This 9 piece set of premium VESSEL brand Japanese screwdrivers is the perfect kit for maintaining, repairing or restoring your Japanese motorcycle, which has JIS (Japanese Industrial Standard) screws.

The set includes the following screwdrivers which cover every crosshead and slotted fastener on your bike:

• P3 x 150mm VESSEL Megadora 980 Series IMPACTA (JIS Crosshead)
• P2 x 100mm VESSEL Megadora 980 Series IMPACTA (JIS Crosshead)
• P1 x 75mm VESSEL Megadora 900 Series (JIS Crosshead)
• P2 x 100mm VESSEL Megadora 900 Series (JIS Crosshead)
• P3 x 150mm VESSEL Megadora 900 Series (JIS Crosshead)
• S5.5 x 75mm VESSEL Megadora 900 Series (Slotted)
• S8 x 150mm VESSEL Megadora 900 Series (Slotted)
• P2 x 25mm VESSEL Megadora 920 Series STUBBY (JIS Crosshead)
• S6 x 25mm VESSEL Megadora 920 Series STUBBY (Slotted)

VESSEL TOOLS 980 Series

VESSEL MEGADORA 'IMPACTA' SCREWDRIVER

The 980 Series "Impacta" is a revolutionary screwdriver that features a built-in impact driven screw removal function.

• Tang-Thru nut with cam rotation mechanism, which turns the driving tip counter-clockwise by 12° when the handle is hit with a hammer.
• Non-slip surface secures a firm grip even when your hands are covered with oil
• Fully hardened chrome vanadium steel shank
• High precision black tip point

The "Impacta" leverages impact acceleration to remove stuck screws.

Slip-Proof Handle: 

When used with oil covered hands, tightening torque is 26% higher with the "Impacta" than with other VESSEL screwdrivers.

VESSEL TOOLS 900 Series

VESSEL MEGADORA JAWSFIT SCREWDRIVER

The 900 Series is a standard screwdriver that features a JAWSFIT tip.

• JIS JAWSFIT tip that grips the screw and doesn’t cause CAM-OUT
• A knurled shank keeps hands from slipping in fast turning
• Fully hardened chrome vanadium steel shank
• High precision black tip point

VESSEL TOOLS 920 Series

VESSEL MEGADORA JAWSFIT STUBBY SCREWDRIVER

The 920 Series is a stubby screwdriver that features a JAWSFIT tip.

• 25mm long shank – ideal for working in cramped and restricted spaces
• JIS JAWSFIT tip that grips the screw and doesn’t cause CAM-OUT
• A knurled shank keeps hands from slipping in fast turning
• Fully hardened chrome vanadium steel shank
• High precision black tip point

Slip-Proof Handles: 

All MEGADORA models are equipped with the most advanced triple-moulded handle for comfort. The corners of the hexagonal cross-section are moulded with elastomer for a soft fit and high torque transmission.

WHY THESE ARE THE PERFECT DRIVERS FOR YOUR JAPANESE MOTORCYCLE.

Your Honda (or any Japanese manufactured motorcycle) uses JIS (Japanese Industry Standard) screws NOT Phillips screws, so use the correct Japanese manufactured tools to save damaging them.

Ever wondered why your Phillips screwdrivers keep rounding out on your screws?  Well basically, Japanese manufacturers use JIS screws (Japanese Industry Standard) and not Phillips screws that we are used to.

These JIS screwdrivers will fit perfectly into the screwhead and not slip or round out as they usually do if using a Phillips screwdriver.

JIS looks much like a Phillips screw, but is designed not to cam out and will, therefore, be damaged by a Phillips screwdriver if it is too tight. The driver has a 57 degree point with a flat tip, parallel wings.

JIS screwdrivers will work perfectly well with both JIS screws and Phillips screws, but a Phillips screwdriver will only be of optimum use on a Phillips screw and will likely damage a JIS screw.

Give your bike the treatment it deserves and use the proper tools to save the original fasteners.

The perfect screwdriver for your Honda screws.

Your Honda uses JIS (Japanese Industry Standard) screws NOT Phillips screws, so use the correct Japanese manufactured tools to save damaging them.

Ever wondered why your Phillips screwdrivers keep rounding out on your Honda screws?  Well basically Honda use JIS screws (Japanese Industry Standard) and not Phillips screws that we are used to.

These JIS screwdrivers will fit perfectly into the screwhead and not slip or round out as they usually do if using a Phillips screwdriver.

JIS looks much like a Phillips screw, but is designed not to cam out and will, therefore, be damaged by a Phillips screwdriver if it is too tight. The driver has a 57 degree point with a flat tip, parallel wings.

JIS screwdrivers will work perfectly well with both JIS screws and Phillips screws, but a Philips screwdriver will only be of optimum use on a Phillips screw and will likely damage a JIS screw.

Give your bike the treatment it deserves and use the proper tools to save the original fasteners.

VESSEL TOOLS 900 Series

VESSEL MEGADORA JAWSFIT SCREWDRIVER

The 900 Series is a standard screwdriver that features a JAWSFIT tip.

• JIS JAWSFIT tip that grips the screw and doesn’t cause CAM-OUT
• A knurled shank keeps hands from slipping in fast turning
• Fully hardened chrome vanadium steel shank
• High precision black tip point

Great for:

• Stripped Screws
• Rusted Screws
• Stuck Screws

Slip-Proof Handle: 
MEGADORA models are equipped with the most advanced triple-moulded handle for comfort. The corners of the hexagonal cross-section are moulded with elastomer for a soft fit and high torque transmission.

The kit contains 3 JIS Screwdrivers – P1, P2 and P3

Country of Origin - JAPAN

Manufacturers Warranty - Limited Lifetime

The perfect screwdriver for your Honda screws.

Your Honda uses JIS (Japanese Industry Standard) screws NOT Phillips screws, so use the correct Japanese manufactured tools to save damaging them.

Ever wondered why your Phillips screwdrivers keep rounding out on your Honda screws?  Well basically Honda use JIS screws (Japanese Industry Standard) and not Phillips screws that we are used to.

These JIS screwdrivers will fit perfectly into the screwhead and not slip or round out as they usually do if using a Phillips screwdriver.

JIS looks much like a Phillips screw, but is designed not to cam out and will, therefore, be damaged by a Phillips screwdriver if it is too tight. The driver has a 57 degree point with a flat tip, parallel wings.

JIS screwdrivers will work perfectly well with both JIS screws and Phillips screws, but a Philips screwdriver will only be of optimum use on a Phillips screw and will likely damage a JIS screw.

Give your bike the treatment it deserves and use the proper tools to save the original fasteners.

VESSEL TOOLS 920 Series

VESSEL MEGADORA JAWSFIT STUBBY SCREWDRIVER

The 920 Series is a stubby screwdriver that features a JAWSFIT tip.

• 25mm long shank – ideal for working in cramped and restricted spaces
• JIS JAWSFIT tip that grips the screw and doesn’t cause CAM-OUT
• A knurled shank keeps hands from slipping in fast turning
• Fully hardened chrome vanadium steel shank
• High precision black tip point

Great for:

• Stripped Screws
• Rusted Screws
• Stuck Screws

Slip-Proof Handle: 
MEGADORA models are equipped with the most advanced triple-moulded handle for comfort. The corners of the hexagonal cross-section are moulded with elastomer for a soft fit and high torque transmission.

The kit contains 2 JIS 920 Series Stubby Screwdrivers – P1 and P2

Country of Origin - JAPAN

Manufacturers Warranty - Limited Lifetime

The perfect screwdriver for your Honda screws.

Your Honda uses JIS screws NOT Phillips screws, so use the correct Japanese manufactured tool to save damaging them.

Ever wondered why your Phillips screwdrivers keep rounding out on your Honda screws?  Well basically Honda use JIS screws (Japanese Industry Standard) and not Phillips screws that we are used to.

These JIS screwdrivers will fit perfectly into the screwhead and not slip or round out as they usually do if using a Phillips screwdriver.

JIS looks much like a Phillips screw, but is designed not to cam out and will, therefore, be damaged by a Phillips screwdriver if it is too tight. The driver has a 57 degree point with a flat tip, parallel wings.

JIS screwdrivers will work perfectly well with both JIS screws and Phillips screws, but a Philips screwdriver will only be of optimum use on a Phillips screw and will likely damage a JIS screw.

Give your bike the treatment it deserves and use the proper tools to save the original fasteners.

VESSEL TOOLS 980 Series

VESSEL MEGADORA "IMPACTA" SCREWDRIVER

The 980 Series "Impacta" is a revolutionary screwdriver that features a built-in impact driven screw removal function.

• Tang-Thru nut with cam rotation mechanism
• Non-slip surface secures a firm grip even when your hands are covered with oil
• Fully hardened chrome vanadium steel shank
• High precision black tip point

Great for:

• Stripped Screws
• Rusted Screws
• Stuck Screws

The proprietary Tang-Thru nut incorporates a cam rotation mechanism, which turns the driving tip counter-clockwise by 12° when the handle is hit with a hammer.

The "Impacta" leverages impact acceleration to remove stuck screws.

Slip-Proof Handle: 
When used with oil covered hands, tightening torque is 26% higher with the "Impacta" than with other VESSEL screwdrivers.

The perfect screwdriver for your Honda screws.

Your Honda uses JIS screws NOT Phillips screws, so use the correct Japanese manufactured tool to save damaging them.

Ever wondered why your Phillips screwdrivers keep rounding out on your Honda screws?  Well basically Honda use JIS screws (Japanese Industry Standard) and not Phillips screws that we are used to.

These JIS screwdrivers will fit perfectly into the screwhead and not slip or round out as they usually do if using a Phillips screwdriver.

JIS looks much like a Phillips screw, but is designed not to cam out and will, therefore, be damaged by a Phillips screwdriver if it is too tight. The driver has a 57 degree point with a flat tip, parallel wings.

JIS screwdrivers will work perfectly well with both JIS screws and Phillips screws, but a Philips screwdriver will only be of optimum use on a Phillips screw and will likely damage a JIS screw.

Give your bike the treatment it deserves and use the proper tools to save the original fasteners.

VESSEL TOOLS 980 Series

VESSEL MEGADORA "IMPACTA" SCREWDRIVER

The 980 Series "Impacta" is a revolutionary screwdriver that features a built-in impact driven screw removal function.

• Tang-Thru nut with cam rotation mechanism
• Non-slip surface secures a firm grip even when your hands are covered with oil
• Fully hardened chrome vanadium steel shank
• High precision black tip point

Great for:

• Stripped Screws
• Rusted Screws
• Stuck Screws

The proprietary Tang-Thru nut incorporates a cam rotation mechanism, which turns the driving tip counter-clockwise by 12° when the handle is hit with a hammer.

The "Impacta" leverages impact acceleration to remove stuck screws.

Slip-Proof Handle:
When used with oil covered hands, tightening torque is 26% higher with the "Impacta" than with other VESSEL screwdrivers.

The perfect screwdriver for your Honda screws.

Your Honda uses JIS (Japanese Industry Standard) screws NOT Phillips screws, so use the correct Japanese manufactured tools to save damaging them.

Ever wondered why your Phillips screwdrivers keep rounding out on your Honda screws?  Well basically Honda use JIS screws (Japanese Industry Standard) and not Phillips screws that we are used to.

These JIS screwdrivers will fit perfectly into the screwhead and not slip or round out as they usually do if using a Phillips screwdriver.

JIS looks much like a Phillips screw, but is designed not to cam out and will, therefore, be damaged by a Phillips screwdriver if it is too tight. The driver has a 57 degree point with a flat tip, parallel wings.

JIS screwdrivers will work perfectly well with both JIS screws and Phillips screws, but a Philips screwdriver will only be of optimum use on a Phillips screw and will likely damage a JIS screw.

Give your bike the treatment it deserves and use the proper tools to save the original fasteners.

VESSEL TOOLS 900 Series

VESSEL MEGADORA JAWSFIT EXTRA LONG SCREWDRIVER

The 900 Series is an extra long screwdriver that features a JAWSFIT tip.

• 400mm long shank with central turning grip to minimise shaking due to the long shank and ensuring stability when tightening screws
• JIS JAWSFIT tip that grips the screw and doesn’t cause CAM-OUT
• Fully hardened chrome vanadium steel shank
• High precision black tip point

Great for:

• Stripped Screws
• Rusted Screws
• Stuck Screws

Slip-Proof Handle: 
MEGADORA models are equipped with the most advanced triple-moulded handle for comfort. The corners of the hexagonal cross-section are moulded with elastomer for a soft fit and high torque transmission.

The kit contains 2 JIS 900 Series Extra Long Screwdrivers – P2 and 6mm Slotted

Country of Origin - JAPAN

Manufacturers Warranty - Limited Lifetime

VESSEL TOOLS 900 Series

VESSEL MEGADORA SCREWDRIVER

The 900 Series is a standard screwdriver that features:

• A knurled shank keeps hands from slipping in fast turning
• Fully hardened chrome vanadium steel shank
• High precision black tip point

Great for:

• Stripped Screws
• Rusted Screws
• Stuck Screws

Slip-Proof Handle: 
MEGADORA models are equipped with the most advanced triple-moulded handle for comfort. The corners of the hexagonal cross-section are moulded with elastomer for a soft fit and high torque transmission.

The kit contains 3 Screwdrivers – S5.5, S8 and a STUBBY S6

Country of Origin - JAPAN

Manufacturers Warranty - Limited Lifetime

Essential to understanding how your bike works, and keeping it maintained - everything you ever wanted to know about your CRF1000

The manual covers the CRF1000A/D for the following regions:

• Australia
• Europe
• New Zealand
• Russia

OEM Honda Toolbox - CRF1000 Africa Twin - 2016/17 models only

OEM Honda - Oil Filter Wrench - 07HAAPJ-70101

This is the OEM Honda Oil Filter Wrench that enables you to remove the oil filter using either a open ended or ring spanner when access to the filter is limited.