To make your Tenere 700 machine sound even more exciting, the Akrapovič slip-on gives a throaty-rich exhaust note.

• Tenere 700 Slip-on EC/ECE EUR5 type approved
• Stainless steel inlet titanium outer sleeve
• Carbon fibre heat shield
• Twin baffle with carbon end cap
• Laser engraved TENERE logo

To make your Tenere 700 machine sound even more exciting, the Akrapovič slip-on gives a throaty-rich exhaust note.

• Tenere 700 Slip-on EC/ECE EUR5 type approved
• Stainless steel inlet titanium outer sleeve
• Carbon fibre heat shield
• Twin baffle with carbon end cap
• Laser engraved TENERE logo

HP Corse - SP-1 Short Titan High Silencer - Tenere 700

 
Often requested, often tried, but now avaiable in a perfect version. A special Tenere 700 silencer with silencer mounted in a high version. The linkage pipe and the silencer is mounted in a high position on the right hand side of the bike.
No damaged swing arms anymore, no problems in hard and tricky off-road use.Our recommendation when it comes to real off-road use with the Tenere.
Of course also for street use. With it's Euro 4 and Euro 5 homologation, this silencer is street legal as well.
 
The SP-1 Titan silencer combines the Italian passion for design and the years of experience of HP Corse in silencer construction.
This special SP-1 was developed especially for the Tenere 700. Developed at the HP Corse R&D center in Bologna / Italy, manufactured with a special hydroforming technology and made for the big and small adventurers around the world.
 
Manufactured from the highest quality materials, the silencer withstands the most demanding conditions on the gravel roads of the world. Developed for many thousands of kilometres - on- and off-road.
The silencer from HPCorse combines excellent performance with a perfect finish and first-class sound. Dyno bench tested, on road and on the most demanding tracks, the HP Corse exhaust is light, reliable, robust and guarantees an increase in performance compared to the original exhaust, especially at low and medium speeds. The muffler has a nice deep and rich sound and perfectly completes the beautiful, but also special design of the Tenere 700.
 
The exhaust system is Euro 4 and Euro 5 homologated. Upgraded with a carbon heat shield and the typical Rally style end cap, this silencer will give your Tenere the special look.
Nice, deep and powerful sound - much better that stock, but not too loud. Better power output in torque and hp as well.
Available as a street legal version with Euro 4/5 homologation.
 
Tested on the bench, on the hardest roads and gravel roads, SP-1 Titan guarantees reliability and superior performance compared to the original exhaust, generating a peak of power especially at low and medium rpm, as well as extraordinary torque.
 
Euro 4 and Euro 5 approved
 
Specifications:

• High up silencer kit
• Titanium / stainless steel version with satin finish
• Silencer made of high quality, heat resistant titanium alloys and premium stainless steel
• Carbon made heat shield
• Exciting sound & design
• SKU: YAT700SP1300HT-AB
• Weight reduction thanks to usage of quality materials
• Euro 4 and Euro 5 homologation
• Tail tidy kit necessary for mounting:
  • OEM Yamaha Tail Tidy
  • CamelADV Tail Tidy
  • R&G Racing Tail Tidy

 
Fits all:
Yamaha Tenere 700 2019- onawrds (Euro 4  + Euro 5 models)

HP Corse - SP-1 Short Titan High BLACK Silencer - Tenere 700

 
Often requested, often tried, but now avaiable in a perfect version. A special Tenere 700 silencer with silencer mounted in a high version. The linkage pipe and the silencer is mounted in a high position on the right hand side of the bike.
No damaged swing arms anymore, no problems in hard and tricky off-road use.Our recommendation when it comes to real off-road use with the Tenere.
Of course also for street use. With it's Euro 4 and Euro 5 homologation, this silencer is street legal as well.
 
The SP-1 Titan silencer combines the Italian passion for design and the years of experience of HP Corse in silencer construction.
This special SP-1 was developed especially for the Tenere 700. Developed at the HP Corse R&D center in Bologna / Italy, manufactured with a special hydroforming technology and made for the big and small adventurers around the world.
 
Manufactured from the highest quality materials, the silencer withstands the most demanding conditions on the gravel roads of the world. Developed for many thousands of kilometres - on- and off-road.
The silencer from HPCorse combines excellent performance with a perfect finish and first-class sound. Dyno bench tested, on road and on the most demanding tracks, the HP Corse exhaust is light, reliable, robust and guarantees an increase in performance compared to the original exhaust, especially at low and medium speeds. The muffler has a nice deep and rich sound and perfectly completes the beautiful, but also special design of the Tenere 700.
 
The exhaust system is Euro 4 and Euro 5 homologated. Upgraded with a carbon heat shield and the typical Rally style end cap, this silencer will give your Tenere the special look.
Nice, deep and powerful sound - much better that stock, but not too loud. Better power output in torque and hp as well.
Available as a street legal version with Euro 4/5 homologation.
 
Tested on the bench, on the hardest roads and gravel roads, SP-1 Titan guarantees reliability and superior performance compared to the original exhaust, generating a peak of power especially at low and medium rpm, as well as extraordinary torque.
 
Euro 4 and Euro 5 approved
 
Specifications:

• High up silencer kit
• Titanium / stainless steel version with matt black finish
• Silencer made of high quality, heat resistant titanium alloys and premium stainless steel
• Carbon made heat shield
• Exciting sound & design
• SKU: YAT700SP1300HTC-AB
• Weight reduction thanks to usage of quality materials
• Euro 4 and Euro 5 homologation
• Tail tidy kit necessary for mounting:
  • OEM Yamaha Tail Tidy
  • CamelADV Tail Tidy
  • R&G Racing Tail Tidy

 
Fits all:
Yamaha Tenere 700 2019- onawrds (Euro 4  + Euro 5 models)

There are so many things to love about the Yamaha 700 Tenere! Unfortunately, the exhaust is a bit of a Dr Jekyll and Mr Hyde situation.

It looks and sounds amazing but it has a dark side. It's located low and wide and is mounted on a very long exhaust hanger that's welded to the subframe. When the bike is dropped on the right side, the mount can be bent which allows the muffler to be pushed into the side of the swingarm. If it is not bent back before being ridden, the aluminum swing arm gets chewed up by the steel muffler (see photo below). Adding insult to injury, if you bend the hanger enough times, it can crack at the subframe. 

Having experienced the bent hanger and torn up swing arm personally, we came up with a new exhaust system the places the muffler up much higher and closer to the bikes centerline... out of harms way. To achieve this, we had to make a new link pipe and a new bracket to shorten the very long stock muffler hanger which greatly reduces leverage it sees making it much less likely to be bent in a drop.

We've been selling our "Rally Bend" high exhaust kit since December 2020. We've received lots of requests for a kit with a less aggressive muffler angle. Ask and you shall receive!

The v2 High Exhaust - Enduro Bend was designed for solo riders with rackless soft luggage.

Hard pannier racks and pillion pegs are not compatible with this kit!

Some "plate style" soft bag mounts are compatible. We will be adding these to this page as they are confirmed. If you require pillion pegs or hard pannier racks, our v1 High Exhaust - Rally Sweep kit is a great option.

The Details:

• TIG-welded, 304 stainless, "Lobster-Back", link pipe with wire heel guards 
• Our anodized CNC billet 6061 aluminum clamp. This mounting bracket is simple to install and reduces the hanger length (and leverage by about 50%). *Patent Pending*
• Scorpion Red Power premium muffler
• All fasteners, springs, exhaust clamp, graphite seal, and Camel ADV decals
• 2.1kg/4.5lbs lighter than the stock muffler and link pipe (with standard muffler)
• Easy to install with basic hand tools
• No ECU remapping is required for either muffler

We're happy to announce you can order your high exhaust kit with a Scorpion Red Power muffler! This muffler has many advantages over the base model unit.

Scorpion mufflers benefits:

• Scorpion Red Power – 30 years of exhaust development
• Hand-made in the United Kingdom
• Acoustically developed sound
• No repacking required
• Dual tone exhaust note with removable db killer
• Dyno tested for maximum riding enjoyment
• Lifetime guarantee (to the original purchaser)

*The OEM muffler and Akrapovic muffler ARE NOT compatible with this kit!*

*If a Tail Tidy is being used, we strongly recommend the OEM incandescent signal lights be replaced with smaller LED units. The signal light heat shield supplied in the exhaust kit will not fully cover the large OEM signal so they can be melted with exhaust heat. The OEM signals are OK if the OEM tail section (not a Tail Tidy) is retained.

*This kit's hanger bracket is officially Patent Pending*

The install videos below show the original silencer offered by CamelADV, but the process of fitting is identical using the Scorpion silencer. 

INTRO VIDEO

INSTALLATION VIDEO

Designed as a direct replacement of the bulky OEM silencer, the Scorpion kit features the popular Serket Parallel silencer.

With it's modern profile, the Serket silencer can be selected in one of 3 finisheds:

• brushed stainless steel
• black ceramic coated
• satin titanium finish

The innovative kit joins to the bike via a mandrel bent T304 stainless steel link pipe which incorporates the facility to re-install the OEM Yamaha heat shield

With the new exhaust showcasing striking visuals and a truly unmatchable deep Scorpion soundtrack, the slip-on kit also brings a tasty balance of performance figures to the Parallel Twin engine.

When installed, a power increase of over 3bhp is gained along with a sharper throttle response which is felt throughout the entire rev range.

The use of premium materials means the Scorpion slip-on kit weighs in almost 40% lighter when compared to the OEM silencer, benefiting the Tenere's manoeuvrability. 

RED POWER is something which can neither be seen nor touched; it’s a feeling which embodies the passion, performance and heat of competition drawn from over 20 years of motorcycle tuning and racing success.

And thanks to Scorpion’s technology transfer philosophy of sharing winning racing technologies, it’s a feeling which can be experienced by racers and road riders alike.

Hand Crafted Performance Exhausts

You only have to hold a Scorpion exhaust to appreciate the premium design and construction qualities, which translate into tangible gains in both performance and reliability. Hand crafted in England and widely regarded as the best bike exhaust on the market today, Scorpion has become one of the most popular upgrades a rider can make.

The real difference is the way a Scorpion feels. No other exhaust is created with our passion, expertise and experiences. Everything that we have put into developing the world’s best exhausts over the years is designed to be shared, felt and experienced by you, the rider.

Scorpion Stainless Steel Decat Headers for Yamaha Tenere 700

Riders wanting to take the next step in exhaust performance, Scorpion technicians have provided the solution with our de-cat racing headers. The de-cat pipework removes the bulky OE catalyst resulting in unobstructed gas-flow and is perfectly engineered for those riders pushing the boundaries of exhaust performance. (For closed circuit use only.) Our high-flow CNC mandrel bent headers eliminate back pressure when your bike's engine pushes out exhaust gasses, increasing your motorcycle's overall performance. Unleash the full potential of the Tenere 700 by combining the racing headers with our slip-on silencer, we highly recommend the resulting full system combination for those riders wanting all out performance.

Constructed out of the highest quality T304 stainless steel tube for longevity and durability, this totally new header kit for the Tenere 700 has been designed as a fully interchangeable setup and comes complete with precision mandrel bent header pipes and link pipes

• Fits to OEM Yamaha or Scorpion slip-on silencers.
• The kit is a 2-into-1 design with precision machined collars and flanges for a direct and accurate fit, It also removes the OEM cat for a smoother flowing setup. 
• Once installed, the Tenere 700 will receive an increase in power throughout the rev range.
• A fantastic weight saving of 1.2Kg also aids the maneuverability of all terrain bike.
• Improves the power and throttle response as well as adding that renowned Red Power exhaust note.
• Buyers of the header kit will mostly notice the perfectly matched, deep soundtrack that will sound lively as the power is put on.
• The Tenere 700 runs safely without remap but for optimal / maximum power potential a remap is recommended - see the associated RapidBike module

There are so many things to love about the Yamaha 700 Tenere! Unfortunately, the exhaust is a bit of a Dr Jekyll and Mr Hyde situation.

It looks and sounds amazing but it has a dark side. It's located low and wide and is mounted on a very long exhaust hanger that's welded to the subframe. When the bike is dropped on the right side, the mount can be bent which allows the muffler to be pushed into the side of the swingarm. If it is not bent back before being ridden, the aluminum swing arm gets chewed up by the steel muffler (see photo below). Adding insult to injury, if you bend the hanger enough times, it can crack at the subframe. 

Having experienced the bent hanger and torn up swing arm personally, we came up with a new exhaust system the places the muffler up much higher and closer to the bikes centerline... out of harms way. To achieve this, we had to make a new link pipe and a new bracket to shorten the very long stock muffler hanger which greatly reduces leverage it sees making it much less likely to be bent in a drop.

The kit includes:

• TIG welded, 304 stainless, "Lobster-Back", robotically welded link pipe with wire heel guards for both the rider and pillion.
• Our anodized CNC machined billet 6061 aluminum clamp. This mounting bracket is simple to install and reduces the hanger length (and leverage by about 50%). *Patent Pending*
• A generic Stainless Steel silencer. This silencer is lightweight, durable and sounds great!
• Indicator Heatshields.
• All fasteners, springs, exhaust clamp, graphite seal and Camel ADV decals.

Features:

• Compatible with most pannier racks
• Easy to install with basic hand tools

Pannier compatibility:

• Yamaha OEM 
• Touratech Zega
• SW Motech PRO
• Ride ADV Solo racks
• Rally Raid soft bag plates
• ADV Spec soft bag plates (require 17mm spacers and longer bolts)
• 2nd Gen Outback Motortek Symmetrical and Asymmetrical racks
• Tusk
• Mosko Moto Reckless series
• Giant Loop

*If a Tail Tidy is being used, we strongly recommend the OEM incandescent signal lights be replaced with smaller LED units. The signal light heat shield supplied in the exhaust kit will not fully cover the large OEM signal so they can be melted with exhaust heat. The OEM signals are OK if the OEM tail section (not a Tail Tidy) is retained.

*This kit's hanger bracket is officially Patent Pending*

The install videos below show the original silencer offered by CamelADV, but the process of fitting is identical using the current generic silencer. 

INTRO VIDEO

INSTALLATION VIDEO