Description

There are so many things to love about the Yamaha 700 Tenere! Unfortunately, the exhaust is a bit of a Dr Jekyll and Mr Hyde situation.

It looks and sounds amazing, but it has a dark side. It’s located low and wide and is mounted on a very long exhaust hanger that’s welded to the subframe. When the bike is dropped on the right side, the mount can be bent which allows the muffler to be pushed into the side of the swingarm. If it is not bent back before being ridden, the aluminium swing arm gets chewed up by the steel muffler (see photo below). Adding insult to injury, if you bend the hanger enough times, it can crack at the subframe.

Having experienced the bent hanger and torn up swing arm personally, Camel came up with a new exhaust system the places the muffler up much higher and closer to the bikes centreline… out of harms way. To achieve this, they had to make a new link pipe and a new bracket to shorten the very long stock muffler hanger which greatly reduces leverage it sees making it much less likely to be bent in a drop.

The kit includes:

• TIG welded, 304 stainless, “Lobster-Back”, robotically welded link pipe with wire heel guards for both the rider and pillion.
• Our anodized CNC machined billet 6061 aluminum clamp. This mounting bracket is simple to install and reduces the hanger length (and leverage by about 50%). *Patent Pending*
• A Scorpion Brushed Stainless Steel Serket ‘Red Power’ silencer with removeable baffle. This silencer is lightweight, durable and sounds great!
• Indicator Heatshields.
• All fasteners, springs, exhaust clamp, graphite seal and Camel ADV decals.

Features:

• Compatible with most pannier racks
• Easy to install with basic hand tools

Pannier compatibility:

• Yamaha OEM
• Touratech Zega
• SW Motech PRO
• Ride ADV Solo racks
• Rally Raid soft bag plates
• ADV Spec soft bag plates (require 17mm spacers and longer bolts)
• 2nd Gen Outback Motortek Symmetrical and Asymmetrical racks
• Tusk
• Mosko Moto Reckless series
• Giant Loop

*If a Tail Tidy is being used, we strongly recommend the OEM incandescent signal lights be replaced with smaller LED units. The signal light heat shield supplied in the exhaust kit will not fully cover the large OEM signal so they can be melted with exhaust heat. The OEM signals are OK if the OEM tail section (not a Tail Tidy) is retained.

*This kit’s hanger bracket is officially Patent Pending*

The install videos below show the original silencer offered by CamelADV, but the process of fitting is identical using the current generic silencer.

INTRO VIDEO

INSTALLATION VIDEO