To further enhance the Arrow Racing Full Exhaust Sytems you can now add a Carbon Fibre Heel Guard designed specifically for these link pipes.

Will only fit with the following full exhaust Systems:

• 72021PO - Arrow Racing Titanium Full System
• 72521PO - Arrow Racing Titanium 'No Cat' Full System - Homologated

This Catalytic Converter insert once fitted will meet the additional European Directive 97/24/EC ch.5 for homologation if your country requires it.

This will fit between the link pipe and the silencer and will only fit the following system:

• 72521PO - Arrow Racing Titanium 'No Cat' Full System - Homologated - CRF1000 (2016 > )

If you remove your headers you'll need new gaskets once you put them back on, or fit new aftermarket headers.

Supplied as a set of 2.

Fits:

• CRF1000 all models 2016 - 2019
• CRF1100 all models 2020>

Remus Stainless Steel Collectors - compatible with stock collectors or aftermarket silencers.

Suitable for:

• Honda Africa Twin CRF1000 - 2016
• Honda Africa Twin CRF1000 - 2017
• Honda Africa Twin CRF1000 - 2018
• Honda Africa Twin Adventure Sport - 2018

These chromed dome nuts hold the headers to the engine block, there are 4 in total.

The BoosterPlug is accepted worldwide, as a brilliant and affordable way to transform your Motorcycle from ”OK” to ”Absolutely Marvelous”. No need to spend a small Fortune on a Power Commander + endless Dyno hours to make your Bike run as it should have done from the Factory. The BoosterPlug is installed in less than 10 minutes. It plugs directly into your Bikes Wiring Harness using original Connectors – No cutting or splicing.

All modern motorcycles run relatively lean to meet current emissions legislation, which is exacerbated once you start adding aftermarket silencers and headers.

This is particularly evident with the CRF1000 Africa Twin - as even with the stock silencer, catalytic converter, and headers - the bike is set up to run lean.

So if you want to 'cure' your Africa Twin, or are running an aftermarket silencer and / or headers - the BoosterPlug is the most cost effective route to smooth running!

How it Works

This Information is in two versions - Right now you're on the "Compact Version".

If you want to know all the details, Click "Full Version" to read the original notes from the BoosterPlug inventor, they are extensive, but make interesting reading!

BoosterPlug Alternatives

The BoosterPlug concept seems really simple and our extensive "How it works" pages have inspired a few entrepreneurs to produce BoosterPlug copies.

To see an overview of the different "solutions" you'll find - and why you should stay with the original BoosterPlug, Click "BoosterPlug Alternatives"

A short presentation of the BoosterPlug

The BoosterPlug is accepted worldwide, as a brilliant and affordable way to cure the fueling problems that haunts all modern fuel injected Motorcycles.

No need to spend a small fortune on complicated multi adjustable electronic devices like the Power Commander + endless Dyno hours, to make your bike run as it should have from the factory.

The BoosterPlug is installed in less than 10 minutes. It plugs directly into your bike's wiring harness using original connectors – no cutting or splicing.

A true Plug and Play solution that will make your bike so much better:

• Improved and softer throttle response when rolling the throttle on-off.
• Enrichment of Air/Fuel mixture when you open the throttle will improve acceleration.
• Remove the Jerky low speed running that is typical for modern lean burn engines.
• Stronger and more reliable Idle.
• Reduced Puffing in your aftermarket exhaust on engine braking.

Too good to be true ?

A lot of Plug and Play devices will promise wonderful results, but unfortunately most of them are pure Snake Oil.

The BoosterPlug is the only Plug and Play module that is properly researched and developed - and performs as promised.

Sounds too good to be true ? - Read on to get a proper explanation - instead of slick sales talk.

More important - Feedback from our customers is extremely positive.

How does it work then ?

• If you can trick the Fuel Injection ECU to think the ambient air temperature is lower than the actual readings, the ECU will richen up the injected mixture by a certain amount.
• The correct enrichment will greatly improve the driveability of your bike - Basically, it is done by adding some extra resistance to the Air Intake Temperature Sensor, and the method have been tested thoroughly by many independent sources and it actually works. No magic involved.... 

• BUT, the Air Intake Temperature Sensor is not a linear output device, and if you just add a fixed serial resistor like in the picture above, the performance of your device will vary a lot with changes in ambient temperature.
• See the poor performance of the serial resistor in the chart below.

This is what other Plug and Play devices do, and that's actually why they fail: Typically, they are made to perform well in 20 degrees Celsius (Ambient air temperature), but this will make the bike run lean in 10 degrees, and rich in 30 degrees.

Most of the competitor device manufacturers don't bother to inform you about this, or they may not even know what their device does.....
Others will try to hide the problem with a lot of pseudo-technical talk and fancy buzz words.

The intelligent solution !

• The BoosterPlug is the only Plug and Play device that offers a stabilized enrichment of the mixture in different ambient temperatures. 
• To do this, the BoosterPlug is using an extra temperature sensor (and a few other components), that will work in cooperation with the original Air Intake Temperature Sensor.

• Sounds pretty easy, but the calculations to get it right are rather difficult. 
• See the actual performance of the BoosterPlug on the chart below. Note that the enrichment is the same regardless of ambient temperature.
• ​​You'll notice that the horizontal line drifts a little in really extreme temperatures, but it's really insignificant. 
• This is actually a very good result

FAQ

Please Click "FAQ" to go to the BoosterPlug FAQ page

Installation Instructions

• General BoosterPlug Installation instructions
• Additional CRF1000 Africa Twin specific Installation instructions

Designed for riders that want to get the most from their Akrapovič Slip-On Line–equipped Africa Twins.

Made from perfectly finished stainless steel, these optional headers are an easy-to-fit performance upgrade that will provide power gains right through the rev range, especially when fitted to the open version, where the increases are very impressive.

When combined with either Slip-On Line exhaust, the complete system delivers an enhanced sound that makes the beating heart of the Africa Twin sound superb.

RED POWER is something which can neither be seen nor touched; it’s a feeling which embodies the passion, performance and heat of competition drawn from over 20 years of motorcycle tuning and racing success.

And thanks to Scorpion’s technology transfer philosophy of sharing winning racing technologies, it’s a feeling which can be experienced by racers and road riders alike.

Hand Crafted Performance Exhausts

You only have to hold a Scorpion exhaust to appreciate the premium design and construction qualities, which translate into tangible gains in both performance and reliability. Hand crafted in England and widely regarded as the best bike exhaust on the market today, Scorpion has become one of the most popular upgrades a rider can make.

The real difference is the way a Scorpion feels. No other exhaust is created with our passion, expertise and experiences. Everything that we have put into developing the world’s best exhausts over the years is designed to be shared, felt and experienced by you, the rider.

Scorpion Serket Parallel Slip-on Silencer for Honda CRF1000 Africa Twin

Black Coated Ceramic Finish

RED POWER is something which can neither be seen nor touched; it’s a feeling which embodies the passion, performance and heat of competition drawn from over 20 years of motorcycle tuning and racing success.

And thanks to Scorpion’s technology transfer philosophy of sharing winning racing technologies, it’s a feeling which can be experienced by racers and road riders alike.

Hand Crafted Performance Exhausts

You only have to hold a Scorpion exhaust to appreciate the premium design and construction qualities, which translate into tangible gains in both performance and reliability. Hand crafted in England and widely regarded as the best bike exhaust on the market today, Scorpion has become one of the most popular upgrades a rider can make.

The real difference is the way a Scorpion feels. No other exhaust is created with our passion, expertise and experiences. Everything that we have put into developing the world’s best exhausts over the years is designed to be shared, felt and experienced by you, the rider.

Scorpion Serket Parallel Slip-on Silencer for Honda CRF1000 Africa Twin

Stainless Steel Finish