Made of 4mm anodised aluminium, our skid plate gives protection to the oil filter, catalytic converter and header pipes. It closely conforms to the underside of your bike for protection that doesn’t sacrifice ground clearance.

This design is fully precision welded, creating a strong unit that deflects dangerous debris away from your bike. It attaches using the BMW OEM fasteners that are completely protected, eliminating the possibility of snags.

Stainless steel 316L brackets are included for mounting, which maintain the original BMW OEM rubber mounts for ensured engine safety. The brackets extend the life of the rubber mounts by providing an extra cushion on bumpy rides, whilst also keeping the skid plate from twisting and shearing the mounts.

No matter where you ride, you can keep going without worry by installing the Rugged Roads Skid Plate.

Available in anodised Silver and anodised Black.

• Compatible with OEM BMW centre stand
• Compatible with OEM BMW crash bars
• Compatible with Givi crash bars
• Compatible with Touratech crash bars
• Compatible with SW Motech crash bars
• Compatible with Adventure-Spec crash bars
• Compatible with AltRider crash bars
• Extremely lightweight anodised aluminium 5251-H22 construction, no heavy steel
• All corners radiused – no sharp bits to snag on trail debris
• 6 mounting points to distribute impact loading
• Easy to install; all mounting brackets have stainless steel threaded hex inserts installed – no loose nuts!
• Mounting points for optional Skid Plate Tool Box

This Skid Plate fits the following models:
• BMW F650GS (Twin)
• BMW F700GS
• BMW F800GS (2008 – 2012)
• BMW F800GS (2013 >)
• BMW F800GS Adventure (2014 >)

Colour - Matt Black

The Rugged Roads Left Hand Heel Protector fits the following models:
• BMW F650GS (Twin)
• BMW F700GS
• BMW F800GS (2008 – 2012)
• BMW F800GS (2013 >)
• BMW F800GS Adventure (2014 >)

Colour - Silver

The Rugged Roads Left Hand Heel Protector fits the following models:
• BMW F650GS (Twin)
• BMW F700GS
• BMW F800GS (2008 – 2012)
• BMW F800GS (2013 >)
• BMW F800GS Adventure (2014 >)

The Rugged Roads guard extends upwards, giving additional protection to the brake lines, and further downwards, protecting the switch, and gives much more coverage to protect the frame.

Manufactured from anodised aluminium, it is much stronger than the stock plastic guard and takes just moments to fit.

Colour - Silver

The Rugged Roads Rear Brake Master Cylinder Guard fits the following models:
• BMW F650GS (Twin)
• BMW F700GS
• BMW F800GS (2008 – 2012)
• BMW F800GS (2013 >)
• BMW F800GS Adventure (2014 >)

The Rugged Roads guard extends upwards, giving additional protection to the brake lines, and further downwards, protecting the switch, and gives much more coverage to protect the frame.

Manufactured from anodised aluminium, it is much stronger than the stock plastic guard and takes just moments to fit.

Colour - Silver

The Rugged Roads Rear Brake Master Cylinder Guard fits the following models:
• BMW F650GS (Twin)
• BMW F700GS
• BMW F800GS (2008 – 2012)
• BMW F800GS (2013 >)
• BMW F800GS Adventure (2014 >)

Manufactured in Stainless Steel 316L

The Rugged Roads Rear ABS Sensor Guard fits the following models:
• BMW F700GS
• BMW F800GS (2008 – 2012)
• BMW F800GS (2013 >)
• BMW F800GS Adventure (2014 >)

Manufactured in Stainless Steel 316L

The Rugged Roads Rear ABS Sensor Guard fits the following models:
• BMW F800GS (2008 – 2012)
• BMW F800GS (2013 >)
• BMW F800GS Adventure (2014 >)

This fully adjustable windscreen Spoiler is a perfect solution to reducing turbulence against your helmet.

The clamp mechanism is machined from aluminium and anodised to ensure a lasting finish, and the spoiler is easily fixed to your windscreen with a rubber lined clamp for a secure mount.

The Spoiler is fully adjustable both in height and angle – can be set in seconds, and secured by  camlock.

Dimensions of Spoiler Screen:

Height – 125mm

Width – 260mm

NEMO 2 was developed by the company COBRRA. It is a modern original device for chain lubrication that saves you money, and time relating to your chains maintenance, and provides you with the unique comfortable new feeling of a well oiled chain.

MAJOR FEATURES

NEMO 2 consists of three interconnected work chambers that provide the following:

• easy NEMO 2 application of oil
• continuous oil displacement under pressure, therefore uniform lubrication and maximum chain life
• lubrication of NEMO 2 internal parts in order to obtain a high reliability and longevity

NEMO 2 works on the principle of compressing the oil in the chamber and pressurising it through a valve and down the line onto the chain. Therefore it is not necessary to change the oil depending on the ambient temperature. It works reliably in warm and cold weather. The rider can apply the oil on to the chain when its required with a simple 1/4 turn of the Nemo 2 which will displace enough oil over a 3 minute period giving you up to 200 miles of lubrication after each 1/4 turn of the Nemo 2.

NEMO 2 is installed on the motorbike handlebars or frame and provides immediate chain lubrication whilst riding, for instance after:

• rides in the rain
• fast rides
• rides in a dusty environment
• certain mileage

ADDITIONAL NEMO 2 FEATURES

• Great return on investment on NEMO 2 compared to the cost of regular manual chain cleaning and lubrication
• Extraordinary time saving with regard to cleaning and lubrication compared to the manual art of chain maintenance
• Simple and fast installation without the need for electronics or vacuum feed to run the devise.
• Great quality & design made of light aluminium alloy and anodised
• simple, fast, and easy operation during riding, turn NEMO 2 in arrow direction by 90° and after 3 minutes application of oil the chain & sprockets are lubricated for up to 200 miles
• function of lubrication interruption in case of incidental stop during lubrication
• function of impurities wash out from the chain
• suitable for use in any conditions
• outstanding durability during the lifetime of the chain & sprockets resulting from the following:
  • immediate lubrication – of the chain & sprockets when you need it
  • uniform lubrication of the entire chain – the oil is continuously displaced under pressure
  • oil – the oil gets displaced to the intended location on the chain lubricating the 0-rings or x-rings
  • lubrication with ordinary 80W-90 transmission oil, adhesive oil for riding at high speed, BIO oil for riding wet roads, or any other suitable oil
• single NEMO 2 filling provides chain lubrication for up to app. 3 000 miles
• visual check of NEMO 2 filling level directly on the motorbike handlebars
• oil level alert – emergency oil reserve in NEMO 2 for app. further 300 miles
• simple and easily accessible oil filling directly from a large or small bottle
• reduction of chain power loss due to easy chain operation without stuttering
• low oil consumption – if the running motorbike is standing, the chain is not lubricated
• chain lubrication does not cause motorbike contamination by oil
• the hose is steadily directed towards the chain by means of hose rectifier made of light aluminium alloy
• oil distribution through inconspicuous thin black pressure hose

Function and operation principles of NEMO 2

• The lubrication procedure is performed during riding by twisting the NEMO 2 in the arrow direction by ¼ of revolution (recommended oil amount).
• The lubrication is accomplished after approximately 3 minutes of slow oil dissipation to the chain.
• The lubrication procedure shall be performed every 100 up to 200 miles depending on drive velocity, dustiness and meteorological conditions.  It is recommended to lubricate the chain after each refueling for the purpose of regularity.  After riding in rain and after cleansing the chain when the chain is free of lubricant completely, it is necessary to lubricate the chain (it is recommended to turn the NEMO 2 by ½ of revolution)
• When the lubrication procedure is performed and the motorcycle is to be stopped within 3 minutes incidentally, it is sufficient to slew the device against the arrow direction into the original position and the lubrication process is stopped.  After putting the motorcycle in motion, perform the lubrication procedure again.
• If the compartment of the NEMO 2 will not turn anymore it is empty and it will need to be refilled.
• Oil level of NEMO 2, fill to the top and fit the lid making sure the oil seal is in place.
• The stainless container may be used as ready-for-use oil.
• When following the recommended oil quantities, the chain will be lubricated optimally and the motorcycle chain will not have excess oil on it.

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile.

The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit.

Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch.

Our DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up. 

 
DENALI 2.0 Features 

• HiDrive High-Intensity Cree LED's 
• TriOptic Multi-Beam Lens System 
• DataDim LED Dimming Technology 
• HotSwap Modular Wiring Harness System
• DrySeal Submersible Waterproof Illuminated Switch
• DrySeal Submersible Waterproof Light Housings 
• Impact PC Corrosion-Proof Bezels
• LiveActive Intelligent Thermal Management
• Chrome Plated Optic Holders
• Low-Profile Mount with Stainless Steel Hardware
• Handlebar Switch Mounts Included
• E Mark Lenses Included

 
Features Explained:

HiDrive High-Intensity 10 Watt LED's:
2.0 lights feature the latest development from Cree; a new Hi-Intensity LED chip that features a redesigned primary optic to maximize light output through secondary optics. The “HI” series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw.  

TriOptic Multi-Beam Lens System:
2.0 Light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. 

Data Dim LED Dimming Technology:
All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.   Plug in our DataDim Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. 

Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming.     

HotSwap Modular Wiring Harness System:
Our premium wiring harness features high-quality waterproof components and our clever HotSwap design that enables an effortless swap from the standard single-intensity relay to our dual-intensity DataDim controller (sold separately). 

DrySeal Submersible Waterproof Illuminated Switch:
Our beefy, completely sealed, waterproof switch was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. It's clever design can be either flush or bar mounted. 

DrySeal Submersible Waterproof Light Housings:
In addition to molded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed.  

Impact PC Corrosion-Proof Bezels:
Our Impact PC bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode even after taking repeated impacts from rocks and debris. 

LiveActive Intelligent Thermal Management:
DENALI 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most. 

Chrome Plated Optic Holders:
We take the extra step to chrome plate our optic holders to maximize reflectivity and refine the appearance match the original chrome reflectors of your vehicle headlights. 

Low-Profile Mount with Stainless Steel Hardware:
DENALI 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. 

Handlebar Switch Mount Included:
Our versatile switch design can be either flush, perch, or bar mounted to your vehicle. DENALI 2.0 light kits include a ?” and 1” handlebar mount to provide an integrated mounting location for the light switch right out of the box. 

E Mark Approved Lenses
DENALI 2.0 kits include E Mark approved lenses

 
D2 Kit Product Specs:

• LED's: (2x) 10 Watt Cree XPL HI
• Power Draw: 1.6 Amps
• Beam Distance (Spot): 525 Feet
• Beam Width (Spot): 75 Feet
• Raw Lumens: 2190
• Intensity: Single Intensity Harness
• DataDim Compatible: Yes 
• Operating Voltage: 12 VDC
• Pod Size:  2.2" Round x 2.4" Deep

D2 Kit Contents

• (2x) LED Light Pods
• (2x) Spot Lenses (Installed)
• (2x) E Mark Approved Elliptical Flood Lenses (Included)
• (1x) HotSwap Single Intensity Wiring Harness
• (1x) DrySeal Waterproof Illuminated Switch
• (1x) 7/8" inch Handlebar Switch Mount
• (1x) 1 inch Handlebar Switch Mount
• (2x) Hinge Mounts with M8 Stainless Steel Hardware
• (4x) Zip Ties & (1x) Adhesive Mounting Square