Simply put; the DENALI DR4 2.0 LED TriOptic™ LED light kit with DataDim technology is a beast.
It is our most powerful light packing the punch of 8760 lumens in a pair of aggressively styled housings. The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. The included pair of spot lenses throws a massive beam of light 800 feet and carries an offcial E-Mark certification.
Like the other lights in the DENALI 2.0 lineup, the DR4 kit uses a new HotSwap™ modular wiring harness that, by default, causes these lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)
Also new with the DENALI 2.0 generation of lighting is the industry-leading TriOptic™ lens system. Each lamp comes with both spot and True-Hybrid™ lenses in the box, nothing else to buy. The spot lens produces the greatest beam distance, while the True-Hybrid™ lens produces a broader spread of light closer to the motorcycle, filling the road edge and shoulders. This lens splits the difference between a normal spot and a conventional flood pattern, giving you the best of both worlds. And for even more flexibility, you can install just one of the True-Hybrid™ lenses to retain a little more distance coverage. The True-Hybrid™ lenses are E-Marked to be road legal in countries where this is a requirement. No matter which lens you choose, the DR4 2.0 light kit lets you see the road (or lack thereof) and be seen by other traffic around you. Enjoy the darkness with DENALI!
Specifications:
- LED's: (8x) 10 Watt Cree XPL HI
- Power Draw: 6.6 Amps
- Beam Distance (Spot): 800 Feet
- Beam Width (Spot): 110 Feet
- Raw Lumens: 8760
- Intensity: Single Intensity Harness
- DataDim Compatible: Yes
- Operating Voltage: 12 VDC
- Pod Size: 3.9" Square x 2.6" Deep
DR4 Kit Contents:
- (2) LED Light Pods
- (2) Spot lenses (pre-installed)
- (2) E-Mark approved True-Hybrid™ lenses
- (1) HotSwap™ single intensity wiring harness with the capability of a plug-and-play hot swap to dual intensity without changing the harness itself
- (1) DrySeal™ waterproof illuminated switch
- (1) 7/8in handlebar switch mount
- (1) 1in handlebar switch mount
- (2) hinge mounts with M8 stainless steel hardware
- (4) Zip ties & (1) adhesive mounting square
![](http://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fruggedroads.co.uk%2FDENALI-20-DR4-TriOptic-LED-Light-Kit-with-DataDim-Technology&t=%20DENALI 2.0 DR4 TriOptic LED Light Kit with DataDim Technology%0A<p style="text-align: center;"><img alt="Denali_Logo" src="http://ruggedroads.co.uk/WebRoot/Store15/Shops/00cbb604-5d1c-407e-8207-580e14387ec5/MediaGallery/Denali_Logo.JPG" /></p>
<div style="text-align: center;"><span style="font-size: 12px;">Simply put; the </span><span style="font-family: Tahoma, Verdana, Helvetica; font-size: 12px; text-align: center;">DENALI DR4 2.0 LED TriOptic™ LED light kit with DataDim technology</span><span style="font-size: 12px;"> is a beast. </span></div>
<div style="text-align: center;"><span style="font-size: 12px;">It is our most powerful light packing the punch of 8760 lumens in a pair of aggressively styled housings. The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. The included pair of spot lenses throws a massive beam of light 800 feet and carries an offcial E-Mark certification.</span></div>
<div style="text-align: center;"> </div>
<div style="text-align: center;"><span style="font-size: 12px;">Like the other lights in the DENALI 2.0 lineup, the DR4 kit uses a new HotSwap™ modular wiring harness that, by default, causes these lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)</span></div>
<div style="text-align: center;"> </div>
<div style="text-align: center;"><span style="font-size: 12px;">Also new with the DENALI 2.0 generation of lighting is the industry-leading TriOptic™ lens system. Each lamp comes with both spot and True-Hybrid™ lenses in the box, nothing else to buy. The spot lens produces the greatest beam distance, while the True-Hybrid™ lens produces a broader spread of light closer to the motorcycle, filling the road edge and shoulders. This lens splits the difference between a normal spot and a conventional flood pattern, giving you the best of both worlds. And for even more flexibility, you can install just one of the True-Hybrid™ lenses to retain a little more distance coverage. The True-Hybrid™ lenses are E-Marked to be road legal in countries where this is a requirement. No matter which lens you choose, the DR4 2.0 light kit lets you see the road (or lack thereof) and be seen by other traffic around you. Enjoy the darkness with DENALI!</span></div>
<div> </div>
<div><u><strong><span style="font-size: 12px;">Specifications:</span></strong></u></div>
<div>
<ul>
<li><span style="font-size: 12px;">LED's: (8x) 10 Watt Cree XPL HI</span></li>
<li><span style="font-size: 12px;">Power Draw: 6.6 Amps</span></li>
<li><span style="font-size: 12px;">Beam Distance (Spot): 800 Feet</span></li>
<li><span style="font-size: 12px;">Beam Width (Spot): 110 Feet</span></li>
<li><span style="font-size: 12px;">Raw Lumens: 8760</span></li>
<li><span style="font-size: 12px;">Intensity: Single Intensity Harness</span></li>
<li><span style="font-size: 12px;">DataDim Compatible: Yes </span></li>
<li><span style="font-size: 12px;">Operating Voltage: 12 VDC</span></li>
<li><span style="font-size: 12px;">Pod Size: 3.9" Square x 2.6" Deep</span></li>
</ul>
</div>
<div> </div>
<div><u style="font-family: inherit;"><strong><span style="font-size: 12px;">DR4 Kit Contents:</span></strong></u></div>
<ul>
<li><span style="font-size: 12px;">(2) LED Light Pods</span></li>
<li><span style="font-size: 12px;">(2) Spot lenses (pre-installed)</span></li>
<li><span style="font-size: 12px;">(2) E-Mark approved True-Hybrid™ lenses </span></li>
<li><span style="font-size: 12px;">(1) HotSwap™ single intensity wiring harness with the capability of a plug-and-play hot swap to dual intensity without changing the harness itself</span></li>
<li><span style="font-size: 12px;">(1) DrySeal™ waterproof illuminated switch</span></li>
<li><span style="font-size: 12px;">(1) 7/8in handlebar switch mount</span></li>
<li><span style="font-size: 12px;">(1) 1in handlebar switch mount</span></li>
<li><span style="font-size: 12px;">(2) hinge mounts with M8 stainless steel hardware</span></li>
<li><span style="font-size: 12px;">(4) Zip ties & (1) adhesive mounting square</span></li>
</ul>%0A%0A#FinalPrice[0]&src=sp){kind=link}
![](https://twitter.com/intent/tweet?original_referer=https%3A%2F%2Fruggedroads.co.uk%2FDENALI-20-DR4-TriOptic-LED-Light-Kit-with-DataDim-Technology&source=tweetbutton&text=DENALI 2.0 DR4 TriOptic LED Light Kit with DataDim Technology%0A%0A<p style="text-align: center;"><img alt="Denali_Logo" src="http://ruggedroads.co.uk/WebRoot/Store15/Shops/00cbb604-5d1c-407e-8207-580e14387ec5/MediaGallery/Denali_Logo.JPG" /></p>
<div style="text-align: center;"><span style="font-size: 12px;">Simply put; the </span><span style="font-family: Tahoma, Verdana, Helvetica; font-size: 12px; text-align: center;">DENALI DR4 2.0 LED TriOptic™ LED light kit with DataDim technology</span><span style="font-size: 12px;"> is a beast. </span></div>
<div style="text-align: center;"><span style="font-size: 12px;">It is our most powerful light packing the punch of 8760 lumens in a pair of aggressively styled housings. The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. The included pair of spot lenses throws a massive beam of light 800 feet and carries an offcial E-Mark certification.</span></div>
<div style="text-align: center;"> </div>
<div style="text-align: center;"><span style="font-size: 12px;">Like the other lights in the DENALI 2.0 lineup, the DR4 kit uses a new HotSwap™ modular wiring harness that, by default, causes these lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)</span></div>
<div style="text-align: center;"> </div>
<div style="text-align: center;"><span style="font-size: 12px;">Also new with the DENALI 2.0 generation of lighting is the industry-leading TriOptic™ lens system. Each lamp comes with both spot and True-Hybrid™ lenses in the box, nothing else to buy. The spot lens produces the greatest beam distance, while the True-Hybrid™ lens produces a broader spread of light closer to the motorcycle, filling the road edge and shoulders. This lens splits the difference between a normal spot and a conventional flood pattern, giving you the best of both worlds. And for even more flexibility, you can install just one of the True-Hybrid™ lenses to retain a little more distance coverage. The True-Hybrid™ lenses are E-Marked to be road legal in countries where this is a requirement. No matter which lens you choose, the DR4 2.0 light kit lets you see the road (or lack thereof) and be seen by other traffic around you. Enjoy the darkness with DENALI!</span></div>
<div> </div>
<div><u><strong><span style="font-size: 12px;">Specifications:</span></strong></u></div>
<div>
<ul>
<li><span style="font-size: 12px;">LED's: (8x) 10 Watt Cree XPL HI</span></li>
<li><span style="font-size: 12px;">Power Draw: 6.6 Amps</span></li>
<li><span style="font-size: 12px;">Beam Distance (Spot): 800 Feet</span></li>
<li><span style="font-size: 12px;">Beam Width (Spot): 110 Feet</span></li>
<li><span style="font-size: 12px;">Raw Lumens: 8760</span></li>
<li><span style="font-size: 12px;">Intensity: Single Intensity Harness</span></li>
<li><span style="font-size: 12px;">DataDim Compatible: Yes </span></li>
<li><span style="font-size: 12px;">Operating Voltage: 12 VDC</span></li>
<li><span style="font-size: 12px;">Pod Size: 3.9" Square x 2.6" Deep</span></li>
</ul>
</div>
<div> </div>
<div><u style="font-family: inherit;"><strong><span style="font-size: 12px;">DR4 Kit Contents:</span></strong></u></div>
<ul>
<li><span style="font-size: 12px;">(2) LED Light Pods</span></li>
<li><span style="font-size: 12px;">(2) Spot lenses (pre-installed)</span></li>
<li><span style="font-size: 12px;">(2) E-Mark approved True-Hybrid™ lenses </span></li>
<li><span style="font-size: 12px;">(1) HotSwap™ single intensity wiring harness with the capability of a plug-and-play hot swap to dual intensity without changing the harness itself</span></li>
<li><span style="font-size: 12px;">(1) DrySeal™ waterproof illuminated switch</span></li>
<li><span style="font-size: 12px;">(1) 7/8in handlebar switch mount</span></li>
<li><span style="font-size: 12px;">(1) 1in handlebar switch mount</span></li>
<li><span style="font-size: 12px;">(2) hinge mounts with M8 stainless steel hardware</span></li>
<li><span style="font-size: 12px;">(4) Zip ties & (1) adhesive mounting square</span></li>
</ul>%0A%0A#FinalPrice[0]&url=https%3A%2F%2Fruggedroads.co.uk%2FDENALI-20-DR4-TriOptic-LED-Light-Kit-with-DataDim-Technology){kind=link}
![](mailto:?subject=My recommendation:%20DENALI 2.0 DR4 TriOptic LED Light Kit with DataDim Technology&body=<p style="text-align: center;"><img alt="Denali_Logo" src="http://ruggedroads.co.uk/WebRoot/Store15/Shops/00cbb604-5d1c-407e-8207-580e14387ec5/MediaGallery/Denali_Logo.JPG" /></p>
<div style="text-align: center;"><span style="font-size: 12px;">Simply put; the </span><span style="font-family: Tahoma, Verdana, Helvetica; font-size: 12px; text-align: center;">DENALI DR4 2.0 LED TriOptic™ LED light kit with DataDim technology</span><span style="font-size: 12px;"> is a beast. </span></div>
<div style="text-align: center;"><span style="font-size: 12px;">It is our most powerful light packing the punch of 8760 lumens in a pair of aggressively styled housings. The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. The included pair of spot lenses throws a massive beam of light 800 feet and carries an offcial E-Mark certification.</span></div>
<div style="text-align: center;"> </div>
<div style="text-align: center;"><span style="font-size: 12px;">Like the other lights in the DENALI 2.0 lineup, the DR4 kit uses a new HotSwap™ modular wiring harness that, by default, causes these lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ controller. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit. (You can also purchase a three-position switch to manually control light intensity independent of the bike’s high beam.)</span></div>
<div style="text-align: center;"> </div>
<div style="text-align: center;"><span style="font-size: 12px;">Also new with the DENALI 2.0 generation of lighting is the industry-leading TriOptic™ lens system. Each lamp comes with both spot and True-Hybrid™ lenses in the box, nothing else to buy. The spot lens produces the greatest beam distance, while the True-Hybrid™ lens produces a broader spread of light closer to the motorcycle, filling the road edge and shoulders. This lens splits the difference between a normal spot and a conventional flood pattern, giving you the best of both worlds. And for even more flexibility, you can install just one of the True-Hybrid™ lenses to retain a little more distance coverage. The True-Hybrid™ lenses are E-Marked to be road legal in countries where this is a requirement. No matter which lens you choose, the DR4 2.0 light kit lets you see the road (or lack thereof) and be seen by other traffic around you. Enjoy the darkness with DENALI!</span></div>
<div> </div>
<div><u><strong><span style="font-size: 12px;">Specifications:</span></strong></u></div>
<div>
<ul>
<li><span style="font-size: 12px;">LED's: (8x) 10 Watt Cree XPL HI</span></li>
<li><span style="font-size: 12px;">Power Draw: 6.6 Amps</span></li>
<li><span style="font-size: 12px;">Beam Distance (Spot): 800 Feet</span></li>
<li><span style="font-size: 12px;">Beam Width (Spot): 110 Feet</span></li>
<li><span style="font-size: 12px;">Raw Lumens: 8760</span></li>
<li><span style="font-size: 12px;">Intensity: Single Intensity Harness</span></li>
<li><span style="font-size: 12px;">DataDim Compatible: Yes </span></li>
<li><span style="font-size: 12px;">Operating Voltage: 12 VDC</span></li>
<li><span style="font-size: 12px;">Pod Size: 3.9" Square x 2.6" Deep</span></li>
</ul>
</div>
<div> </div>
<div><u style="font-family: inherit;"><strong><span style="font-size: 12px;">DR4 Kit Contents:</span></strong></u></div>
<ul>
<li><span style="font-size: 12px;">(2) LED Light Pods</span></li>
<li><span style="font-size: 12px;">(2) Spot lenses (pre-installed)</span></li>
<li><span style="font-size: 12px;">(2) E-Mark approved True-Hybrid™ lenses </span></li>
<li><span style="font-size: 12px;">(1) HotSwap™ single intensity wiring harness with the capability of a plug-and-play hot swap to dual intensity without changing the harness itself</span></li>
<li><span style="font-size: 12px;">(1) DrySeal™ waterproof illuminated switch</span></li>
<li><span style="font-size: 12px;">(1) 7/8in handlebar switch mount</span></li>
<li><span style="font-size: 12px;">(1) 1in handlebar switch mount</span></li>
<li><span style="font-size: 12px;">(2) hinge mounts with M8 stainless steel hardware</span></li>
<li><span style="font-size: 12px;">(4) Zip ties & (1) adhesive mounting square</span></li>
</ul>%0A%0A%20#FinalPrice[0]%0A%0A%3Ca%20href%3D%22https%3A%2F%2Fruggedroads.co.uk%2FDENALI-20-DR4-TriOptic-LED-Light-Kit-with-DataDim-Technology%22%3EDisplay%3C%2Fa%3E){kind=link}