Oxford Heated Grips - Premium ADVENTURE.

The grips have ergonomically engineered surface structures to optimise riding performance.

Thicker rubber in areas of maximum wear, rhombus tread pattern for vibration absorption, 5² block siped tread patterns for high levels of grip and fee, diamond tread pattern where maximum grip is required and waffle matrix for finger grip.

• 5 heat settings (30%, 40%, 50%, 75% and 100%) with LED lights to indicate heat setting)
• Battery saving mode (turns grips off if you forget or if battery voltage falls too low)
• Switch technology (raised and tactile silicone buttons for use with gloved hands)
• Rainproof switch
• Draws under 4A
• Length: 132mm (can be trimmed to 122mm if required)
• Can be fitted in conjunction with Barkbusters Handguards

Includes:

• 2 x Hotgrips
• 1 x intelligent heat control
• 1 x metal bracket and fittings for mounting the heat controller
• 1 x wiring loom, cable ties and grip glue
• 1 x instruction booklet and warranty form 

• Volt meter - Display range : DC 7.0 ~ 19.9 V
• Display unit - 0.1 V
• Voltage warning - Unit flashes below 11.5 volts.
• Effective voltage - DC12V
• Meter standard - JIS D 0203 S2
• Meter size - ø 40 X 11mm
• Meter weight - 24g

Compact digital Temperature Gauge with a display range of 0°C ~ 120°C

The small and compact size of the Coin Volt meter, 40mm diameter and 11mm deep, makes it very easy to install at almost any location on the bike. 

The blue or red illuminated digits make this meter very attractive and easy to read in bright daylight and at night.

It’s equipped with a warning function to help you monitor the information - when the temperature is over 120°C, the meter will flash to warn you.

Completely black when not alight.

Simple connection, supplied with self adhesive pad.

• Display Range: 0°C ~ 120°C
• Display unit: 1°C
• Temperature Warning: When the temperature is over 120°C, the meter will flash to warn you.
• Effective voltage: DC12V
• Meter Standard: JIS D 0203 S2
• Meter size (W x L x H): ø 40 X 11mm
• Meter weight: 30g
• Temperature sensor type: M10 x 1/8 npt

• Display range: DC 8.0 ~ 18.0 V
• Display unit: 0.1 V
• Voltage warning: When the voltage is lower than 11.5V, the meter will flash to warn you.
• Effective voltage: DC12V
• Meter standard: JIS D 0203 S2
• Meter size: 56.4 X 27 X 11mm
• Meter weight: 20g

The X-Connect Eyelet Terminal allows a battery charger to connect quickly to any battery. Replace a lost connector or permanently mount one on your motorcycle, ATV, snowmobile, personal watercraft, lawn mower and more for easy charging.

• Permanently mount a battery connection to any battery.
• Lie-flat design for seamless installations with M6 (1/4-inch) hole size.
• Built-in fuse protection for increased safety.
• More ways to charge with plug-n-play accessory changes.
• Rugged, watertight connector for extreme environments.

X-Connect 12V Male Plug allows a battery charger to charge and maintain your vehicle's battery through 12V auxiliary plug/cigarette lighter. A built-in power LED indicator illuminates when the vehicle's 12-volt is active.

This has the DUAL SIZE auxilliary plug adapter allowing you to use on pretty much any vehicles auxilliary power socket - do not confuse this one with the cheaper single size version.

The GC003 12V Plug Connector works with NOCO Genius battery chargers and allows the battery chargers to charge and maintain your vehicle's battery by simply plugging into the 12V auxiliary plug/cigarette lighter. 
The Quick Connect cable makes connecting the 12V Plug Connector simple. Ideal for motorcycles where the battery compartment is difficult to access.

• For Use with G1100EU, G3500EU, GENIUS1, GENIUS2, GENIUS5, and GENIUS10 Noco Genius chargers
• Ergonomically Designed to Make Battery Connecting and Disconnecting Effortless
• Built-In Fuse Protection to Protect Against Potentially Dangerous Short Circuits
• Plug-N-Play Connector for Easy Accessory Changes
• Charge and maintain your battery from the 12V auxiliary plug/cigarette lighter
• LED indicator displays when the 12-volt auxiliary port is active.
• More ways to charge with plug-n-play accessory changes.
• Rugged, watertight connector for extreme environments.
• For Use with NOCO Genius Models Only

Producing a massive 113 decibels of sound, the SoundBomb is over twice as loud as your standard motorcycle horn!

The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed.

At 113 decibels, the distinct low-tone sound from the DENALI SoundBomb Mini is over twice as loud as a typical 100 decibel disc horn.

Designed to be a direct Plug & Play upgrade from your factory horn, requiring no additional relay or wiring harness.

When stock isn't quite enough, be heard with the SoundBomb Mini.

Compatible with all CANbus electrical systems.

Fully illustrated installation instructions

These are a direct replacement fit with your standard feeble horn on your Africa Twin.

Specifications:

• Sound Output: 113 dB at 3 feet
• Current Draw: 5 Amp
• Dimensions: 3.25"(82mm) x 3.4"(86mm) x 2.5"(63mm)
• Stylish All Black Design CANbus compatible

RapidBike Electronic Quick Shift Kit

Quick Shifter: Load sensor cell plugs into RapidBike EVO Exclusiv, EVO or RACING module and manages power cut to allow an up-shift or down-shift without using the clutch or closing the throttle (up-shift only for 2016/17 models)

The latest Rapid Bike SHIFT ASSIST module represents a big step forward in terms of a quick-shifting solution thanks to further technological development to perform up-shifting (traditional mode) as well as down-shifting operations (the so-called ‘blipper’, available only for bike models equipped with ‘ride by wire’). A new device reaching unmatched technical standards designed to deliver outstanding performance to track enthusiasts and further improve your riding experience.

New shifting device exchanging information with EVO and RACING add-on modules via CAN-bus allows it to perform auto-calibration of shifting kill-time in relation to the pressure applied in both directions, upper and lower gear, while matching the specific engine configuration. Allowing greater handlebar control and lower mechanical stress, granted by the unique ‘self-learning’ process.

• For 2016/2017 CRF1000 Up-Shift only (traditional mode)
• For 2018/2019 CRF1000 and CRF1000 Adventure Sport (Up and Down Shift 'blipper mode')

Requires the fitment of either a RapidBike EVO Exclusiv, EVO, or RACE module

Includes the correct additional Shift Rod required for the Africa Twin.

Replacement OEM Honda Transponder Key Blank for the 2018> models.

Once you have had this spare key cut to match your original, it will need to be HISS registered at your dealer, or by a competent mechanic.