The perfect screwdriver for your Honda screws.

Your Honda uses JIS screws NOT Phillips screws, so use the correct Japanese manufactured tool to save damaging them.

Ever wondered why your Phillips screwdrivers keep rounding out on your Honda screws?  Well basically Honda use JIS screws (Japanese Industry Standard) and not Phillips screws that we are used to.

These JIS screwdrivers will fit perfectly into the screwhead and not slip or round out as they usually do if using a Phillips screwdriver.

JIS looks much like a Phillips screw, but is designed not to cam out and will, therefore, be damaged by a Phillips screwdriver if it is too tight. The driver has a 57 degree point with a flat tip, parallel wings.

JIS screwdrivers will work perfectly well with both JIS screws and Phillips screws, but a Philips screwdriver will only be of optimum use on a Phillips screw and will likely damage a JIS screw.

Give your bike the treatment it deserves and use the proper tools to save the original fasteners.

VESSEL TOOLS 980 Series

VESSEL MEGADORA "IMPACTA" SCREWDRIVER

The 980 Series "Impacta" is a revolutionary screwdriver that features a built-in impact driven screw removal function.

• Tang-Thru nut with cam rotation mechanism
• Non-slip surface secures a firm grip even when your hands are covered with oil
• Fully hardened chrome vanadium steel shank
• High precision black tip point

Great for:

• Stripped Screws
• Rusted Screws
• Stuck Screws

The proprietary Tang-Thru nut incorporates a cam rotation mechanism, which turns the driving tip counter-clockwise by 12° when the handle is hit with a hammer.

The "Impacta" leverages impact acceleration to remove stuck screws.

Slip-Proof Handle:
When used with oil covered hands, tightening torque is 26% higher with the "Impacta" than with other VESSEL screwdrivers.

The perfect screwdriver for your Honda screws.

Your Honda uses JIS (Japanese Industry Standard) screws NOT Phillips screws, so use the correct Japanese manufactured tools to save damaging them.

Ever wondered why your Phillips screwdrivers keep rounding out on your Honda screws?  Well basically Honda use JIS screws (Japanese Industry Standard) and not Phillips screws that we are used to.

These JIS screwdrivers will fit perfectly into the screwhead and not slip or round out as they usually do if using a Phillips screwdriver.

JIS looks much like a Phillips screw, but is designed not to cam out and will, therefore, be damaged by a Phillips screwdriver if it is too tight. The driver has a 57 degree point with a flat tip, parallel wings.

JIS screwdrivers will work perfectly well with both JIS screws and Phillips screws, but a Philips screwdriver will only be of optimum use on a Phillips screw and will likely damage a JIS screw.

Give your bike the treatment it deserves and use the proper tools to save the original fasteners.

VESSEL TOOLS 900 Series

VESSEL MEGADORA JAWSFIT EXTRA LONG SCREWDRIVER

The 900 Series is an extra long screwdriver that features a JAWSFIT tip.

• 400mm long shank with central turning grip to minimise shaking due to the long shank and ensuring stability when tightening screws
• JIS JAWSFIT tip that grips the screw and doesn’t cause CAM-OUT
• Fully hardened chrome vanadium steel shank
• High precision black tip point

Great for:

• Stripped Screws
• Rusted Screws
• Stuck Screws

Slip-Proof Handle: 
MEGADORA models are equipped with the most advanced triple-moulded handle for comfort. The corners of the hexagonal cross-section are moulded with elastomer for a soft fit and high torque transmission.

The kit contains 2 JIS 900 Series Extra Long Screwdrivers – P2 and 6mm Slotted

Country of Origin - JAPAN

Manufacturers Warranty - Limited Lifetime

VESSEL TOOLS 900 Series

VESSEL MEGADORA SCREWDRIVER

The 900 Series is a standard screwdriver that features:

• A knurled shank keeps hands from slipping in fast turning
• Fully hardened chrome vanadium steel shank
• High precision black tip point

Great for:

• Stripped Screws
• Rusted Screws
• Stuck Screws

Slip-Proof Handle: 
MEGADORA models are equipped with the most advanced triple-moulded handle for comfort. The corners of the hexagonal cross-section are moulded with elastomer for a soft fit and high torque transmission.

The kit contains 3 Screwdrivers – S5.5, S8 and a STUBBY S6

Country of Origin - JAPAN

Manufacturers Warranty - Limited Lifetime

Essential to understanding how your bike works, and keeping it maintained - everything you ever wanted to know about your CRF1000

The manual covers the CRF1000A/D for the following regions:

• Australia
• Europe
• New Zealand
• Russia

Michelin 2mm Heavy Duty Reinforced Inner Tube suitable for 18" Rear Wheel.

Suitable for 140/80 and 150/70 18" rear Tyres.

Michelin 2mm Heavy Duty Reinforced Inner Tube suitable for 21" Front Wheel

This is a kit containing all required parts for you to add a powered accessory (Heated clothing, 12v Socket, Intercomm, etc) to your CRF1000 Africa Twin.

Kit contains:

• 1 x Male 6 way connector
• 6 x Male Terminals
• 1 x Female 6 way connector
• 6 x Female terminals
• 12 x seals

Using these OEM connectors you can plug straight into the accessory terminal underneath your seat without having to cut into the existing loom.

The accessory terminal wires:

• Green - Earth
• Red/White - Permanent Live 
• Red/Yellow - Ignition Switched Live

Suitable for wires 0.5mm - 1.25mm

• The Worlds Number 1 Best Selling Fenda Extenda will keep your bike clean and protected. 
• Fenda Extendas will protect your paint work, keep road debris from the radiator and will reduce your maintenance costs. 
• Our Fenda Extendas are made from P.S.P.E. material, a blend of polystyrene & polyethylene to give a good strength, long life and quality cosmetic finish.

An increasing number of customers have asked for an alternative to the standard mechanical fitment for the Extenda Fenda and in response to this demand we have developed the “Stick Fit” option.
The double sided bonding tape used is supplied by a European market leader, TESA, for use in trim assembly on automotive production lines worldwide.
Each Stick Fit Extenda Fenda is supplied with a pre-cut sheet of double sided bonding tape, model specific picture fitting instructions and an alcohol wipe

Scottoiler eSystem

As the most advanced electronic chain oiling system in the world, the Scottoiler eSystem v3.1 is designed for the biker who wants total control over their bike and it’s health – this including ultra-precise chain-oiling, of course. Connecting to your bike’s battery, the eSystem LED Display sits between your handlebars, allowing you to adjust oil flow-rates with ease.

The eSystem reservoir can be easily installed on the mainframe of the bike, with dispenser, cabling and oil provided to easily fit the dispenser above the sprocket face for optimal lubrication.

The Scottoiler eSystem v3.1 builds on the previously popular eSystem models with several software and hardware improvements for 2020! 

Self-calibration is now introduced, allowing you to get to what matters most quickly – riding hassle free! As well as this, further flow-rate settings have been introduced primarily at the lower end of the scale to allow for more precision particularly in wavering climates.

Furthermore, following popular demand, the eSystem v3.1 now retains all pre-established settings, even when disconnected from the battery! Leaving your bike over winter? Holiday planned? It’s now even quicker to get on the road and not have to worry about adjusting your settings – unless you want to.

• Increases chain and sprocket life on your bike.
• Easy and quick fit on to your bike.
• Significantly reduces any need for motorcycle chain maintenance.
• Sits easily between handlebars for quick and total control.
• Quicker start-up and now added flow-rate settings.
• Self-calibrating and now retains all pre-established settings.

The eSystem is our award-winning, premium motorcycle chain lubrication system and the flagship model from Scottoiler.  Voted MCN Product of the Year its fantastic technical features, ease of installation and on-the-road performance combine to create the most advanced motorcycle chain maintenance tool we have ever developed.

The eSystem is an electronically pumped motorcycle chain oiler requiring only a small power feed from the battery to operate. It can be installed to most bikes in under an hour by connecting the wiring loom to the battery; this plug and play connectivity means the eSystem is the easiest electronic motorcycle chain oiler ever developed.  Unlike some other products there is no complicated wiring or tapping into speedometers or switches.

Whats' In The Box

Installation

Suitable for a 18" Rear Wheel 

It's also a good idea to keep a spare on hand!