Your oil cooler is in a vulnerable place and any damage from stones or other detritus could prove costly. Fit one of our oil cooler guards for added protection and peace of mind

Our Oil Cooler Guard is made in Britain from BS1470 5251-H22 Aluminium.

Colour - Matt Silver

This item fits:
- All R1150GS Models.
- All R1150GSA Models.

Our Oil Cooler Guard is made in Britain from BS1470 5251-H22 Aluminium.

Colour - Matt Black

This item fits:
- All R1150GS Models. - All R1150GSA Models.

Mount the rear splashguard underneath your numberplate and it will help stop tyre spray getting up under those difficult to clean places.

The lip creates an aerodynamic force that keeps your rear end cleaner!

Material - Aluminium.

Colour - Matt Black

Fits the following models:
- R1200GS - All Models Up To & Including 2012
- R1200GSA - All Models Up To & Including 2012
- R1150GS - All Models
- R1150GSA - All Models
- F650GS Single
- F650GS Dakar
- G650GS
- G650GS Sertao

The Rear Brake Reservoir Guard is made in Britain from BS1470 5251-H22 Aluminium.

Colour - Matt Black

This item fits the following models:
- All R1150GS Models.
- All R1150GSA Models.

Give complete all round protection to your rear brake reservoir - protecting it from both damage and tampering. Our robust Rear Brake Reservoir Guard made from silver anodised aluminium.

The Rear Brake Reservoir Guard is made in Britain from BS1470 5251-H22 Aluminium.

Colour - Matt Silver

This item fits the following models:
- All R1150GS Models.
- All R1150GSA Models.

These decals are made from highly reflective vinyl

Size 90mm wide x 125mm high

These decals are made from highly reflective vinyl

Size 90mm wide x 125mm high

Black Closed Cell Single Sided Self Adhesive Neoprene Foam Tape.

This is a high quality single sided tape - closed celled - manufactured from medium hardness foam.

An acrylic pressure sensitive adhesive is coated on one side - with a paper release liner on the adhesive face.

This material will act as a water-seal and air/dust seal when compressed by 30%.

APPLICATIONS:
- Forms a compression water seal and forms a compression air / dust seal.
- General purpose gap filling.
- Cushioning and anti slip mounting.

PRODUCT BENEFITS:
- Service temperature –30°C to +70°C
- Good resistance to dilute acids & alkalis
- Paper release liner on the adhesive face - reducing dimensional change during application
- Very good Ultra violet {UV} Light resistance
- Resistance to abrasion - corrosion and moisture
- Suitable for motorbike environment.

Each roll is 19mm wide x 5mm thick x 2 metres long.

Made in our factory in the UK the Rear Brake Master Cylinder Guard is manufactured from Aluminium.

Colour - Matt Silver

This item fits the following models:
- R1200GS - All Models
- R1200GSA - All Models
- R1150GS - All Models
- R1150GSA - All Models

If you're travelling without your rear seat; or you just want a more secure fitting toolbox cover - you can't beat our locking toolbox cover.

The cover is made from 3mm aluminium with a secure lock. We have also fitted a locking plate which is moved depending on whether you have the rear seat fitted or not.

Made from 3mm aluminium in our UK factory.

Colour - Matt Silver

With the rear seat on - loosen the M5 nut on the back of the 2mm aluminium powdercoated locating plate and slide round to the locating pins; tighten the nut and fit the toolbox cover.

Without the rear seat - loosen the M5 nut on the back of the 2mm aluminium powdercoated locating plate and slide round to the locating pins to cover the seat fixing hole. Tighten the nut and fit the toolbox cover.

This item fits the following models:
- BMW R1100GS All Models
- BMW R1150GS All Models