This guard is manufactured in Britain from 2mm aluminium

Colour - Matt Silver.

This item fits the following models:
- Africa Twin RD04.
- Africa Twin RD07.
- AFrica Twin RD07A.

This guard can also be used on the standard link pipe in place of the OE Honda guard.

Designed and manufactured in Britain from Aluminium.

Colour - Matt Black

Supplied with all fittings required to mount to your bike

This item fits the following models:
- Africa Twin RD03
- Africa Twin RD04
- Africa Twin RD07
- Africa Twin RD07A

The front downtube on the Africa Twin is very prone to rusting as it is not covered by the bashplate. This guard will protect the downtube from much of the spray mud and stones thrown at it by the front wheel.

This guard is manufactured in Britain from 2mm aluminium.

Colour - Matt Black.

This item fits the following models:
- Africa Twin RD04.
- Africa Twin RD07.
- AFrica Twin RD07A.

New racing fairing for your Africa Twin.

Small double headlight model Rally will give a real racing touch to your bike.

All our fairings are finished with a visible interior and a gelcoat exterior which can be painted with a basic preparation.

The kit is complete with all fittings to mount to your bike.

The kit includes the following:

• Fibreglass one piece Rally Light Fairing
• Kevlar carbon Instrument panel
• Twin 100mm headlight
• Aluminium front subframe

This fairing does not come ready painted.

Boano Kevlar Carbon Rally Fairing for your Africa Twin. Much lighter and smaller than the original it will make your bike 20 years younger.

Please be aware that these kevlar carbon rally fairings are manufactured in Italy by Boano Moto s.r.l, who designed and created the original rally fairing.
We have seen fibreglass copies of these fairings, which are not moulded accurately, and have created issues when trying to fit to the Africa Twin.

Attention: This fairing cannot be fitted using a standard front subframe and headlights. You will need to make a new front subframe, and fit new smaller headlights or alternatively purchase the Africa Twin Fairing - Rally Light - Complete Kit., which contains everything you need to convert your Africa Twin

This fairing is supplied with a basic white gelcoat surface and will require painting.

Right side stand so that you can change your wheel at the roadside without the requirement of a centrestand or any different stand.

Supplied complete with bike specific bracket for mounting.

There are 2 versions - one for the RD03 and RD04 (1988 - 1992) and a different version for the RD07 and RD07A (1993 - 2003)

Please select your model from the drop down box below.

Front wind shield in kevlar carbon for the RD04 Africa Twin. It is higher than the original with a top spoiler to reduce windblast from your face.
 

ACF-50 is one of the best inventions for protecting your bike against road salt and grime. There are many aerosol cans available but we use the refillable pump action spray bottle when treating our bikes. This means you can get the ACF-50 where you want it much more accurately and you aren't wasting any spraying it all over the place. We prefer the ACF-50 as you don't need to keep reapplying it over the winter months.

What's included in the price:
- 1 quart bottle of ACF-50 (that's just under a litre).
- A refillable pump action spray bottle.
- Full usage instructions.

What is it? ACF-50 (Anti-Corrosion Formula) is an aerospace product that is now available to motorcyclists. Its aviation approval is MIL-SPEC 81309 Type II and III, which means it is approved for ferrous and non-ferrous metals, electrical systems and electronic components.

It is a VERY sophisticated type of ‘thin film’ water displacement product designed as a corrosion prevention and inhibiting compound for the harsh environmental conditions associated with aircraft operation with the added advantage that it will stop existing corrosion and is slow to deteriorate (it has a 12 to 18 month active life). It is also a very efficient penetrant without loosening structural attachments (a bit disastrous on an aircraft or motorcycle) and an excellent lubricant without having any high-pressure (HP) lubricants, wax, silicon or Teflon additives (which actually seal in moisture thereby aggravating and perpetuating the corrosion process). It is ‘pro-active’, neither passive nor waxy, is compatible with most plastics and rubbers is EXTREMELY ECONOMICAL IN USE - AND CONTAINS NO WATER.

Its uses on motorcycles are very similar to those on aircraft. Sprayed into the structure, joints and welds i.e. under the tank and seat, frame and steering head area (where the corrosion works away un-noticed), under panels and on hidden parts of the engine, radiators, engine cases, forks, calipers, wheels, anywhere on the bike really because it will work hard to prevent corrosion and structural degeneration. Where corrosion is already evident it will help inhibit further progress by insulating and electrically ‘switching off’ the corrosion cell. It will also penetrate around bolts, screws and hardware protecting them and preventing seizure.

Exposed engine and gearbox cases, swinging arms, forks and other exposed parts will benefit from ACF-50’s thin film technology by not corroding, will stay looking good and will clean up easily after a salt laden ride. It is also excellent on black plastic trim without leaving the residue of silicon.

It will protect electrical joints, plugs and components and prevent corrosion causing high resistance joints. This goes for PCB’s and electronics as well, such as computerised ignition and fuel control units and their multi pin plugs, while switches, controls and levers will all be lubricated as well as protected from corrosion. Multi pin plugs and connectors benefit from having ACF-50 applied directly to the contacts.

What will it actually do? It will, with regular applications; make maintenance easier and save you money, make the bike easier to clean, look better, help prevent surface/structural/electrical corrosion related failure thereby increasing reliability and it will increase the bike’s value. That’s what it will actually do!

How to use it! Being designed for aircraft it has a non-flammable propellant so when cold it sprays like shaving foam.

• Keep the tin warm and shake it really well before use to activate the propellant.
• Give the area the lightest coating/spray you can, enough so that when it creeps it will cover all.
• It really does creep, so caution with calipers or it will creep on to the pads.
• Also use a rag and spread it over the areas sprayed, the rag gets impregnated and then spreads it further.
• Under the tank and hidden areas it will last up to a year, (at least a year in plugs and switches).
• Exposed areas such as forks, the front of the engine, wheels and calipers; I just re-treat as necessary.
• You can tell if it is still active because any water will ‘bead’ on contact.

Corrosion Block Grease has the same corrosion protection properties as ACF-50 but in grease form. Can be used as an assembly grease (for example did you know that the copper in copper grease corrodes alloy?) so use this for such things as engine/transmission cases, caliper bolts, wheel bearings, wheel axle bolts (which always seem to corrode), battery terminals, side and centre stands, foot pegs, brake and clutch lever pivots, etc. etc.

Corrosion Block is an anti-corrosion compound developed exclusively to stop existing corrosion and prevent new. It is unique in that it is designed for use in electrics and electronics as well as metals and structures. This makes this product essential for your day-to-day routine maintenance and as long-term asset protection for your boat/equipment within the harsh marine environment.

What will it actually do? It will, with regular applications, make maintenance easier and save you money, easier to clean, look better, help prevent surface/structural/electrical corrosion related failure thereby increasing reliability and it will increase the bike’s value. It will significantly reduce your replacement, repair and labour expenses. That’s what it will actually do!

The Facts:
• KILLS existing corrosion
• PREVENTS new from forming
• Long lasting LUBRICANT
• APPROVED for ELECTRONICS
• Non-Toxic & Environmentally Friendly

Where to use it

Corrosion Block is simply applied to the structure, joints and welds, i.e. under hidden areas, where the corrosion works away un-noticed, under panels and on hidden parts of the engine, gear boxes, generators, switch panels and avionics, especially on outboard engines where it will work hard to prevent corrosion and structural degeneration. Where corrosion is already evident it will help inhibit further progress by insulating and electrically ‘switching off’ the corrosion cell. It will also penetrate around bolts, screws and hardware, protecting them from electrolytic corrosion and preventing seizure.

It will protect electrical joints, plugs and components and prevent corrosion causing high resistance joints. This goes for PCB’s and electronics as well, such as computerised ignition and fuel control units and their multi pin plugs, radio’s, radar and antenna’s, while switches, controls and levers will all be lubricated as well as protected from corrosion. It does not affect the working of electrical or electronic components however keep it off LCD’s. Multi pin plugs and connectors benefit from having Corrosion Block applied directly to the contacts. Corrosion Block has restored many a failed electronic/electrical component. It’s uses are unending, you will love it!

Wherever you are - riding to work or on the trip of a lifetime - the last thing you need is a hole in your oil cooler from a stray stone or passing debris.

The oil cooler on the Africa Twin is very exposed even with the OEM Honda plastic guard – so we’ve designed this oil cooler guard to protect the fragile fins from anything thrown up by the front wheel.

These are a great upgrade to your Africa Twin and an essential item if you have the Boano Racing conversion.

Lasercut from 2mm Aluminium and anodised silver – the oil cooler guard is a direct bolt on using the existing bolts and mounting points.