The windshield of the GS seems to be very unstable, which in the long run can lead to irritation and dangerous distractions.

This mounting adapter effectively stabilizes the windshield and replaces the original BMW GPS bracket. The bracket is wide enough for you to be able to position a GPS unit, for example, wherever you want. You can thus position your GPS unit properly above the instruments of your BMW.

It is fitted to the original attachment points, while the height adjustment is naturally retained.

Compatible with original BMW and Touratech windshields.

Headlight Protector for original BMW LED "Nano" Headlight, Set, black (08/2017-) *OFFROAD USE ONLY*

This protector made of stainless steel can be easily mounted on the original BMW LED "Nano" auxiliary headlights.

The headlight protector has been developed for off-road use and is not permitted in the scope of German StVO. Please check your national regulations!

Set for left and right!

Headlight protector Makrolon Typ 2 with quick release fastener for BMW R1250GS/ R1250GS Adventure/ R1200GS from 2013/ R1200GS Adventure from 2014 with LED headlight *OFFROAD USE ONLY*

Touratech headlight protector has been thoroughly tried and tested over the years - they've sold thousands. Even the biggest stones won't be able to damage your headlight with this!

New durable makrolon model now available with quick release fastener!
Now you can clip on the headlight protector and detach it again as needed. Just bolt the sturdy and secure side struts.
Makrolon pane is shatter-proof and virtually indestructible!

And of course the protector comes with everything you need to fit it.

• - superbly suited for full LED headlights with daytime light as it does not affect cooling
• - suitable for all types of headlights of this vehicle model

The headlight protector has been developed for off-road use and is not permitted in the scope of German StVO. Please check your national regulations!

Stainless steel headlight protector with quick release fastener for LED headlight, for BMW R1250GS/ R1250GS Adventure/ R1200GS from 2013 *OFFROAD USE ONLY*

Touratech headlight protector has been thoroughly tried and tested over the years – They’ve sold thousands. Even the biggest stones won’t be able to damage your headlight with this!

New durable stainless steel model now available with quick release fastener!
Now you can clip on the headlight protector and detach it again as needed. Just bolt the sturdy and secure side struts.

And of course the protector comes with everything you need to fit it.

The headlight protector has been developed for off-road use and is not permitted in the scope of German StVO. Please check your national regulations!

Optimal hand protection for the original protectors. Very useful and pleasant in rain, snow, hail and cold. The spoilers are made out of resistant and light synthetic. Easy to fix!

Very useful accessories for the GS-biker.

Included: left and right

Minimum color deviations possible!

Rear brake fluid reservoir guard for BMW R1250GS/ R1250GS Adventure/ R1200GS from 2013/ R1200GS Adventure from 2014/ R1200R from 2015/ R1200RS

On the BMW the brake fluid reservoir is all too easily accessible, putting it at risk of damage or tampering.

Made from laser-cut aluminium, Touratech’s brake fluid reservoir guard effectively prevents damage and undesired access to the reservoir lid, yet you can still easily see the fluid level.

The guard simply bolts onto the existing mounting point.

Not suitable for equipment variants with original BMW frame protection!

Stainless steel radiator protector, black, BMW R1250GS/ R1250GS Adventure

BMW is going to rely on water cooling in new boxer engines as well from 2013. This means that optimum performance can be combined with a long service life. With its technically perfect implementation, the system has just one weak point: the sensitive radiator.

The Touratech radiator protector shields the vulnerable lamellae of the radiator against damage and thus provides an enormous safety benefit!
The dread of flying stones, sticks or other debris will be no more. A small investment will make your trip a whole lot safer!

Optically unobtrusive yet in the unmistakeable Touratech-style, the radiator protector made of laser cut, black powder coated stainless steel blends in with the GS design perfectly.

Parts supplied: 2 parts (left and right)

Note: The radiator cover can cause the engine to overheat under extreme conditions with high outside temperatures and an extreme engine load.

Please watch your water temperature gauge.

ABS sensor protection, front for BMW R1250GS/ R1250GS Adventure/ R1200GS from 2013/ R1200GS Adventure from 2014/ S1000XR/ R1250RT/ R1200RT from 2014

ABS cannot function without information about the wheel speed. Proper protection for the sensitive wheel speed sensors is therefore essential, especially on machines that often travel on rough ground.

The shapely guard made of stainless steel protects the front ABS sensor from coarse dirt and stones.

"Works" long-distance low foot pegs 

Fit the following models:

• BMW R1300GS - From 2023
• BMW R1250GS - All Years
• BMW R1250GSA - All Years
• BMW R1200GS  -  From 2013
• BMW R1200GSA - From 2004
• BMW F850GSA - All Years
• BMW R850GS - All Years
• BMW F700GS - All Years

Touratech WORKS stainless steel foot pegs. The best that Touratech has to offer for your boots. Specially developed to meet the specifications of the Touratech works racing team.

The characteristic shape of the 52 x 90 mm wide and 4 mm thick stainless steel claw profile is kind to your boots and offers the perfect combination of grip and self-cleaning. The rounded edges prevent damage to the boot soles, the open design allows clay and stones in the tread to fall through the foot pegs, while the boot profile has a sure hold on the peg. The slender design and outward chamfering allow for better ground clearance, which is a great asset when riding along deep ruts compared to regular enduro foot pegs or standard products.

Note: The footpegs are 20 mm lower than the originals (without rubber pad).

The Touratech Works foot pegs have been specially strengthened at the mounting point, making them significantly less susceptible to impacts. The Works products are an optical highlight as well. Blasted stainless steel with a special laser inscription makes this product really stand out, as well as giving a visual indication of its noble origins in extreme enduro sport.

• - 52 mm wide and 4 mm thick stainless steel claw profile that is kind to your boots
• - Perfect combination of grip and self-cleaning
• - With a more slender design for better ground clearance
• - Significantly less susceptible to impacts
• - Strengthened mounting point
• - With a blasted surface and laser inscription for a superior finish
• - German ABE Type Approval

Gear lever length adjustable and foldable for BMW R1250GS/ R1250GS Adventure/ R1200GS (LC) / R1200GS Adventure (LC)

Often it is just little things that are necessary to achieve the optimum ride experience. Take the original GS gear lever, for instance, the height could be adjusted but not the length.

The Touratech gear lever can be adjust to your foot precisely and, due to being foldable, doesn't break off every time you tip over either. In addition, this gear lever, made from a high quality aluminium stainless steel material mix, optically upgrades your GS!

Adjustment range: 32 mm