HEX ezCAN II / Denali D3 Light Kit - Tenere 700

HEX ezCAN II YARI for the Yamaha Tenere 700 (all models and versions). 

YOUR BIKE. YOUR RULES. YOUR SAFETY.

The ezCAN plugs directly into your Tenere and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!

The power to manage your accessories safely.

The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.

Customise your bike and make it safer to ride.

KEY FEATURES.

• One device manages everything
• Integrated control
• Integrates additional safety features
• Does not void warranty
• Plugs directly into CAN-Bus (saves installation time and wiring complexity)
• Unobtrusive – fits perfectly under the seat
• Easy configuration of software via USB (Mac and Windows PC)
• Four individually electronically fused channels
• Waterproof and dust-proof

EASY INSTALLATION. (follow this Link for install guide)

• Download and install the configuration software 
• Install the ezCAN under the seat or side panel
• Route and connect the ezCAN battery cables
• Route and plug the ezCAN into the motorcycle CAN-bus
• Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)

This HEX ezCAN will work on the following bike models:

• Ténéré 700 (2019-2022)
• Ténéré 700 Rally Edition (2020-2022)
• Ténéré 700 World Raid (2022+)
• Ténéré 700 (2023+)
• Ténéré 700 Rally Edition (2023+)
• Ténéré 700 Extreme Edition (2023+)
• Ténéré 700 Explore Edition (2023+)

This product is supplied with two diagnostic port adapter cables allowing support for both Euro4 & Euro5 models of bike.

NOTE: If you are planning on installing auxiliary lights and / or a Denali SoundBomb Horn, please add the EXTENSION HARNESS KIT. 

WHAT'S IN THE BOX

• 1 x ezCAN Device
• 1 x Micro USB Cable
• 2 x Velcro Strips
• 2 x Blanking Plugs
• 4 x Cable Ties
• 4 x Two-wire stub connectors (Orange)
• 4 x Terminal wires (Orange)
• 4 x Blanking seals
• 1 x Green Horn Harness
• 1 x Blue 4-way High beam Harness (for bikes with colour TFT display)
• 1 x Blue 6-way High beam Harness (for bikes with monochrome display)
• 1 x Euro5 diagnostic adapter (2022+ Euro5 models)
• 1 x Euro4 diagnostic adapter (2019-2022 Euro4 models)

The HEX ezCAN Extension Harness Kit provides you with everything that you need to connect your auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.

The kit contains:

• 2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
• 1 x 0.5m 3-core extension cable (typically used for brake lights)
• 1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
• 3 x female MT-3 connector kit including pins and wire seals
• 5 x male MT-3 connector kit including pins and wire seals
• 5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
• 6 x 20mm adhesive lined Heat-shrink
• 2 x female spade connector terminals (6.3mm)
• 1m Sheathing

Denali D3 TriOptic™ Driving Lights

Our new D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing 36-watt street-legal driving light to hit the market. Our D3 driving light features our signature TriOptic™ beam system that includes a spot and hybrid driving lens with each light pod. Unlike previous TriOptic™ lights, the D3 hybrid driving beam is ECE and SAE compliant to deliver an impressive street-legal high beam in North America and European Union countries. But what if you're not concerned with street-legal precision and just want off-road outrageous? We got you covered too! The D3 spot lens was engineered for maximum beam distance measuring over 1900 feet at 1 lux (per pair). No other 36-watt light even comes close. The spot beam is so impressive it actually outperforms top-tier competitor's lights that are twice it's size. 

Our D3 is also available in an SAE & ECE certified fog beam for drivers seeking a true street-legal fog beam that is super wide and features a crisp horizontal "cut-off".

Features

• TriOptic™ Lens System (includes spot and hybrid lenses with each pod) 
• Best in class street-legal spot and hybrid beams (SAE/DOT & ECE certified) 
• High-Intensity Series Cree LEDs outputting 2100 lumens per pod 
• DataDim™ 3-wire smart-dimming technology
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments 
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels. 
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating 
• Low profile mounting bracket with stainless steel hardware included 
• Additional SAE/DOT & ECE certified hybrid driving lens included (spot lens installed) 
• Amber & Selective Yellow lenses available (sold separately) 

Beam Performance (pair) 

Spot Beam

• Beam Distance (at 1 lux): 1910 feet (582 meters) 
• Beam Width (at 1 lux): 100 feet (30 meters) 

Combo Beam (1 spot, 1 hybrid)

• Beam Distance (at 1 lux): 1520 feet (463 meters) 
• Beam Width (at 1 lux): 175 feet (53 meters)

Hybrid Beam

• Beam Distance (at 1 lux): 1050 feet (320 meters) 
• Beam Width (at 1 lux): 225 feet (69 meters) 

Specs (single pod)  

• Pod Size: 3.5" (90mm) Round x 2.62" (66mm) Deep
• LED: (3x) 11 Watt Cree XP-P LEDs 
• Power Draw: 36 Watts (3 Amps)
• Lumens: 2100
• DataDim™ Compatible: Yes 
• Operating Voltage: 9-32V DC 
• IP67 Waterproof & Submersible
• Hybrid Lens Certifications: SAE/DOT J581 & ECE R112
• Spot Lens Certifications: ECE R112 

What’s in the Box?

• (2x) D3 LED Light Pod (spot lens installed)
• (2x) D3 Hybrid Lens 
• (2x) Hinge Mounts with M8 Stainless Steel Hardware 
• (2x) Wiring Pigtail