For those riding in cooler climes, these are the perfect answer to enable you to keep riding during even the coldest temperatures.

They are self-supporting, and won't collapse back against the levers, so can be fitted to your standard bars - but also they are fully compatible with existing Barkbuster hardware - so all you need to do is unscrew and remove your plastics and fit these over the existing aluminium backbone.

Now you can wear your summer gloves, and feel the full benefit of your heated grips during the winter months.

Description

• Stylish fabric handguard design, lined with a waterproof membrane.
• Can be fitted to almost any handlebar set up.
• Flexes around fairing/windscreen at full steering lock.
• Ideal for faired Sports and Touring motorcycles.
• Anti-flap design is self-supporting under wind pressure.
• Leaves controls free of interference.
• Maximum cold weather protection.
• Can be fitted independently or over existing Barkbusters backbones.

All mounting hardware included to fit:

• To handlebar weight;
• To hollow handlebar; and
• Over existing Barkbusters backbones.

FITTING INSTRUCTIONS

Black Closed Cell Single Sided Self Adhesive Neoprene Foam Tape.

This is a high quality single sided tape - closed celled - manufactured from medium hardness foam.

An acrylic pressure sensitive adhesive is coated on one side - with a paper release liner on the adhesive face.

This material will act as a water-seal and air/dust seal when compressed by 30%.

APPLICATIONS:
- Forms a compression water seal and forms a compression air / dust seal.
- General purpose gap filling.
- Cushioning and anti slip mounting.

PRODUCT BENEFITS:
- Service temperature –30°C to +70°C
- Good resistance to dilute acids & alkalis
- Paper release liner on the adhesive face - reducing dimensional change during application
- Very good Ultra violet {UV} Light resistance
- Resistance to abrasion - corrosion and moisture
- Suitable for motorbike environment.

Each roll is 19mm wide x 2mm thick x 2 metres long.

• The highly elastic material perfectly follows your bike's contours. 
• Breathable, Ultra-soft, close-fitting and paint-friendly, this cover completely surrounds and protects your bike. 
• Perfectly held in place by the elasticated material, with an additional elastic cord running all the way around the base of the cover, leaving no chance for dust and dirt to land on your pride and joy. 
• Bright Red in colour with a contrasting Black stripe across the top.
• Perfect fit for all large capacity Dual Sport bikes, even with panniers fitted

• Length: 228 cm
• Width: 99 cm
• Height: 124 cm

Practical storage space and waterproof smartphone holder - always within reach!

The highlight of the Touratech "Ibarra Smart" is the waterproof compartment for all common smartphones (up to approx. 9x16 cm). The fully sealed pocket offers an optimal view of the screen and even allows the operation of most smartphones. The mobile phone is inserted from the inside. Thanks to a small opening you can connect your charging cable.

Once open there is a large, weatherproof main compartment (approx. 2.4 litres) for first aid kits, high-visibility vests or sunglasses. A further, smaller compartment allows quick access to important documents and other small items. The yellow lining helps you to find the contents of the bag more easily.

A key feature is that ther bag doesn't in any way restrict the rider's movements or affect control of the bike. The use of certified Cordura guarantees highest material quality.

Dimensions: (L x W x H) approx. 33/17 x 8 x 13 cm
Volume: approx. 2.4 litres

Touratech's smallest ever compressor and repair kit, the Scout is the perfect travel companion for motorcycle touring where size matters.

The ResQ Scout Tyre Repair Kit is designed for motorcycles and ATV’s where space and weight are important factors. Weighing in at only 584g, the system easily fits into a bag or under-seat compartment for ultimate convenience and simplicity. With the bottle in place, the complete kit measures only 100mm x 75mm x 100mm.

• Ideal for motorcycles and ATV’s
• Same solution supplied to leading vehicle manufacturers
• High performance 12v compressor with cigarette lighter fitting
• Precision analogue gauge with PSI/ Bar indication
• Selection of nozzle accessories and built in deflate button
• 100 ml long lasting tyre sealant
• Fixes punctures up to a diameter of 6 mm
• Water based sealant easily washes out of tyre to allow for full tyre repair
• Non toxic, non corrosive, TPMS safe and approved by the largest automotive manufacturers in the world.
• Suitable for all vehicle brands
• Canvas carry case for tidy and simple storage

Items included in this kit:

• Connections for the power supply 12 V
• 4 clamps
• Compressor
• 100 ml tyre sealant

You can use the AirMan Tour to inflate motorcycle and bicycle tyres.

In addition to its handy portable and lightweight design, its high performance air compressor enables rapid inflation of tires.

Specifications:

• 12V DIN plug
• Built-in pressure gauge with psi and bar indication
• Deflate button
• Adaptors for bicycle tires, balls, and inflatable toys
• With 3,40 m long cable
• Max power 5 bar

Measurements: 152 x 120 x 60 mm

Examples:

• 4,0 bar in 1 minute (for example bike tires)
• 2,5 bar in 4 minutes (for example motorbike with tire volume of 15 Litres)
• 2,5 bar in 6,5 minutes (for example a car with tire volume of 25 litres)
• 2,5 bar in 8,5 minutes (for example a car with tire volume of 36 litres)

Touratech WORKS stainless steel foot pegs. The best that Touratech has to offer for your boots. Specially developed to meet the specifications of the Touratech works racing team.

The characteristic shape of the 52 x 90 mm wide and 4 mm thick stainless steel claw profile is kind to your boots and offers the perfect combination of grip and self-cleaning. The rounded edges prevent damage to the boot soles, the open design allows clay and stones in the tread to fall through the foot pegs, while the boot profile has a sure hold on the peg. The slender design and outward chamfering allow for better ground clearance, which is a great asset when riding along deep ruts compared to regular enduro foot pegs or standard products.

Note: The footpegs are 20 mm lower than the originals (without rubber pad).


The Touratech Works foot pegs have been specially strengthened at the mounting point, making them significantly less susceptible to impacts. The Works products are an optical highlight as well. Blasted stainless steel with a special laser inscription makes this product really stand out, as well as giving a visual indication of its noble origins in extreme enduro sport.

- 52 mm wide and 4 mm thick stainless steel claw profile that is kind to your boots
- Perfect combination of grip and self-cleaning
- With a more slender design for better ground clearance
- Significantly less susceptible to impacts
- Strengthened mounting point
- With a blasted surface and laser inscription for a superior finish
- German ABE Type Approval

This item fits the following models:

• BMW R1150GS
• BMW R1200GS Up To 2012
• BMW R1200GSA Up To 2013
• BMW R80GS
• BMW F8000GS All Years

Black Closed Cell Single Sided Self Adhesive Neoprene Foam Tape.

This is a high quality single sided tape - closed celled - manufactured from medium hardness foam.

An acrylic pressure sensitive adhesive is coated on one side - with a paper release liner on the adhesive face.

This material will act as a water-seal and air/dust seal when compressed by 30%.

APPLICATIONS:
- Forms a compression water seal and forms a compression air / dust seal.
- General purpose gap filling.
- Cushioning and anti slip mounting.

PRODUCT BENEFITS:
- Service temperature –30°C to +70°C
- Good resistance to dilute acids & alkalis
- Paper release liner on the adhesive face - reducing dimensional change during application
- Very good Ultra violet {UV} Light resistance
- Resistance to abrasion - corrosion and moisture
- Suitable for motorbike environment.

Each roll is 19mm wide x 2mm thick x 10 metres long.

THIS ITEM IS CURRENTLY UNAVAILABLE FROM PUIG

Puig Multi-Adjustable Clip-On Visor 2.0 - Light Smoke

Puig launches its new 2.0 multi-adjustable visor with the firm intention of improving the user aerodynamic protection, as well as protecting us from inclement weather or possible impacts that we may find during our route.

Designed under a minimalist line and made of polycarbonate with an anti-scratch finish, the piece will be firm, resistant and with a very high clearness that allows perfect vision through it.

Its special design and measurements (300mm wide and 130mm high) are optimal for acting as a screen against gusts of wind, diverting it from sensitive areas such as the rider's helmet and torso.

In addition, it avoids possible turbulence and sounds that can disturb or distract while riding. The user will be able to adapt the visor in up to 4 rotation positions, which together with the guides that allow its height to be adjusted by 100, become infinite positions that allow it to be adjusted to your height or preferences.

The particularity of the Clip-on model is its removable anchoring, by means of clips, which allow a reliable fixing to the windshield of our motorcycle, whatever its curvature.

After the installation of it, you will be able to adjust the visor with your hand to the position you want without the need of additional tools. 

The new 2.0 multi-adjustable visor, "Clip-on" version, substantially improves the aerodynamic adaptability of your motorcycle, providing all the necessary comfort to enjoy the route. It allows to place it in infinity of different positions to adapt to the needs of each user.

Its simple shapes are specifically designed to deflect gusts of wind that hit sensitive areas of the rider, in addition to avoiding possible impacts and protecting you from inclement weather. On the other hand, it adapts perfectly to the aesthetic line of your motorcycle.

Puig offers the possibility of choosing the visor in clear or light smoked material.

Entirely designed and manufactured in Barcelona under the latest technology, the new 2.0 multi-adjustable visor is made of injected polycarbonate with anti-scratch treatment, high clearness and maximum resistance to possible impacts.

Its rounded contour has been designed to guarantee maximum safety, always complying with the most demanding European safety regulations.

The measurements of the visor are 300mm wide x 130mm high, with a distance between guides of 200mm, so as not to interfere with the view through.

This item fits the following models:

• BMW F800GS - All years
• BMW R850GS
• BMW R100GS
• BMW R1100R
• BMW R1150GS
• BMW R1200GS
• BMW R1200GSA
• BMW R80GS
• BMW R100GS

Touratech WORKS stainless steel foot pegs. The best that Touratech has to offer for your boots. Specially developed to meet the specifications of the Touratech works racing team.

The characteristic shape of the 52 x 90 mm wide and 4 mm thick stainless steel claw profile is kind to your boots and offers the perfect combination of grip and self-cleaning. The rounded edges prevent damage to the boot soles, the open design allows clay and stones in the tread to fall through the foot pegs, while the boot profile has a sure hold on the peg. The slender design and outward chamfering allow for better ground clearance, which is a great asset when riding along deep ruts compared to regular enduro foot pegs or standard products.

The Touratech Works foot pegs have been specially strengthened at the mounting point, making them significantly less susceptible to impacts. The Works products are an optical highlight as well. Blasted stainless steel with a special laser inscription makes this product really stand out, as well as giving a visual indication of its noble origins in extreme enduro sport.

• - 52 mm wide and 4 mm thick stainless steel claw profile that is kind to your boots
• - Perfect combination of grip and self-cleaning
• - With a more slender design for better ground clearance
• - Significantly less susceptible to impacts
• - Strengthened mounting point
• - With a blasted surface and laser inscription for a superior finish
• - German ABE Type Approval