This is a complete front fork replacement kit for your Honda CRF1000 Africa Twin

• NIX-technology
• Fully adjustable
• Golden TiNitride surface treatments on inner tubes

• Length: 912 mm
• Stroke: 252 mm
• Rate N/mm: 6.5 N/mm
• Position: front
• Mounted spring: 02421-65
• Spring series: 02421-xx
• Recommended oil: 01309-xx
• Oil level mm: 120mm

• Inverted Front Fork with 48mm inner tube diameter.

• This kit fits the Honda CRF1000 Adventure Sport

• Ohlins 30mm Cartridge Kit
• Ohlins Front Fork Springs - pair (please add comment to order showing your spring requirement)
  • 08435-70 - for rider weight of 75-95Kg
  • 08435-75 - for rider weight of 95-115Kg
• Ohlins Fork Oil- 1Ltr (01309-01)

• Position: front
• Spring series: 08435-series
• Recommended oil: 01309-01
• Oil level mm: 90mm
• Packaging unit: pair

Fitment

This kit fits the follwing models:

• Honda CRF1000 Africa Twin Adventure Sport (2018/19)

Ohlins STX 46 Adventure Shock Absorber HO 648 Shock Absorber for 2018/19 Honda CRF1000 Adventure Sport

Öhlins is proud to release an all new Adventure shock for the Honda CRF 1000L Africa Twin. Based on their trusted motocross technology, the new shock comes packed with ­advantages over the standard equipment.

Öhlins' test riders have put the Africa Twin through its paces out in the Swedish forests to ensure that the shock delivers on performance, safety and quality.  The ride is sublime and the Öhlins suspension eats up whatever rocks, bumps or roots come your way.  To ensure the shock delivers the highest level of performance for this type of bike, we have also extensively tested it on the streets. The shock gives increased grip and stability at high speeds while providing extensive comfort on your long touring rides.

Installation Instructions

Hyperpro Fork Spring Kit - lowers height by 25mm - CRF1000 Adventure Sport

The Hyperpro front fork springs are mainly progressive to give the best performance.

These fork springs when installed along with the Hyperpro Lower Rear Shock Spring will lower the bike by 25mm.

This will enable you to configure a better handling, more stable ride using the range of adjustability on the forks and shock absorber to adjust it to the correct suspension setting.

The progressive spring kit comes with:

• front fork springs
• fork oil
• comprehensive installation manual

THESE SPRINGS ARE NOT SUITABLE FOR THE STANDARD CRF1000 AAFRICA TWIN - PLEASE SEE PRODUCT #SP-HO10-SSA040

HyperPro - the suspension specialists from the Netherlands have designed a rising rate spring fitting for the OEM shock, which lowers the bike by 25mm.

This enables you to configurate a better handling, more stable ride and using the range of adjustability on the shock to adjust it to the correct suspension setting.

Available in either Purple or Black - please select your colour choice

THESE SPRINGS ARE NOT SUITABLE FOR THE STANDARD CRF1000 AFRICA TWIN - PLEASE SEE PRODUCT #SP-HO10-SSB040

• An easy way to keep your fork seals clean and grit free.
• Extract dirt and grit trapped between fork seal and tube.
• Will work on conventional and up-side down forks.

Fork Bushing Kit contains everything required to renow the fork bushes.

Fits all models of the CRF1000 Africa Twin 2016-2019 and CRF1100 Africa Twin 2020 onwards

• 2 x O'Ring
• 2 x Washer
• 2 x Snap Ring
• 2  Fork Bushing
• 2 x Fork Bushing

Dual Compound Fork Seal kit brings next level performance to the front fork suspension system.

Whats In The Kit

• 2 x SKF Dual Compound Oil Seals
• 2 x SKF Dual Compound Dust Seals

Fitment

• Honda CRF1000 Africa Twin and Adventure Sport (2016-2019)
• Honda CRF1100 Africa Twin and Adventure Sport (2020 onwards)

Introduction

The new fork seal kits feature Dual Compound Technology, Seals and wipers are vital protective components of the front suspension and greatly impact riding performance and trouble-free operation in the harshest environments.

Preface

Riding conditions, especially off road, are so varied and influenced by unpredictable environments that suspension and component (seals) manufacturers are traditionally forced to adopt a compromised approach while designing assemblies. This compromise often leads to decreased performance in the quest for durable operation.

The solution

SKF is making its contribution to improve reliability without sacrificing performance and riding feel with Dual Compound Fork Seal kits, which represent a great leap in design and manufacturing technology. 

• Improve contamination exclusion
• Optimized friction and stick-slip

SKF has produced a revolutionary new fork seal kit design with two newly formulated proprietary NBR compounds optimized for specific sealing functions.

The co-molded manufacturing technology allows utilization of these compounds and features completely re-designed lips on the dirt scraper and the oil seal to enhance followability on the shaft and better exclusion for greatly improved protection against external contaminants ①

The new open wound garter spring ② allows mud to flow through the spiral for a stable radial load on the lip to optimize contact pattern to the shaft.

The new metal stamping for both dirt scraper and oil seal provide proper support to the sealing lips for optimal functionality ③.

The proprietary “super low friction” NBR compound is enhanced by the specifically designed lip ④ of the oil seal and has been developed to further reduce the friction and stick-slip under all operating conditions.

Testing

The Dual Compound Fork Seal significantly outperforms the competition and provides further protection improvement versus SKF’s own current product offering. It has better protection against external contamination than other seals. (Water Ingress) Friction and stick-slip remain the benchmark of the fork application (Friction Comparison).

Summary

Thanks to the commitment of the SKF team, the Dual Compound fork seal kit is ground- breaking technology for design and manufacturing of seals that will significantly improve protection of the internal fork mechanism while maintaining low friction and stick-slip properties for an enjoyable riding experience and reliable operation.

Koubalink Lowering Link - CRF1000 / CRF1100 Africa Twin (all models) - 

The Original Motorcycle lowering Link - Drops Bike by 1 inch (25mm) - Replaces the stock OEM Honda link PN: 52475-MJP-G50

Fitment

• CRF1000 Africa Twin (2016-2019)
• CRF1000 Adventure Sport (2018-2019)
• CRF1100 Africa Twin (2020 onwards)
• CRF1100 Adventure Sport (2020 onwards)

Install Instructions

For 25 years, KoubaLinks has been the leader in lowering the seat height for trail riders around the world.

With over 4,000 applications, KoubaLinks has a lowering suspension link for everything from Aprilia to Yamaha, used by trail riders, motocross racers, and adventure tourers.

CNC machined out of 6061 aluminium, each lowering link comes complete with bearings and seals, and a grease zerk for easy maintenance.

Increase plushness, improve cornering, and gain confidence by having a lower centre of gravity.

KoubaLinks.com: built in Boise, ridden and raced everywhere.

• Complete with bearings, seals and grease fitting
• Available for over 4000 applications
• CNC Machined out of 6061 aluminium 

NOTE: Lowering amounts indicate REAR lowering, NOT overall bike height.

AltRider Variable Height Suspension Linkage for Honda CRF1000L and CRF1100L Africa Twin/ ADV Sports

With AltRider’s Variable Height Suspension Lowering Linkage customize your suspension to either lower or rasie your seat height. Lower your seat 12mm (0.4 in), 25mm (1 in), or raise your seat 6mm (0.24 in), or 19mm (0.75 in) from factory height.

Lower your suspension to make your dirt bike easier and more comfortable to put both feet down during stops on uneven terrain. If you have a shorter inseam, increase your comfort and confidence knowing you will be able to plant both feet on the ground. Our variable height lowering linkage is an excellent way to improve your skill level, set your height to where you’re comfortable and raise the height as your skill level improves!

• Four adjustable heights with provided inserts, 2 lowered heights, and 2 raised heights
• Lower your seat 12mm (0.4 in), 25mm (1 in) from factory
• Raise your seat 6mm (0.24 in), or 19mm (0.75 in) from factory
• Seat height adjustments are etched on the inserts
• Built in UHMW plastic linkage guard to prevent damage
• Precision CNC machined aircraft grade billet aluminum with anodized finish
• Needle bearings with integrated dust seals to provide OEM level ingress protection
• Weighs only 3.2 oz (91 grams) more than OEM linkage

Robust 6mm thick UHMW integrated linkage guard to protect the lower shock mount (removable with 3x M6 flush mounted fasteners). The only offering with a built-in plastic guard, doesn’t transfer impact like other rigid guards and won’t snag like aluminum will.

Adjustments are made with inserts that have the seat height setting laser etched on them. Each insert has 2 different holes and can rotated two different ways for a total four different ride heights. The inserts have the seat height adjustments etched on the inserts.

OEM grade needle bearings with integrated dust seals to provide OEM level ingress protection

Pair the Variable Suspension Links with the innovative AltRider Adjustable Aluminum Side Stand for the Africa Twin and always have a reliable and sturdy kick stand, no matter how your suspension height is set.

Compatible with Honda CRF1000L and CRF1100L Africa Twin standard and Adventure Sports models

Note: Lowering or raising the rear of your bike will change the geometry and handling of the bike. Please make necessary adjustments to your fork height in order to match the stock geometry or your riding preference.

ADJUSTABLE SUSPENSION LINKAGE FEATURES

INSTALLATION FOR ADJUSTABLE SUSPENSION LINKAGE