Fitment for 2016 and 2017 CRF1000 only - WILL NOT FIT 2018/19 Models or the 2018/19 ADVENTURE SPORT

PLUG & PLAY EASY RIDING!

Rapid Bike EASY add-on electronic module is equipped with a microprocessor managing directly the lambda sensor signal to optimize the air/fuel ratio, improve the engine efficiency and eliminate the torque and power gaps typical of the low and medium rpm.

SIMPLY PLUG & PLAY!

Install your EASY module to the stock lambda sensor connector and check for operating status thanks to a led. Now you are ready for the module fine-tuning: this is a very simple procedure (using two easily accessible trimmers) without any need for additional software operations.
EASY add-on module can manage up to two lambda sensors, and it is designed especially for motorbikes with a standard configuration.

IMPROVE POWER DELIVERY WHILE KEEPING FUEL CONSUMPTION UNDER CONTROL!

INSTALL INSTRUCTIONS

AIR FUEL RATIO

Compared to the stock version (in blue color),RapidBike EASY (in red color) gains a higher speed keeping the same throttle opening, while placing the lambda sensor value in the ideal range between 13,5 – 14,5 AFR

OEM Honda Fuel Filter Assembly - CRF1000 (2016/17)

RapidBike Electronic Quick Shift Kit

Quick Shifter: Load sensor cell plugs into RapidBike EVO Exclusiv, EVO or RACING module and manages power cut to allow an up-shift or down-shift without using the clutch or closing the throttle (up-shift only for 2016/17 models)

The latest Rapid Bike SHIFT ASSIST module represents a big step forward in terms of a quick-shifting solution thanks to further technological development to perform up-shifting (traditional mode) as well as down-shifting operations (the so-called ‘blipper’, available only for bike models equipped with ‘ride by wire’). A new device reaching unmatched technical standards designed to deliver outstanding performance to track enthusiasts and further improve your riding experience.

New shifting device exchanging information with EVO and RACING add-on modules via CAN-bus allows it to perform auto-calibration of shifting kill-time in relation to the pressure applied in both directions, upper and lower gear, while matching the specific engine configuration. Allowing greater handlebar control and lower mechanical stress, granted by the unique ‘self-learning’ process.

• For 2016/2017 CRF1000 Up-Shift only (traditional mode)
• For 2018/2019 CRF1000 and CRF1000 Adventure Sport (Up and Down Shift 'blipper mode')

Requires the fitment of either a RapidBike EVO Exclusiv, EVO, or RACE module

Includes the correct additional Shift Rod required for the Africa Twin.

RAPID BIKE EVO EXCLUSIV MODULE:

The Rapid Bike Evo EXCLUSIV module enables you to take total control of fuelling operations, as it directly connects to all fuel injectors and also works in conjunction with the bike's standard O2 sensor to constantly manage the air/fuel ratio.

The only difference between the standard EVO module and this EVO EXCLUSIV version is that the EXCLUSIV version is strictly for the CRF1000 and cannot be re-programmed or installed on a different bike.

The Evo module’s most important benefit is the Auto-Adaptive feature, the ability to correct automatically the injection map by reading the signal of the stock O2 sensor (Lambda) while riding the bike. The injection map then becomes a dynamic value in order to match the changing weather conditions and driving style.

As the Evo module works with the O2 sensor, rather than eliminating it, the Evo module can adjust the entire fuel map including the closed loop area, something which some other fuelling modules cannot do.

Each Evo kit comes with the universal Evo module loaded with the correct map and settings for the CRF1000 Africa Twin and the bike specific wiring harness which features O.E. connectors for a simple plug and play installation. 

Innovative Auto-Adaptive feature – No need for a bespoke map or rolling road set up

The new and innovative auto-adaptive feature allows the Rapid Bike module to compare the air/fuel ratio target value with the signal reported by the lambda sensor. The result of this continuous comparison determines whether the fuel being injected needs to be increased or decreased, and ensure the engine always delivers its best performance.

This advantage is even more useful when making modifications to your CRF1000 Africa Twin such as the installation of a performance air filter or racing exhaust system requiring the injection map to be modified. Rapid bike is able to re-map, develop and implement these changes automatically whilst the rider is using the bike, there is no need for further intervention - it is true auto-adaptive technology. Other atmospheric factors such as temperature, pressure and humidity are also constantly being modulated and auto tuned.

Summary:

• Able to fully control fuelling in both closed and open loop through every RPM.
• Auto-adaptive feature dynamically changes values so no rolling road required
• Base Map supplied with module which will self learn to give optimum fuelling within 200km (approx)
• Plug & Play - Comes with bike specific loom with OEM connectors 
• Supplied with comprehensive Installation Instructions - specific for the CRF1000 Africa Twin
• Supports optional: Quickshifter (sold seperately) 

TOTAL INJECTION CONTROL

Rapid Bike EVO takes the best out of your bike!

WE TAKE YOU STRAIGHT WHERE OTHERS CAN'T REACH! - PLUG & PLAY, AUTO LEARNING

Take a close look at the map values: all other brands of add-on modules claim to modify the injection values, but in reality Rapid Bike is the only one allowing you to take action and reach consistent results with re-mapping the most critical section of the power delivery curve, that is the range of low and medium rpm where the lambda sensor is in full control of fueling parameters.

The graph’ blue area is defined by other brands as ‘closed loop area’ and as a matter of fact this section remains ‘off-limits’ for the rider since no real modifications of injection values are allowed. Rapid Bike technology puts you in full control of the game without any sort of limitations, offering you a powerful tool to be in charge of improving your bike performance in every riding conditions.

RAPID BIKE REVOLUTION FOR LAMBDA SENSOR MANAGEMENT

Adopting electronic technology for engine management requires a number of sensors to control the amount of fuel being injected and maintain a balanced carburetion. The amount and quality of intake air coming through the engine and mixed with fuel is affected by different factors such as temperature, pressure and humidity rate: this is the reason why bike performance is likely to change considerably with unpleasant consequences for the rider.

LAMBDA SENSOR: WHY IT WAS CONSIDERED AS A PROBLEM

Stock lambda sensor measures the quantity of oxygen in the exhaust gases while OEM ECU (Engine Control Unit) determines the air fuel ratio (air quantity in proportion to one unit of gasoline) to compare it with the value pre-set in its memory and modify the related injection timing.

Bike manufacturers adopted the lambda sensor installed on the exhaust system to monitor the carburetion values in order to comply with increasingly restrictive anti-pollution regulations. This system represents a real constraint for engine performance as it is forced to run with very lean fuel mixture while causing lack of throttle response and sudden power gaps. Here is why lambda sensor is often perceived as a major problem preventing the engine from exploiting its full potential.

RAPID BIKE PROVIDES THE SOLUTION!

Rapid Bike technology is very simple, yet quite innovative since it takes advantage of stock lambda sensor to improve engine efficiency while optimizing fuel consumption.

The goal is not to eliminate stock lambda sensor, rather to perform a dynamic modulation of this signal in such a way to result fully compatible with new injection values set by the add-on module.

This solution helps the whole system (OEM ECU + Rapid Bike) to be more reliable, and to prevent benefits of improved fueling from being perceived as a mistake requiring a further correction. As a matter of fact, Rapid Bike add-on module changes the amount of injected fuel (as it controls directly up to 8 injectors) while modulating stock lambda sensor signal in such a way that OEM ECU will not detect any difference in the air fuel ratio.

Such an innovative solution puts ‘out of the game’ poor and inefficient attempts to eliminate stock lambda sensor signal with devices no longer useful for an efficient management of latest fuel injection technology.

AUTO-ADAPTIVE FEATURE: OUR EXCLUSIVITY

Rapid Bike additional advantage is the ability to stabilize the best fueling values reached with using the add-on module, a system which is similar to the ECU working criteria. The new and innovative autoadaptive feature allows Rapid Bike module to compare the air/fuel ratio target value (set within the module’s map) with the signal reported by the stock lambda sensor. The result of this continuous comparison determines whether the fuel being injected needs to be increased or decreased, and secure the engine always delivers the best performance.

FREE YOUR MIND FROM THE OLD MYTH OF A SET INJECTION MAP

This advantage is even more useful when performing some consistent modifications to the bike (such as the installation of a free-flow air filter or a racing exhaust system) requiring the injection map to be modified – Rapid Bike module is able to develop and implement these changes automatically, while the rider is using the bike.

Rapid Bike overcomes the “old” idea of an injection map conceived as a value remaining fixed overtime. Our add-on modules offer the unique feature to develop an injection map and keep it constantly adjusted making the proper modifications without any need of external operations. Such a technology is so far advanced that a Rapid Bike module will complete the auto-remapping injection process within 200 km ride even in case of starting with a ‘zero’ value map.

RAPID BIKE EVO MODULE:

The Rapid Bike Evo module enables you to take total control of fuelling operations, as it directly connects to all fuel injectors and also works in conjunction with the bike's standard O2 sensor to constantly manage the air/fuel ratio.

The Evo module’s most important benefit is the Auto-Adaptive feature, the ability to correct automatically the injection map by reading the signal of the stock O2 sensor (Lambda) while riding the bike. The injection map then becomes a dynamic value in order to match the changing weather conditions and driving style.

As the Evo module works with the O2 sensor, rather than eliminating it, the Evo module can adjust the entire fuel map including the closed loop area, something which some other fuelling modules cannot do.

Each Evo kit comes with the universal Evo module loaded with the correct map and settings for the CRF1000 Africa Twin and the bike specific wiring harness which features O.E. connectors for a simple plug and play installation. 

Innovative Auto-Adaptive feature – No need for a bespoke map or rolling road set up

The new and innovative auto-adaptive feature allows the Rapid Bike module to compare the air/fuel ratio target value with the signal reported by the lambda sensor. The result of this continuous comparison determines whether the fuel being injected needs to be increased or decreased, and ensure the engine always delivers its best performance.

This advantage is even more useful when making modifications to your CRF1000 Africa Twin such as the installation of a performance air filter or racing exhaust system requiring the injection map to be modified. Rapid bike is able to re-map, develop and implement these changes automatically whilst the rider is using the bike, there is no need for further intervention - it is true auto-adaptive technology. Other atmospheric factors such as temperature, pressure and humidity are also constantly being modulated and auto tuned.

Summary:

• Able to fully control fuelling in both closed and open loop through every RPM.
• Auto-adaptive feature dynamically changes values so no rolling road required
• Base Map supplied with module which will self learn to give optimum fuelling within 200km (approx)
• Plug & Play - Comes with bike specific loom with OEM connectors 
• Supplied with comprehensive Installation Instructions - specific for the CRF1000 Africa Twin
• Supports optional: Quickshifter (sold seperately) 

TOTAL INJECTION CONTROL

Rapid Bike EVO takes the best out of your bike!

WE TAKE YOU STRAIGHT WHERE OTHERS CAN'T REACH! - PLUG & PLAY, AUTO LEARNING

Take a close look at the map values: all other brands of add-on modules claim to modify the injection values, but in reality Rapid Bike is the only one allowing you to take action and reach consistent results with re-mapping the most critical section of the power delivery curve, that is the range of low and medium rpm where the lambda sensor is in full control of fueling parameters.

The graph’ blue area is defined by other brands as ‘closed loop area’ and as a matter of fact this section remains ‘off-limits’ for the rider since no real modifications of injection values are allowed. Rapid Bike technology puts you in full control of the game without any sort of limitations, offering you a powerful tool to be in charge of improving your bike performance in every riding conditions.

RAPID BIKE REVOLUTION FOR LAMBDA SENSOR MANAGEMENT

Adopting electronic technology for engine management requires a number of sensors to control the amount of fuel being injected and maintain a balanced carburetion. The amount and quality of intake air coming through the engine and mixed with fuel is affected by different factors such as temperature, pressure and humidity rate: this is the reason why bike performance is likely to change considerably with unpleasant consequences for the rider.

LAMBDA SENSOR: WHY IT WAS CONSIDERED AS A PROBLEM

Stock lambda sensor measures the quantity of oxygen in the exhaust gases while OEM ECU (Engine Control Unit) determines the air fuel ratio (air quantity in proportion to one unit of gasoline) to compare it with the value pre-set in its memory and modify the related injection timing.

Bike manufacturers adopted the lambda sensor installed on the exhaust system to monitor the carburetion values in order to comply with increasingly restrictive anti-pollution regulations. This system represents a real constraint for engine performance as it is forced to run with very lean fuel mixture while causing lack of throttle response and sudden power gaps. Here is why lambda sensor is often perceived as a major problem preventing the engine from exploiting its full potential.

RAPID BIKE PROVIDES THE SOLUTION!

Rapid Bike technology is very simple, yet quite innovative since it takes advantage of stock lambda sensor to improve engine efficiency while optimizing fuel consumption.

The goal is not to eliminate stock lambda sensor, rather to perform a dynamic modulation of this signal in such a way to result fully compatible with new injection values set by the add-on module.

This solution helps the whole system (OEM ECU + Rapid Bike) to be more reliable, and to prevent benefits of improved fueling from being perceived as a mistake requiring a further correction. As a matter of fact, Rapid Bike add-on module changes the amount of injected fuel (as it controls directly up to 8 injectors) while modulating stock lambda sensor signal in such a way that OEM ECU will not detect any difference in the air fuel ratio.

Such an innovative solution puts ‘out of the game’ poor and inefficient attempts to eliminate stock lambda sensor signal with devices no longer useful for an efficient management of latest fuel injection technology.

AUTO-ADAPTIVE FEATURE: OUR EXCLUSIVITY

Rapid Bike additional advantage is the ability to stabilize the best fueling values reached with using the add-on module, a system which is similar to the ECU working criteria. The new and innovative autoadaptive feature allows Rapid Bike module to compare the air/fuel ratio target value (set within the module’s map) with the signal reported by the stock lambda sensor. The result of this continuous comparison determines whether the fuel being injected needs to be increased or decreased, and secure the engine always delivers the best performance.

FREE YOUR MIND FROM THE OLD MYTH OF A SET INJECTION MAP

This advantage is even more useful when performing some consistent modifications to the bike (such as the installation of a free-flow air filter or a racing exhaust system) requiring the injection map to be modified – Rapid Bike module is able to develop and implement these changes automatically, while the rider is using the bike.

Rapid Bike overcomes the “old” idea of an injection map conceived as a value remaining fixed overtime. Our add-on modules offer the unique feature to develop an injection map and keep it constantly adjusted making the proper modifications without any need of external operations. Such a technology is so far advanced that a Rapid Bike module will complete the auto-remapping injection process within 200 km ride even in case of starting with a ‘zero’ value map.

Overland Fuel jerry cans are the toughest jerry cans in the world. Manufactured in the Netherlands to the highest quality to withstand extreme use and time. That is why we will guarantee our cans for LIFE! (Terms and conditions apply)

Tough by design and manufactured using rotational molding technique in state-of-the-art facility, quality checked each and every one, which makes it technically superior.

As opposed to the 3-layer molded jerry cans which can peel by time, Overland Fuel uses a thicker one layer of TÜV approved and Patent material that makes it stronger, not prone to materiel peeling by time and able to withstand corrosive materials such as fuel in the harshest conditions.

The cans have specially designed leak proof neck and thread with cap lock and fuel resistant gasket allows seamless cap composition seal.

Please note that mounting kits are sold separately.

Made in the Netherlands

Specifications:

• Dimensions: 360 x 270 x 85mm (W x L x H)
• Volume: 4.5 Liters/ 1.19 American Gallons
• Weight (incl. spout) empty: 1.1 kg / 2.42 lbs
• Weight (incl. spout) filled 4.5L fuel: 4.4 kg / 9. 72 lbs (based on 1 Dutch Petrol liter = 0.737 kilogram)
• Spout: included Overland Fuel self-venting spout
• FKM Fuel resistant Rubber seal
• Colors: Red, Black
• Type of Fluids: Fuel Only – Benzine, Gasoline, Petrol, Diesel, Kerosene, Gasoil

Please vent your fuel tank regularly. 

BEFORE USE: Please wash thoroughly and allow to dry. As new plastic jerry cans can sometimes have debris from the production process present.

RAPID BIKE RACING EXCLUSIV MODULE:

The RACING module is the most advanced of the range a progression of the EVO module designed especially for race track use.

The only difference between the standard RACING module and this RACING EXCLUSIV version is that the EXCLUSIV version is strictly for the Honda CRF1000 and Adventure Sport and cannot be re-programmed or installed on a different bike.

WITH RACING MODULE YOU ALWAYS RIDE LIKE A PRO!

Starting from the latest standards set by Rapid Bike EVO, RACING module offers a revolutionary technology to manage the crankshaft position sensor signal and is designed to provide  additional and innovative features to reach unmatchable results within the competitive arena.

IGNITION MAP using the pick-up signal management for an accurate control of injection and spark advance timing

ENGINE BRAKE managed while decelerating to prevent rear wheel jumping and improve the bike’s stability while bending

PIT-LANE LIMITER can be activated manually with a handlebar switch to reduce and maintain constant speed in the pit lane area

DUAL SETTING to optimize the main engine parameters in real time and select the best possible setting between two different pre-set

Rapid Bike RACING module is able to manage additional and exclusive functions once it is installed with the new YOUTUNE controller, turning your bike into a more powerful and safer riding machine.

TRACTION CONTROL management is based on controlling the bike’s acceleration detected by engine’s crankshaft position sensor; when acceleration is such to compromise appropriate traction level, the system applies a sequence of injection cuts in order to bring it back within pre-set limits.
Rapid Bike Traction Control system is user-friendly and fully customizable in order to match different riding skills while providing additional safety and reliability in every driving conditions. 

LAUNCH CONTROL allows to release engine power only once top acceleration is reached, and at the same time to calibrate the effect and timing of traction control being applied during this specific operation.

RPM (SPEED) MANAGEMENT CONTROL  
Maintaining constant engine power delivery thanks to an effective system of  RPM limiter to keep speed under control and ride comfortably even in traffic jams, etc. 

Rapid Bike RACING add-on module performs additional features with installation of YOUTUNE controller:

• QS managing kill time of electronic quick-shifting 
• AFR modifying target of air/fuel ratio parameter for auto-remapping fuel adjustments. Displaying air/fuel ratio value and changing its target in real time (only with My Tuning Bike installed)  
• EB Fine tune modulation of engine braking effects 
• RPM Displaying a number of engine parameters, showing TC and EB operating, and activating RPM/Speed Control feature 

TOTAL CONTROL

Rapid Bike RACING takes the best out of your bike!

RAPID BIKE RACING MODULE:

The RACING module is the most advanced of the range a progression of the EVO module designed especially for race track use.

WITH RACING MODULE YOU ALWAYS RIDE LIKE A PRO!

Starting from the latest standards set by Rapid Bike EVO, RACING module offers a revolutionary technology to manage the crankshaft position sensor signal and is designed to provide  additional and innovative features to reach unmatchable results within the competitive arena.

IGNITION MAP using the pick-up signal management for an accurate control of injection and spark advance timing

ENGINE BRAKE managed while decelerating to prevent rear wheel jumping and improve the bike’s stability while bending

PIT-LANE LIMITER can be activated manually with a handlebar switch to reduce and maintain constant speed in the pit lane area

DUAL SETTING to optimize the main engine parameters in real time and select the best possible setting between two different pre-set

Rapid Bike RACING module is able to manage additional and exclusive functions once it is installed with the new YOUTUNE controller, turning your bike into a more powerful and safer riding machine.

TRACTION CONTROL management is based on controlling the bike’s acceleration detected by engine’s crankshaft position sensor; when acceleration is such to compromise appropriate traction level, the system applies a sequence of injection cuts in order to bring it back within pre-set limits.
Rapid Bike Traction Control system is user-friendly and fully customizable in order to match different riding skills while providing additional safety and reliability in every driving conditions. 

LAUNCH CONTROL allows to release engine power only once top acceleration is reached, and at the same time to calibrate the effect and timing of traction control being applied during this specific operation.

RPM (SPEED) MANAGEMENT CONTROL  
Maintaining constant engine power delivery thanks to an effective system of  RPM limiter to keep speed under control and ride comfortably even in traffic jams, etc. 

Rapid Bike RACING add-on module performs additional features with installation of YOUTUNE controller:

• QS managing kill time of electronic quick-shifting 
• AFR modifying target of air/fuel ratio parameter for auto-remapping fuel adjustments. Displaying air/fuel ratio value and changing its target in real time (only with My Tuning Bike installed)  
• EB Fine tune modulation of engine braking effects 
• RPM Displaying a number of engine parameters, showing TC and EB operating, and activating RPM/Speed Control feature 

TOTAL CONTROL

Rapid Bike RACING takes the best out of your bike!

The Touratech fuel can "Voyager" allows a significant increase in fuel range.

The ultra-robust container made of stable sheet steel is certified according to strict military standards as well as UN approval for the transport of dangerous goods.  This ensures that the Voyager canister can withstand extreme stress.

Another advantage of the ultra-robust design: the canister does not swell even in strong sunlight and therefore always fits perfectly into the holder.

Sealed with a high-quality passivated aluminum cap, the Voyager is leakproof – a fact that is as important from an environmental as it is from a safety perspective.  Just as solid as the patented basic construction of this canister made in EU are its fuel-resistant and rust-proof inner coating and the high-quality powder coating on the outside.

And we don't want to forget one thing: With its heavy-duty look and bright yellow finish, the Touratech Voyager fuel can gives every adventure bike a robust expedition look.

The canister can be attached to the Touratech panniers with the bracket especially developed for the accessory system of the ZEGA Evo cases, both comfortable and with a good centre of gravity.