Corrosion Block Grease has the same corrosion protection properties as ACF-50 but in grease form. Can be used as an assembly grease (for example did you know that the copper in copper grease corrodes alloy?) so use this for such things as engine/transmission cases, caliper bolts, wheel bearings, wheel axle bolts (which always seem to corrode), battery terminals, side and centre stands, foot pegs, brake and clutch lever pivots, etc. etc.

Corrosion Block is an anti-corrosion compound developed exclusively to stop existing corrosion and prevent new. It is unique in that it is designed for use in electrics and electronics as well as metals and structures. This makes this product essential for your day-to-day routine maintenance and as long-term asset protection for your boat/equipment within the harsh marine environment.

What will it actually do? It will, with regular applications, make maintenance easier and save you money, easier to clean, look better, help prevent surface/structural/electrical corrosion related failure thereby increasing reliability and it will increase the bike’s value. It will significantly reduce your replacement, repair and labour expenses. That’s what it will actually do!

The Facts:
• KILLS existing corrosion
• PREVENTS new from forming
• Long lasting LUBRICANT
• APPROVED for ELECTRONICS
• Non-Toxic & Environmentally Friendly

Where to use it

Corrosion Block is simply applied to the structure, joints and welds, i.e. under hidden areas, where the corrosion works away un-noticed, under panels and on hidden parts of the engine, gear boxes, generators, switch panels and avionics, especially on outboard engines where it will work hard to prevent corrosion and structural degeneration. Where corrosion is already evident it will help inhibit further progress by insulating and electrically ‘switching off’ the corrosion cell. It will also penetrate around bolts, screws and hardware, protecting them from electrolytic corrosion and preventing seizure.

It will protect electrical joints, plugs and components and prevent corrosion causing high resistance joints. This goes for PCB’s and electronics as well, such as computerised ignition and fuel control units and their multi pin plugs, radio’s, radar and antenna’s, while switches, controls and levers will all be lubricated as well as protected from corrosion. It does not affect the working of electrical or electronic components however keep it off LCD’s. Multi pin plugs and connectors benefit from having Corrosion Block applied directly to the contacts. Corrosion Block has restored many a failed electronic/electrical component. It’s uses are unending, you will love it!

Want to give even more protection to your expensive headlights?  You can now fix both our aluminium and polycarbonate headlight guards together.  And, in buyng the 2 together you get a great discount.

We have redesigned our headlight guard to give even more protection to your headlights without defusing the effectiveness of the lights.

The Double Protection Guards have been designed by Rugged Roads and manufactured right here in the UK.

What's included in the Double Protection Headlight Guard:
- 1 x blasted stainless steel, laser cut headlight guard.
- 1 x laser cut polycarbonate headlight guard.
- 2 x fixing arms.
- All fixings required to fit the 2 guards.

This item fits the following models:
- BMW F800GS - 2008 - 2012
- BMW F800GS - 2013 onwards
- BMW F800GSA - 2013 onwards
- BMW F650GS (Twin) - 2007 - 2012
- BMW F700GS - 2013 onwards

Hella Micro DE lights are great on your bike. We absolutely love them and have them fitted on all of our bikes. After a couple of spills and having to replace them, we decided to design and manufacture some guards for these lights. Price is for a set of 2.

The Hella Micro De Light Guards are designed by Rugged Roads and made in Britain from coated aluminium.

Colour - Matt Black

These light guards are suitable for use with the standard Hella Micro DE Fog and Driving Lights - but NOT the xenon versions as they have a larger external casing. They will fit on any light mounting bar.

Fitting is easy as you just slot the lights into them and attach to your light bar with the fittings that came with the light.

Fits all models of bike.

The Hella Micro De Light Guards are designed by Rugged Roads and made in Britain from coated aluminium.

Colour - Matt Silver

These light guards are suitable for use with the standard Hella Micro DE Fog and Driving Lights - but NOT the xenon versions as they have a larger external casing. They will fit on any light mounting bar.

Fitting is easy as you just slot the lights into them and attach to your light bar with the fittings that came with the light.

Fits all models of bike.

Dakar Leather Toolbag

This bag is an exact replica of the leather toolbags that competitors used in the Dakar during the 1980’s.

Manufactured locally in the New Forest by a Master Saddler in 5mm English Oak Bark Tanned Bridle Leather and 100% hand stitched, this is a very high quality Toolbag that will last you a lifetime.  We will also provide a tin of leather care so you can keep it in tip top condition.

The top of the bag is double-folded with strong velcro, giving exta durability and weather resistance.  Strap buckles are brass.

Base of the bag is additionally strengthened with a handstitched 5mm leather patch, meaning it won't lose shape or wear away when in use.

To attach to your bike, just pop the 2 straps under your rack and it's ready to go.

Approximate size is 20cm long (front to rear), 26cm wide (left to right), and 14cm high (top to bottom).  Please note that sizes may vary slightly as each is handcut and stiched.

The Rugged Roads Chain Guard is a significant upgrade over the plastic stock piece.
The chain guard is precision manufactured from a single piece of aluminium to provide superior strength without adding significant weight, and has an anodised finish which is extremely resistant to weathering.
The chain guard protects the chain from debris, and also protects the rider in the event of a broken chain.

Rugged Roads manufactured motorcycle accessories are 100% designed and manufactured in the United Kingdom.

Available in anodised silver or black finish.

This Chainguard fits the following models:
• BMW F650GS (Twin)
• BMW F700GS
• BMW F800GS (2008 – 2012)
• BMW F800GS (2013 >)
• BMW F800GS Adventure (2014 >)

The Rugged Roads Chain Guard is a significant upgrade over the plastic stock piece.
The chain guard is precision manufactured from a single piece of aluminium to provide superior strength without adding significant weight, and has an anodised finish which is extremely resistant to weathering.
The chain guard protects the chain from debris, and also protects the rider in the event of a broken chain.

Rugged Roads manufactured motorcycle accessories are 100% designed and manufactured in the United Kingdom.

Available in anodised silver or black finish.

This Chainguard fits the following models:
• BMW F650GS (Twin)
• BMW F700GS
• BMW F800GS (2008 – 2012)
• BMW F800GS (2013 >)
• BMW F800GS Adventure (2014 >)

Made of 4mm anodised aluminium, our skid plate gives protection to the oil filter, catalytic converter and header pipes. It closely conforms to the underside of your bike for protection that doesn’t sacrifice ground clearance.

This design is fully precision welded, creating a strong unit that deflects dangerous debris away from your bike. It attaches using the BMW OEM fasteners that are completely protected, eliminating the possibility of snags.

Stainless steel 316L brackets are included for mounting, which maintain the original BMW OEM rubber mounts for ensured engine safety. The brackets extend the life of the rubber mounts by providing an extra cushion on bumpy rides, whilst also keeping the skid plate from twisting and shearing the mounts.

No matter where you ride, you can keep going without worry by installing the Rugged Roads Skid Plate.

Available in anodised Silver and anodised Black.

• Compatible with OEM BMW centre stand
• Compatible with OEM BMW crash bars
• Compatible with Givi crash bars
• Compatible with Touratech crash bars
• Compatible with SW Motech crash bars
• Compatible with Adventure-Spec crash bars
• Compatible with AltRider crash bars
• Extremely lightweight anodised aluminium 5251-H22 construction, no heavy steel
• All corners radiused – no sharp bits to snag on trail debris
• 6 mounting points to distribute impact loading
• Easy to install; all mounting brackets have stainless steel threaded hex inserts installed – no loose nuts!
• Mounting points for optional Skid Plate Tool Box

This Skid Plate fits the following models:
• BMW F650GS (Twin)
• BMW F700GS
• BMW F800GS (2008 – 2012)
• BMW F800GS (2013 >)
• BMW F800GS Adventure (2014 >)

Colour - Matt Black

The Rugged Roads Left Hand Heel Protector fits the following models:
• BMW F650GS (Twin)
• BMW F700GS
• BMW F800GS (2008 – 2012)
• BMW F800GS (2013 >)
• BMW F800GS Adventure (2014 >)

Colour - Silver

The Rugged Roads Left Hand Heel Protector fits the following models:
• BMW F650GS (Twin)
• BMW F700GS
• BMW F800GS (2008 – 2012)
• BMW F800GS (2013 >)
• BMW F800GS Adventure (2014 >)