OEM Honda Hex Toolbox Wrench - CRF1000 / CRF1100

This is the tool that clips under your Rider Seat and enables you to open the toolbox

Acerbis Universal Skid Plate Link Guard

Tested under the toughest conditions, the Acerbis Skid Plate Link Guard is suitable for every Acerbis Skidplate and most of the OEM ones, and provides good protection for the suspension linkage on tough off-road tracks.

• Design studied for optimal protection of the suspension linkage.
• It allows the bike to easily slide over natural obstacles (whoops, rocks, trunks)
• Printed fin designed to protect the suspension link from impacts, mud and sand
• Flexible, lightweight plastic reduces vibration and surface damage to the suspension linkage.
• Its design ensures the best cover around the link, thus guaranteeing a clean ride
• Clamping screws included

Installation Instructions

• PDF Instruction Manual (English)

The Quad Lock® Universal Adaptor can be directly adhered to smartphones, cases and most flat metal or plastic surfaces, and is compatible with all Quad Lock® Mounts.

SECURE MOUNTING
The Patented Dual-Stage Lock makes it quick & easy to attach / detach your device, whilst giving you the peace of mind to know your device is securely locked.

SLIM PROFILE
At just 5mm thick, the Quad Lock® Universal Adaptor fits seamlessly onto the back of smartphones and cases.

Whats included:

• 1 x Quad Lock® Universal Adaptor
• Alcohol Prep Pad

Tech Specs:

• 3M™ VHB adhesive
• Slim profile (5mm thick)
• 48mm wide and 60mm tall
• Durable and tough composite construction
• Adheres to flat and slightly curved surfaces

Surface Guidelines:
The Quad Lock Universal Adaptor uses a 3M™ VHB 4952 Adhesive which will adhere to smooth, non-textured, non-porous surfaces such as:

• Plastics such as PC, ABS, PVC, Nylon, Acrylic
• Non-painted metals
• Un-coated glass

The adhesive will not bond to the following substrates:

• Rubber, TPU, TPE
• Leather
• Silicone
• Hydrophobic coated glass (Also known as anti-fingerprint glass, which is found on the back of most modern smartphones)
• Soft touch coating or paint
• Low surface energy plastics such as Polypropylene (PP), Polyethylene (PE), Acetal, HDPE
• Wood

We highly recommend using a case with the Universal Adaptor if your phone has a glass back.

Please ensure the substrate is thoroughly cleaned and dry before applying the Universal Adaptor.

The 3M™ VHB™ is a single use adhesive and is not reusable.

Denali Trigger Wizard - Universal High Beam Trigger for Ground Switched LED Headlights

The long-awaited Trigger Wizard is a simple wiring adapter that converts a ground-switched vehicle high beam wire to a traditional high beam wire that outputs 12 volts when you turn on your high beam. This adapter is required if you want to output a 12v high beam signal that will allow DENALI lights to change intensity with your factory high beam switch. 

To install the Trigger Wizard, simply connect the white and blue ends to the color-coded DENALI wiring harness trigger wires and then connect the black and white leads to the vehicle high beam and switched power wires respectively. 

What is Ground Switching? How do I know if I need this? 
Ground switching is a common configuration for LED vehicle headlight circuits and simply means that the switch is on the ground side of the headlight circuit as opposed to the power side of the circuit.  To tell what kind of switching your vehicle has simply use a voltmeter to measure the voltage on the headlight high beam wire as you toggle the high beam switch on/off. Traditional "power side" switched high beam circuits will show 0 volts when the high beam is off and 12+ volts when the high beam is turned on.

Ground switched high beam circuits do the exact opposite, where the wire will measure 12+ volts when the high beam is off and drop to below 1 volt when the high beam is turned on. Connecting the Trigger Wizard in-line between the DENALI wiring harness and the ground switched headlight circuit will flip the signal to properly activate the DENALI dimming features. This adapter is compatible will all DENALI DataDim driving light harnesses and the DialDim Lighting Controller. 

Are all LED headlights ground switched? 
No, so please follow the instructions above to determine if your vehicle has a ground switched high beam circuit. Here are a few example vehicles that do have ground switched high beam circuits (please see the instruction manual for details). We will be updating the manual to call out specific wires to connect to for specific vehicles as we gather the information. 

Instruction Manual Download

• PDF Instruction Manual (English)

Puig One Design - Side Tank Pad CRF1000 / CRF1100

With a minimalist Textured Design offering protection from scratches and impacts as well as improved grip and comfort.

Tank Protection products are designed to offer added protection from loose keys and zips whilst also offering individual styling.

Simple to install by means of self-adhesive backing, the Tank Protection will arrive safely packaged together with comprehensive fitting instructions and any additional fittings which may be required.

No modification to your motorcycle is necessary.

This is a handy tool for both the garage and riders with limited space on the trail.

Features:

• Length - 260mm
• Weight - 250g
• One end fits the 27mm rear axle nut, the other end is a tyre lever tool.
• Made of heat treated steel.

This is a handy tool for both the garage and riders with limited space on the trail.

Features:

• Length - 260mm
• Weight - 250g
• One end fits the 27mm rear axle nut, the other end is a tyre lever tool.
• Made of heat treated steel.

Zeta OffSet 26mm Bar Risers for 28mm (FatBar) handlebars

Offset your bars to get more room out of your bike! For taller riders you can still use your favourite bend of bars.

This bar clamp kit can offset the handlebar position forward or backward by 20mm and bar clamp kit that can raise the height by 26mm.

These OffSet Risers can be used on 28mm (1.1/8") Fatbars handlebars.

Features:

• The handle position is offset 20 mm in the front and back direction ( height 26 mm UP )
• Titanium colour
• Anodised for durability

Rear Brake Master Cylinder Rebuild Kit contains everything required to renew the rear master cylinder back to new.

Fits all models of the CRF1000 Africa Twin 2016-2019

• 1 x Snap Ring
• 1 x Snap Ring
• 1 x Spring
• 1 x O'Ring
• 1 x Boot
• 2 x Washer
• 1 x Cup Seal, Master Cylinder
• 1 x Cup Seal, Master Cylinder