hybrid™ Lenses (Installed)
(2x) E-Mark Approved Spot Lenses (included)
(2x) Hinge Mounts with M8 Stainless Steel Hardware
