ACF-50 is one of the best inventions for protecting your bike against road salt and grime. 

What is it? ACF-50 (Anti-Corrosion Formula) is an aerospace product that is now available to motorcyclists. Its aviation approval is MIL-SPEC 81309 Type II and III, which means it is approved for ferrous and non-ferrous metals, electrical systems and electronic components.

It is a VERY sophisticated type of ‘thin film’ water displacement product designed as a corrosion prevention and inhibiting compound for the harsh environmental conditions associated with aircraft operation with the added advantage that it will stop existing corrosion and is slow to deteriorate (it has a 12 to 18 month active life). It is also a very efficient penetrant without loosening structural attachments (a bit disastrous on an aircraft or motorcycle) and an excellent lubricant without having any high-pressure (HP) lubricants, wax, silicon or Teflon additives (which actually seal in moisture thereby aggravating and perpetuating the corrosion process). It is ‘pro-active’, neither passive nor waxy, is compatible with most plastics and rubbers is EXTREMELY ECONOMICAL IN USE - AND CONTAINS NO WATER.

Its uses on motorcycles are very similar to those on aircraft. Sprayed into the structure, joints and welds i.e. under the tank and seat, frame and steering head area (where the corrosion works away un-noticed), under panels and on hidden parts of the engine, radiators, engine cases, forks, calipers, wheels, anywhere on the bike really because it will work hard to prevent corrosion and structural degeneration. Where corrosion is already evident it will help inhibit further progress by insulating and electrically ‘switching off’ the corrosion cell. It will also penetrate around bolts, screws and hardware protecting them and preventing seizure.

Exposed engine and gearbox cases, swinging arms, forks and other exposed parts will benefit from ACF-50’s thin film technology by not corroding, will stay looking good and will clean up easily after a salt laden ride. It is also excellent on black plastic trim without leaving the residue of silicon.

It will protect electrical joints, plugs and components and prevent corrosion causing high resistance joints. This goes for PCB’s and electronics as well, such as computerised ignition and fuel control units and their multi pin plugs, while switches, controls and levers will all be lubricated as well as protected from corrosion. Multi pin plugs and connectors benefit from having ACF-50 applied directly to the contacts.

What will it actually do? It will, with regular applications; make maintenance easier and save you money, make the bike easier to clean, look better, help prevent surface/structural/electrical corrosion related failure thereby increasing reliability and it will increase the bike’s value. That’s what it will actually do!

How to use it! Being designed for aircraft it has a non-flammable propellant so when cold it sprays like shaving foam.

• Keep the tin warm and shake it really well before use to activate the propellant.
• Give the area the lightest coating/spray you can, enough so that when it creeps it will cover all.
• It really does creep, so caution with calipers or it will creep on to the pads.
• Also use a rag and spread it over the areas sprayed, the rag gets impregnated and then spreads it further.
• Under the tank and hidden areas it will last up to a year, (at least a year in plugs and switches).
• Exposed areas such as forks, the front of the engine, wheels and calipers; I just re-treat as necessary.
• You can tell if it is still active because any water will ‘bead’ on contact.

This is the perfect solution if you wear motocross or large armoured riding boots to enable you to change gear comfortably without struggling to get you boot under the gear lever.

• CNC machine milled aluminium
• Highly scratch resistant, due to hard anodised finish.
• Two-piece Gear Lever  fully adjustable unit allows infinitely variable adjustment
• Improvement in terms of ergonomics
• Spring lock ensures functionality, even after a fall over
• Manufactured in Germany

Included:

• Gear Lever
• All fittings required to attach to your bike
• Comprehensive fitting instructions

This fully adjustable windscreen Spoiler is a perfect solution to reducing turbulence against your helmet.

The clamp mechanism is machined from aluminium and anodised to ensure a lasting finish, and the spoiler is easily fixed to your windscreen with a rubber lined clamp for a secure mount.

The Spoiler is fully adjustable both in height and angle – can be set in seconds, and secured by  camlock.

Dimensions of Spoiler Screen:

Height – 125mm

Width – 260mm

This Air Dam can alleviate the buffeting some riders experience, with the flow of air coming up through the front forks in front of the fuel tank.

This kit contains everything needed to mount to your CRF1000 Africa Twin

• Black Textured ABS Air Dam (will not shatter)
• Black Stainless Steel Fixings (will not rust)
• Black Nylon Spacers (will not scratch your paintwork)

• Eliminate numbness and painful pressure points
• Double your ride time, Guaranteed
• Reduce moisture and body heat build up
• Handcrafted with Quality

To comply with North American off-road regulations, a set of spark arresters is available for the US market.

Designed for riders that want to get the most from their Akrapovič Slip-On Line–equipped Africa Twins.

Made from perfectly finished stainless steel, these optional headers are an easy-to-fit performance upgrade that will provide power gains right through the rev range, especially when fitted to the open version, where the increases are very impressive.

When combined with either Slip-On Line exhaust, the complete system delivers an enhanced sound that makes the beating heart of the Africa Twin sound superb.

This Slip-On Line exhaust is manufactured to withstand the harshest of conditions and has been developed from Akrapovič’s winning involvement in cross-country rallies. 

Offered as an alternative to the EC/ECE type-approved system for the Africa Twin, this superbly designed and finished 'Racing' exhaust has an even deeper sound that creates a stunning sound as the throttle opens and the revs rise. 

Manufactured with a unique combination of a hexagonal shape and a more classic rear endcap, this double-flow muffler is finished in durable titanium, has a removeable baffle, and is supplied with a robust carbon-fibre clamp to cope with the extreme conditions it is designed to face. 

Delivering performance increases throughout the entire rev range this exhaust makes the most of the Honda’s thumping twin-cylinder engine.

An even greater power increase can also be achieved with the addition of the optional stainless-steel headers to take the performance to higher levels.

The plug-and-play exhaust is simple to install without any need for remapping and comes with full instructions.

THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

Have an even more relaxed motorcycle ride! With the Alpine MotoSafe Pro earplugs you don’t have a ring or buzz in your ears after a long ride. They also prevent hearing damage and fatigue from wind noise. Did you know that at an average speed of 120 kilometres per hour, the volume is 98 decibels? This means that after just 7 minutes you already risk permanently damaging your hearing.

• Prevents hearing damage and fatigue from wind noise
• Traffic and communications system remain audible
• Two complete sets of earplugs, for average and heavy attenuation

Unique product specifications

• The only motorcycle earplugs with soft filters
• Very comfortable under the helmet
• Perfect fit thanks to AlpineThermoShape™ material
• Soft material, without silicone
• With free luxury pouch and Alpine Clean cleaning spray (5 ml)
• No feeling of being cut off
• Reusable

Description

• EARPLUGS FOR MOTORCYCLISTS
• Relaxed motorcycling

Have an even more relaxed motorcycle ride! With the Alpine MotoSafe Pro earplugs you don’t have a ring or buzz in your ears after a long ride. They also prevent hearing damage and fatigue from wind noise. Did you know that at an average speed of 120 kilometres per hour, the volume is 98 decibels? This means that after just 7 minutes you already risk permanently damaging your hearing. You will also become tired more easily, due to which you are less focused in traffic. In order to avoid this, Alpine has developed the perfect hearing protection for all types of motorcyclists.

Optimal attenuation Pro

• The Alpine MotoSafe filter earplugs attenuate harmful noises without giving a sense of isolation. Traffic, navigation, intercom and the motorcycle itself remain sufficiently audible.
• The Alpine MotoSafe Pro consists of two complete sets of motorcycle earplugs. One set of MotoSafe Tour earplugs with medium attenuation and one set of MotoSafe Race earplugs with heavy attenuation.
  • The MotoSafe Tour earplugs are ideal for example for tours, holidays and on the motorway.
  • The MotoSafe Race earplugs are ideal for on the motorway, the circuit or with an open helmet.
• Perfect for different uses and choosing the attenuation level yourself.

Unique material for the highest comfort
Alpine MotoSafe earplugs have a perfect fit. This is because they are made of durable and flexible AlpineThermoShape™ material. The warmth of the ear allows the soft material to mould to the ear canal. Alpine MotoSafe earplugs are also the only ones on the market with soft filters. As a result, they are also very comfortable under a helmet. AlpineThermoShape™ material contains no silicones. For this reason, the earplugs do not sweat, itch or irritate. You can wear them all day without any problems.

With luxury pouch
The Alpine MotoSafe earplugs include a luxury pouch. Simply add it to your keyring, so you always have your earplugs at hand.

Ride your motorcycle even more relaxed now! With Alpine MotoSafe earplugs you never have ringing in your ears after a long ride. You prevent hearing damage and feelings of fatigue from wind noise. Did you know that at a speed of 120 kilometres per hour on average, the volume is 98 decibels? This means that already after 7 minutes you risk permanent hearing damage.

• Prevents hearing damage and fatigue from wind noise
• Traffic and communications system remain audible
• Ideal for on the motorway, the circuit and with an open helmet

Unique product specifications

• The only motorcycle earplugs with soft filters 
• Very comfortable under the helmet 
• Perfect fit thanks to AlpineThermoShape™ material 
• Soft material, without silicone 
• With free handy storage bag 
• No feeling of being cut off 
• Reusable

Description

• EARPLUGS FOR MOTORCYCLISTS
• Relaxed motorcycling

Ride your motorcycle even more relaxed now!

With Alpine MotoSafe earplugs you never have ringing in your ears after a long ride. You prevent hearing damage and feelings of fatigue from wind noise. Did you know that at a speed of 120 kilometres per hour on average, the volume is 98 decibels? This means that already after 7 minutes you risk permanent hearing damage. In addition, you become tired faster due to the loud noise. This means that you ride with less concentration. For this reason, we have developed very comfortable ear protectors. For every type of motorcyclist.

Optimal attenuation RACE

• Alpine MotoSafe filter earplugs damp the harmful noise, without an enclosed feeling. Traffic, navigation, intercom and the motorcycle itself remain audible.
• Would you like to use the earplugs, for example, on the track or with an open helmet? Then choose the Alpine MotoSafe Race. These earplugs have a heavy attenuation. 
• The Alpine MotoSafe RACE earplugs are ideal for example for on the motorway, the circuit and with an open helmet.  

Unique material for the highest comfort
Alpine MotoSafe earplugs have a perfect fit. This is because they are made of durable and flexible AlpineThermoShape™ material. The warmth of the ear allows the soft material to mould to the ear canal. Alpine MotoSafe earplugs are also the only ones on the market with soft filters. As a result, they are also very comfortable under a helmet. AlpineThermoShape™ material contains no silicones. For this reason, the earplugs do not sweat, itch or irritate. You can wear them all day without any problems.

With handy storage bag
With your Alpine MotoSafe earplugs, you receive a handy storage bag. Simply add it to your keyring, so you always have your earplugs easily to hand.