Fits all standard and Adventure Sports models of the CRF1000 and CRF1100 Africa Twin

The average person takes 0.5 to 1 full second to react to hazards. Traveling at 60 MPH, a rider will travel 25 to 50 feet before being able to properly react. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If your foot is not already situated correctly on the rear brake pedal, you are now potentially doubling reaction time and distance to make what could be a critical stop. This is why you see all motorcycle racers with 1 or 2 fingers on the front brake lever in photographs. AltRider has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the AltRider DualControl Brake System that enhance control and reaction time; a riser and an enlarger plate.

Riser

When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of your foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the AltRider enlarger and riser combined, there are now two levels in which to engage the rear brake, putting your foot in optimal position regardless of riding position.

Enlarger

The ever-changing terrain of off-road riding means your entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives your foot a greater surface area to work with, affording you more control of the rear brake. The enlarger plate is precision fit to each bike model ensuring long-term stability. Optional and replaceable grip pins are provided for further customization.

• Stainless steel bottom plate and hardware to endure the abrasions of off-road riding
• 100% designed and manufactured in the USA
• 25.4 mm (1 inch) riser height
• Optional and replaceable pins included for enhanced grip
• Enlarger and Riser available in black or silver
• Patent Pending
• Compatible with all Honda CRF1000/CRF1100 Africa Twin models

This official Honda Quick Shifter Kit enables you to change gear without using the clutch when shifting up and down during acceleration. 

Made of stainless steel and featuring By measuring the intensity of the shifting input, the quick shifter enables the rider to change gears without operating the clutch lever or shutting the throttle.

The system works for upshifting and downshifting, maximizing the riding experience. (For MT version only).

Only to be fitted to 2018 to 2021 models:

• CRF1000 Africa Twin (2018 - 2019)
• CRF1000 Adventure Sport (2018 - 2019)
• CRF1100 Africa Twin (2020 - 2021)
• CRF1100 Adventure Sport (2020 - 2021)

To initialise this kit you will need the (070MZ0010300) OEM Honda Short Service Connector

Install is very straightforward, and the initialisation is as simple as it gets - click on the links below:

• Installation Instructions
• Genuine Accessory Users Guide

​We have installed these on our own 2018 CRF1000 Adventure Sport and 2020 CRF1100 Adventure Sport - probably the best accessory we've fitted - and very addictive!!

This is the optional DCT Foot Shifter Kit for the DCT Engined Africa Twin CRF1100 and CRF1100 Adventure Sport.

This kit enables the rider to change gear in the traditional 1 down - 5 up format by using the left foot.

It works alongside the handlebar shift triggers giving the rider the choice of using either at any point. (For DCT Version only).

OEM Honda DCT Park Brake Lever - CRF1000/CRF1100 DCT 

This set of adapters allows you to mount your DoubleTake Mirror onto your Yamaha or KTM 790 and have them both set at the same height.

Set includes:

• 1 x Doubletake Yamaha/KTM 790 Adapter (Left To Right Hand Thread
• 1 x Doubletake Base Extension with 10mm x 1.25 male and female threads

OEM Honda Bar End Snap Ring - CRF1000 and CRF1100 (all models)

OEM Honda Handlebar Mount Rubber - CRF1000 / CRF1100 (all models)

OEM Honda Handguard Collar - XRV650/750/CRF1000/1100 Africa Twin

This part is used on all Africa Twins (see diagrams):

• XRV650 (1988-89)
• XRV750 (1990-2003)
• CRF1000 (2016-2019)
• CRF1100 (2020>)

The CamelADV 'bridged' handlebar risers for the CRF1000 and CRF1100 Africa Twin give you 25mm (1") of additional bar height and braces the handlebar clamps to minimise the twisting and flexing of the existing rubber mounted bar mounts to provide you with more precise control. 

The 25mm rise does not require any new brake, or control cables, or modifications to your Africa Twin to install.

These aluminum bar risers are precision-crafted, black anodised, and designed specifically for the handlebars of the CRF1000 and CRF1100 Africa Twin.

Many riders find that increasing bar height makes a noticeable improvement to their comfort. Raising the bar height results in a more upright position which can relieve neck and back strain. 

The CamelADV bar risers also enable a more comfortable and controlled standing position, which is ideal for off-road riding or just stretching the body on a long ride.

• Fits all CRF1000 Africa Twin and CRF1000 Africa Twin Adventure Sport
• Fits all CRF1000 Africa Twin and CRF1100 Africa Twin Adventure Sport

Supplied with four (4) longer M8 bolts for installation.

FINALLY! Awesome aftermarket handlebars for adventure bikes!

ProTaper is the patent originator and inventor of the oversized 1⅛" handlebar.

The EVO Adventure is the latest addition to ProTaper's EVO series. They have used the same proven technique to manufacture these bars as they did with their industry changing original 1⅛" oversized EVO handlebars. 

Specifically designed to give adventure/touring riders the increased comfort and control they desire. 

The EVO Adventure boasts a computer profiled 4mm wall design that is up to 25% lighter than other bars yet up to 45% stronger, which strikes a nice balance between hardness and flexibility. 

To prevent corrosion and increase their lifespan, the inside of the bars is treated with epoxy. 

Whatever you encounter on the road or trail, you bet these handlebars can take it!

ProTaper has also made room on these bars to accommodate accessories - with over 8" (20cm) of straight section in the control area, the hassles of mounting vital control and comfort components has now been eliminated. 

Features:

• 1⅛" tubing at the clamping area
• Made from 4mm, proprietary, 7000 series aluminum alloy for superior tensile and yield strength
• Best balance between fatigue life, impact strength, and impact absorbing flex
• High tech, stress relieved, shot peen and anodized finish for unmatched durability
• Independent lab tests show that the EVO handlebars outlast every other handlebar on the market in fatigue life
• Epoxy inner coating resists corrosion
• Chemically applied cut lines and alignment grid are scratch and peel resistant
• Bar end caps included to keep the elements out of the handlebar tubing
• Optional bends to accommodate wide range of model fitments
• Weighs only 1.55 to 1.70 pounds (720-780 grams) - depending on bend

Select from either Adventure or Adventure High - dimensions shown below.