Protect your expensive headlight from stonechips.

Manufactured with black stainless steel side frames, vapour blasted stainless steel headlight guard, clear 4mm polycarbonate headlight guard with an angled top edge to reduce light flare,and stainless steel fixings, this guard will outlast your bike.

For cleaning your headlight, the side frames remain on the bike, with only 4 flange bolts needed to undo to remove the guard. There are no fiddly nuts to lose as we have used stainless nutserts to hold the bolts when the guard is mounted.

This item fits the following models:
BMW R1200GS/GSA LC – From 2013
BMW R1250GS/GSA - From 2019 

Set of Number Plate Bolts with nuts - 2 x Yellow and 2 x Black

This fully adjustable windscreen Spoiler is a perfect solution to reducing turbulence against your helmet.

The clamp mechanism is machined from aluminium and anodised to ensure a lasting finish, and the spoiler is easily fixed to your windscreen with a rubber lined clamp for a secure mount.

The Spoiler is fully adjustable both in height and angle – can be set in seconds, and secured by  camlock.

Dimensions of Spoiler Screen:

Height – 125mm

Width – 260mm

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile.

The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit.

Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch.

Our DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up. 

 
DENALI 2.0 Features 

• HiDrive High-Intensity Cree LED's 
• TriOptic Multi-Beam Lens System 
• DataDim LED Dimming Technology 
• HotSwap Modular Wiring Harness System
• DrySeal Submersible Waterproof Illuminated Switch
• DrySeal Submersible Waterproof Light Housings 
• Impact PC Corrosion-Proof Bezels
• LiveActive Intelligent Thermal Management
• Chrome Plated Optic Holders
• Low-Profile Mount with Stainless Steel Hardware
• Handlebar Switch Mounts Included
• E Mark Lenses Included

 
Features Explained:

HiDrive High-Intensity 10 Watt LED's:
2.0 lights feature the latest development from Cree; a new Hi-Intensity LED chip that features a redesigned primary optic to maximize light output through secondary optics. The “HI” series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw.  

TriOptic Multi-Beam Lens System:
2.0 Light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. 

Data Dim LED Dimming Technology:
All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.   Plug in our DataDim Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. 

Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming.     

HotSwap Modular Wiring Harness System:
Our premium wiring harness features high-quality waterproof components and our clever HotSwap design that enables an effortless swap from the standard single-intensity relay to our dual-intensity DataDim controller (sold separately). 

DrySeal Submersible Waterproof Illuminated Switch:
Our beefy, completely sealed, waterproof switch was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. It's clever design can be either flush or bar mounted. 

DrySeal Submersible Waterproof Light Housings:
In addition to molded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed.  

Impact PC Corrosion-Proof Bezels:
Our Impact PC bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode even after taking repeated impacts from rocks and debris. 

LiveActive Intelligent Thermal Management:
DENALI 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most. 

Chrome Plated Optic Holders:
We take the extra step to chrome plate our optic holders to maximize reflectivity and refine the appearance match the original chrome reflectors of your vehicle headlights. 

Low-Profile Mount with Stainless Steel Hardware:
DENALI 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. 

Handlebar Switch Mount Included:
Our versatile switch design can be either flush, perch, or bar mounted to your vehicle. DENALI 2.0 light kits include a ?” and 1” handlebar mount to provide an integrated mounting location for the light switch right out of the box. 

E Mark Approved Lenses
DENALI 2.0 kits include E Mark approved lenses

 
D2 Kit Product Specs:

• LED's: (2x) 10 Watt Cree XPL HI
• Power Draw: 1.6 Amps
• Beam Distance (Spot): 525 Feet
• Beam Width (Spot): 75 Feet
• Raw Lumens: 2190
• Intensity: Single Intensity Harness
• DataDim Compatible: Yes 
• Operating Voltage: 12 VDC
• Pod Size:  2.2" Round x 2.4" Deep

D2 Kit Contents

• (2x) LED Light Pods
• (2x) Spot Lenses (Installed)
• (2x) E Mark Approved Elliptical Flood Lenses (Included)
• (1x) HotSwap Single Intensity Wiring Harness
• (1x) DrySeal Waterproof Illuminated Switch
• (1x) 7/8" inch Handlebar Switch Mount
• (1x) 1 inch Handlebar Switch Mount
• (2x) Hinge Mounts with M8 Stainless Steel Hardware
• (4x) Zip Ties & (1x) Adhesive Mounting Square

Protect your investment.

To prevent dirt, dust and mud from clogging up the shock absorber it can be protected with an Öhlins shock cover. 

The flexible neoprene material is an effective blocker and it fits the majority of Dual Sport Shock Absorbers such as:

• Honda Africa Twin 
• BMW GS range,
• KTM Adventure,
• Husqvarna Norden 901
• Yamaha Tenere,
• Triumph Explorer

FEATURES:

• 3mm Neoprene material.
• Easy installation with elastic seam and velcro fitting.
• Black with white printing.
• Easy to take away and clean
• Protects your suspension units from stone, sand, mud, snow and ice etc.

TECH. SPECIFICATION

• Height 300mm circumference 270mm

Buzetti Tyre Levers - Set of 3 - 00-962

The best tyre levers you can get!

This set of 3 levers is 240mm long and includes a spoke loop (spare finger) to hold one lever in place whilst you handle the other two levers.

UNI Foam Air filters give the maximum protection in avoiding the problem of fine dust and dirt particles getting through the air filter and into the intake system with potentially serious consequences for your engine.

Desert racers have been relying on these reusable foam air filters for years as no paper filter can provide the same amount of protection in the dirt - UNIFilter manufacture filters for KTM, Yamaha and Suzuki.

The filters can be washed and re-used pretty much indefinitely, keeping your engine safe and letting it breathe to its maximum potential.

If you ride off-road, don't take any risks with the corrugated paper air filters in your BMW.

Designed, developed, manufactured, and extensively tested in Australia - where they know a bit about dust and dirt!!

Kit includes:

• 1 x two stage filter in housing
• 1 x two stage replacement pre-oiled panel filter
• 2 x Snorkel Intake Pre-Cleaners.

This is the best air filter option available for your BMW R1200GS LC and R1250GS

Designed, tested & made in Australia to protect your GS's engine from the world's harshest conditions.

Used by BMW Australia on all their BMW GS Safari bikes.

This complete kit for the BMW contains the main two stage filter and and 2 x pre-filter snorkel inserts.  

• Fits the following BMW models:
  • BMW R1200GS from 2013-2018
  • BMW R1200GS Adventure from 2014-2018
  • BMW R1250GS from 2018 onwards
• Best possible protection for fine dust, sand & dirt
• Washable and Reusable
• Made in Australia by UNIFilter

This air filter kit is fully servicable.

What's in the kit:

• 1 x Main filters
• Spare Foam Inserts
• 2 x removable coarse foam pre-filters

About UNIFilter

UNIFilter Australia is a totally Australian-owned family company business.

The company commenced operations in 1976 as an importer of motorcycle air filters and components. In 1988 the company commenced production in its’ then Sydney factory. By 1991 it had outgrown the original Sydney factory and moved the operation to Hornsby. In 2006, again the production had outgrown the factory and warehouse so the production, warehousing and administration was moved to the New South Wales Central Coast into 2 purpose built factory units. Today the production is operated using state of the art CNC laser and router equipment to provide not only our “Unifilter” brand but original equipment filters for Yamaha, Suzuki, Nitto, Stihl and KTM.

We are a company proud of our capabilities, providing not only manufactured air filters but providing design and technology for many automotive and industrial companies. We only use premium raw materials in our manufacturing process and wherever possible support “Australian Made” in our materials and packaging.

For everything you need quickly to hand but that still requires the best protection - with practical sight window for operating multimedia devices.

This means all the available space can be used. The large main pocket is closed with a water-deflecting and dirt-proof zip closure. To make sure mobiles, etc. can be charged on the go, the bag comes with a water-proof E-Connect cable input. Integrated reinforcements, vibration-absorbing lining and complex two and three-layer structure provide stability under all conditions.

This bag is an evolution of our current handlebar bag, which is a big step by us towards water-proofing. We've swapped the top and the whole flap for water-deflecting truck tarpaulin material and welded the mobile phone pocket. This provides perfect protection for the mobile phone.

The facts for the BarBag Media handlebar bag:

• Easy to fit/detach
• Secure grip in all conditions
• Media slot for L devices up to approx. 160 x 85 x 10 mm (HxWxD)
• The attachment mechanism also makes it suitable for smaller devices.
• Water protected cable access
• Additional holder and pocket in flap interior
• Stable form even when empty
• Quick handlebar attachment
• Water and dust resistant zip closures
• Padded and with interior lining
• Carry belt
• Water-repellent, fluorocarbon-impregnated CORDURA fabric
• Bag flap made of robust, water-tight tarpaulin material with welded slot

Features

• Made in Europe
• 5 year warranty

Dimensions ( L / W / H ) in cm:

• 33 x 8 x 12

Volume in liters (circa):

• 2,5

Oxford Protex Stretch Outdoor Premium Stretch-Fit Cover - XL 

Fits all large Dual Sport / Adventure Bikes:

• Honda Africa Twin - XRV and CRF Range
• BMW GS & GSA Range
• KTM Adventure Range

Description:

• Lock pouches (front & rear) keep your padlock off the ground
• Water-resistant seams
• Soft lining protects against scratches
• Ventilated to reduce condensation
• Reflective panels & logos increase visibility at night
• Tough 3 layer material protects against weather & light knocks
• Elasticated bottom & adjustable belly strap to hold the cover in place
• Strategically positioned holes facilitate the use of a lock (front & rear)
• Clear window for Oxford Solariser battery charger.
• Rear window to show number plate (optional)

IMPORTANT: Do not allow this cover to come into contact with hot exhausts, engine parts or sharp objects

Size - X-Large

• Length: 277CM
• Width: 104CM
• Height: 141CM

Oxford Stormex Outdoor Premium Cover - XL 

Fits all large Dual Sport / Adventure Bikes:

• Honda Africa Twin - XRV and CRF Range
• BMW GS & GSA Range
• KTM Adventure Range

Description:

• Externally bonded seams for maximum rain protection
• Ventilated to reduce condensation
• Tough outer protects against weather & knocks
• Soft heat-resistant lining protects against scratches
• Reflective panels increase visibility at night
• Adjustable belly strap holds it in place
• UV colourfast solution dyed fibres
• Rubber taping with UV protection
• Heat resistant lining material in case of momentary contact with exhaust
• Wrap around splash protector prevents water from being absorbed up the lining
• Lock pouch helps to keep your padlock off the ground
• Strategically positioned holes facilitate the use of a lock; lock pouch helps to keep your padlock off the ground
• Rear window allows the number to be visible, but an internal 'curtain' enables it to be covered
• Front inner pocket with PVC window to hold a solar panel charger 

IMPORTANT: Do not allow this cover to come into contact with hot exhausts, engine parts or sharp objects

Size - X-Large

• Length: 277CM
• Width: 104CM
• Height: 141CM