Combines wrench and bleeder valve into one convenient and compact tool

• Fits most 8 mm bleeder nipples (perfect for all XRV and CRF Africa Twins)
• Bleeds brake systems and hydraulic clutch systems
• Internal check valve for fast easy bleeding
• Anodized billet aluminum handle with chromoly steel body
• Compact size for tight spaces
• High quality internal seal
• Multi position handle

Flushing and bleeding your brake system at least once per year is essential for maintaining optimum performance from your brakes. In the past, bleeding or flushing brakes meant juggling wrenches, hoses, waste brake fluid bottles, clean up rags, etc. Now Motion Pro has introduced the new Mini Bleeder, a tool that incorporates many different bleeding tools in one compact package and makes this essential job a lot easier.

Your brakes are perhaps the most important component on your bike in terms of safety and control and regular brake fluid changes are essential to proper operation. However, bleeding brakes is a job that is not a whole lot of fun and, if you get brake fluid on your nice paint job, it can be very messy and potentially destructive. Nobody likes to make a mess, so sometimes this job get neglected, which is not a good thing at all because it can compromise the effectiveness of your brakes.
 
Aside from having enough pad material in the calipers, the brake fluid and it’s condition is the most important part of your brake system. Without going into a lot of technical details, heat and time will reduce the performance of the fluid. One of the most detrimental aspects is that most brake fluids attract water, which is quickly absorbed into the fluid, and has a much lower boiling point than the fluid itself. If enough water gets into the fluid, and you get it hot enough, the water will boil, introducing gas pockets into your hydraulic system, and resulting in your brake lever heading straight to the handlebar, a bad deal in any situation.
 
The Mini Bleeder Tool fits calipers with an 8 mm bleeder nipple. The interior rubber seal fits snugly around the nipple of the bleeder to prevent leakage of brake fluid. The built in floating wrench handle features 12 points on a 6 point hex on the tool body, making the handle micro adjustable for position on the body, allowing it to be used in super tight spaces. The short length of the handle reduces the chance of over torquing the bleeder. There is a one way check valve inside the body of the tool, greatly reducing fluid spillage when moving the tool from the bleed screw, and also allowing fast fluid flushing when desired.
 
Using the tool is very simple.

• The Mini bleeder hose should be routed to a brake fluid catch bottle, and then you simply connect the Mini Bleeder to the bleed screw, and start bleeding.
• You can perform the job in two ways, standard bleeding, where you build pressure in the closed system by stroking the brake lever, and then open the bleeder to allow fluid and air to flow out, and then closing the bleed screw before releasing the brake lever - This method is best for removing air from the system as a final process. 
• The alternate method is to use the Mini Bleeder as a flushing tool, simply opening the bleed screw and leaving it open while pumping the brake lever to flush the fluid through the system.
• The check valve in the Mini Bleeder body will keep the fluid flowing out only, and all you have to do is keep the reservoir filled until the fluid runs clean out of the Mini Bleeder. Then finish off the job with the standard bleeding method to remove any leftover air, and you are ready to go.
• As you remove the Mini Bleeder, there will be a tiny amount of fluid left in the bleeder, so keep a small rag handy, but it is a much cleaner job than just a hose and a wrench!

D.I.D’s Super Street Series ZVM X-Ring Chains were designed with increased power transfer from the engine to the ground, greater resistance to stretching under load and overall improved performance that meets the demands of current large displacement street bikes and the people who ride them. 

D.I.D's ZVM-X chains are the strongest high mileage chains - the 525ZVM-X chain is suitable up to a maximum engine size of 1300cc.

Traditionally, “Tensile Strength” has been used to indicate the overall strength of a chain. But Tensile Strength is only a laboratory static measurement of a chain’s “breaking point”. Rigidity, on the other hand, is the ability of a chain to withstand forces that occur in a rider’s real world experience. Increased rigidity means better power transfer from the engine to the ground and greater resistance to stretching under load. This translates into smooth handling and quicker response time.
To maximize performance, D.I.D’s race proven X-Ring® design delivers overall improved performance that meets the demands of today’s high-performance machines. The VX Series is the ultimate in performance and durability, and are a perfect match for your dual sport, sport bike or sport touring bike.

D.I.D's ZVM-X Chain uses patented X-ring seals. Like O-rings, X-rings function to seal in lubrication and keep dirt out.
Where the cross section of an O-ring is circular, the cross section of an X-ring is 'X' or cross shaped. This gives the seal additional contact points compared to the O ring, offering superior sealing and protection against dirt and grit getting stuck under the seal.
In addition, when under pressure an O-ring becomes squashed and causes friction. An X-ring, when under pressure, diverts this pressure by twisting instead, so an X-ring decreases friction between side plates and reduces power loss by 50% of any other type O-ring chain.

Half the Power Loss (Compared with Normal O-Ring)
D.I.D’s PATENTED X-Ring construction reduces friction by twisting between the side plates instead of being squashed. Normal O-Rings and other makers’ modified O-Rings have squashed points that increase friction. The twisting action of the X-Ring disperses the pressure and minimizes power loss.

D.I.D's X-rings have 40% greater Wear Resistance (Compared with Normal O-Ring)
The X-Ring’s four contact points greatly increase its sealing performance, keeping the dirt out and the lubrication in much better than any other O-Ring. X-Rings have the greatest wear resistance of any other type of O-Ring or Non-O-Ring chain, this means more resistance to stretching, bowing and warping and smoother handling. With the proper maintenance an X-ring chain will last longer than any O-ring or unsealed chain.

D.I.D’s Super Street Series ZVM X-Ring Chains were designed with increased power transfer from the engine to the ground, greater resistance to stretching under load and overall improved performance that meets the demands of current large displacement street bikes and the people who ride them. 

D.I.D's ZVM-X chains are the strongest high mileage chains - the 525ZVM-X chain is suitable up to a maximum engine size of 1300cc.

Traditionally, “Tensile Strength” has been used to indicate the overall strength of a chain. But Tensile Strength is only a laboratory static measurement of a chain’s “breaking point”. Rigidity, on the other hand, is the ability of a chain to withstand forces that occur in a rider’s real world experience. Increased rigidity means better power transfer from the engine to the ground and greater resistance to stretching under load. This translates into smooth handling and quicker response time.
To maximize performance, D.I.D’s race proven X-Ring® design delivers overall improved performance that meets the demands of today’s high-performance machines. The VX Series is the ultimate in performance and durability, and are a perfect match for your dual sport, sport bike or sport touring bike.

D.I.D's ZVM-X Chain uses patented X-ring seals. Like O-rings, X-rings function to seal in lubrication and keep dirt out.
Where the cross section of an O-ring is circular, the cross section of an X-ring is 'X' or cross shaped. This gives the seal additional contact points compared to the O ring, offering superior sealing and protection against dirt and grit getting stuck under the seal.
In addition, when under pressure an O-ring becomes squashed and causes friction. An X-ring, when under pressure, diverts this pressure by twisting instead, so an X-ring decreases friction between side plates and reduces power loss by 50% of any other type O-ring chain.

Half the Power Loss (Compared with Normal O-Ring)
D.I.D’s PATENTED X-Ring construction reduces friction by twisting between the side plates instead of being squashed. Normal O-Rings and other makers’ modified O-Rings have squashed points that increase friction. The twisting action of the X-Ring disperses the pressure and minimizes power loss.

D.I.D's X-rings have 40% greater Wear Resistance (Compared with Normal O-Ring)
The X-Ring’s four contact points greatly increase its sealing performance, keeping the dirt out and the lubrication in much better than any other O-Ring. X-Rings have the greatest wear resistance of any other type of O-Ring or Non-O-Ring chain, this means more resistance to stretching, bowing and warping and smoother handling. With the proper maintenance an X-ring chain will last longer than any O-ring or unsealed chain.

This Honda Centre Stand allows secure parking on a variety of ground surfaces and assists with maintenance.

Fits the 2018 onwards model only.

CTEK Bumper helps protect your CTEK charger from bumps and scratches when moving around the garage / workshop, and prevents scratching the paintwork if the charger is placed on your vehicle.

• Adds extra grip on slippery surfaces
• Made of durable silicon rubber material
• The CTEK Bumper fits snugly around the body of your CTEK charger
• Suitable for CTEK XS 0.8 Smart Charger.

The perfect place to keep all of your Africa Twin documents.

Size is 270mm wide X 180mm high with a velcro closer and business card holder on the closing flap.

• Accurately and quickly measures chain slack
• Two scales measure both chain slack and chain to swingarm clearance
• Setting chain slack properly dramatically improves chain life
• Light weight compact design fits easily in your tool box or road kit
• Works on most street and dirt bike applications up to 75mm chain slack
• Made from engineered nylon with aluminum measuring scale
• Anodized laser etched precision measuring scale
• Refer to your owner’s manual for proper chain slack and procedure
• Patent pending

OEM Honda Toolbag - CRF1000 (2016>)

OEM Honda Spanner 10x14 - CRF1000 (2016>)