Michelin 2mm Heavy Duty Reinforced Inner Tube suitable for 21" Front Wheel

Changing a tyre is hard enough without having to worry about damaging the wheel. Traditional wheel protectors are good insurance, but can be a pain to use. They are hard to keep in place, difficult to manipulate from one position to another, and they tend to get pulled inside the tire at the end of the job leaving you struggling to fish them out before airing up the tyre.

The new improved patented Motion Pro RimShield II™ now made with genuine DuPont Zytel, a super tough nylon resin offer unmatched strength and durability.

The RimShield II™ provides excellent protection to the rim of the wheel and features a large flat area that extends towards the hub of the wheel to protect the spokes and inner part of the wheel, also providing a working platform for your tyre levers. It features raised ridges on either side of the tool which hold the bead of the tyre up, making it much easier to insert tyre levers under the bead of the tyre. The extension part of the RimShield II™ also has two finger holes to make repositioning fast and easy and allows the RimShield II™ to be easily removed at the end of the installation process.

The RimShield II™ is the perfect tool for changing tyres on that special wheel that just can’t have any scratches and also makes changing tyres a lot easier

• New and improved version of original Rim Shield
• Now made with genuine DuPont Zytel Super Tough nylon resin for unmatched strength and durability
• Prevents rim damage from tire levers during tire changes
• Dual raised beads facilitate inserting tire lever under tire bead and prevents tire lever from slipping
• Won't mar wheels
• Finger holes make it easy to insert and remove
• Long apron protects hands and spokes
• Patented design
• Sold in set of 2

• New and improved design of the original Bead Buddy®
• Durable 6061 aluminum with blue anodized finish and laser engraved logo
• Used to push the tire bead down into the drop center of the rim on off-road wheels while using tyre tools to change tires
• Hooks over spoke and pushes bead down on opposite side of tyre from tyre irons
• No more fighting to keep bead down while installing off-road tyres
• Patented design

The Bead Pro Tyre Tool is an innovative, compact and lightweight tool that makes it a breeze to break tyre beads and change tyres on the road, trail, or even in the shop

A lot of current tyre and wheel combinations, especially some of the tubeless adventure bike assemblies, are difficult to change out on the road, and sometimes even in your garage. Modern safety bead designs make it hard to break the bead without large, bulky professional tools. 

The patent pending Bead Pro Tyre Tool is a must have accessory for dual sport riders, or anybody that needs a surefire and easy way to change or repair tyres on the road or trail.

The Bead Pro Tyre Tool is a two lever set that incorporates a forked bead breaker feature on one end of each lever that work together to perform the bead breaking function. 

The other end of each lever has a perfectly contoured tyre lever spoon to ease tyres off and back on the rim while protecting the tyre and rim from damage. 

The body of each lever has a unique cross guard feature that provides a secure grip on the levers when breaking a bead. 

The Bead Pro tyre lever set is forged from super strong 7075-T6 aluminum and features an attractive black anodized finish with laser engraved markings.

The Bead Pro Tyre Tool set is sized to fit easily in a travel or tool bag and weighs just 9 ounces.  You will love the compact size, light weight, and incredible functionality of this amazing new tool.

• Innovative multi-use tyre tool set
• Breaks the bead on most street and off road motorcycle tyres
• Integrated tyre spoons for tyre removal and installation
• Light weight and compact size is perfect for tool packs (just 9 ounces for set of 2)
• Length of each lever is 249 mm (9.8")
• Ergonomic handles with crossguard to keep hand from riding forward
• Forged 7075-T6 aluminum construction for strength and durability
• Black anodized finish
• Patented Design

Buzetti Tyre Levers - Set of 3 - 00-962

The best tyre levers you can get!

This set of 3 levers is 240mm long and includes a spoke loop (spare finger) to hold one lever in place whilst you handle the other two levers.

Rocky Creek Designs strives to manufacture motorcycle accessories which appeal and are “different”, creating a “must have” for motorcyclists all over the world!

This is a great little pump. ULTRA compact, this stripped down pocket pump weighs in at only 345g and fits in the palm of your hand. Built around a custom modified 12 volt inflator. What it lacks in looks, it makes up for in performance and functionality – which is what you really need when you’re stranded in the middle of nowhere.

Our Pocket Pump has proved to be an efficient “pocket sized” pump since 2013 up until 2023. No changes had to be made to the pump during the 10 years the Pocket Pump has been on the market and we are very proud that this is now a worldwide success.

To continue the success of the pump, we decided to change it up a little, and have “finally” put a cover on it! Because technology has changed quite a lot in the last 10 years, we have also managed to make the pump SMALLER (100 x 74 x 37mm) in size and half the weight of it (345g).

It still pumps over 130 psi and will inflate a 150/70 R18 tyre from 0 to 31psi in 3 minutes!!

There is a built-in “checking valve” on the pump so you can attach your pressure gauge to the valve and check the tyre pressure at any time.

Comes with a 185mm inflation hose, 2m long power cord with SAE connector, alligator clips with SAE connector and a top quality zippered EVA bag.

New from Australia, simply the best performance and compact design inflation pump we’ve seen! Check out the video below… how many compact pumps have you seen blow a tyre back on it’s bead???

Motion Pro Wheel Removal Toolkit - Tenere 700

Quality toolkit from Motion Pro which enables you to remove both front and rear wheels when out on the trail in case of puncture, etc.

The kit contains the following Motion Pro tools:

08-0288 - T-6 Combo Lever 27mm  (Rear Wheel)

• Perfectly contoured tire spoon on one end
• Hex box wrench for 27 mm axle nuts on other end
• Lightweight forged 7075 T-6 aluminum
• Hard anodized finish
• Under 10 inches in length and weigh only 3.5 oz.
• Hex end is rated for a maximum torque of 90 lb/ft

08-0327 - T-6 Combo Lever Adapter 27mm to 3/8 In Drive

• Allows your T-6 Combo Lever™ to be used as a 3/8" driver
• 3/8" drive male and 1/4" drive female for use with sockets for smaller front axles
• Lightweight billet 7075 T-6 aluminum with chrome vanadium steel insert
• Lightening holes
• Coin knurled to facilitate turning sockets by hand
• Awarded Product of the Year in Dirt Rider Magazine
• 3/8" square drive is rated for a maximum torque of 90 lb/ft

08-0355 - Superlight T-6 Hex Axle Tool 17,19,22,24 mm (Front Wheel)

• Four metric hex sizes: 17, 19, 22 and 24 mm
• Made from billet 7075-T6 aluminum
• Weighs only 2.5 oz
• Ideal for touring and trail side use
• 3/8" square drive on both ends rated to 90 lb/ft
• Use wrench on external hex of tool for situations exceeding 90 lb/ft

Supplied as a pair (2 off)

Creates a tight seal around your tyre valve, keeping dirt and water out of your tyre.

Choose colour - Red, Blue or Black

THIS VERSION HAS BEEN DISCONTINUED BY  MICHELIN.  A NEW AND UPDATED VERSION WILL BE AVAILABLE IN 2022

Introducing our first tyre pressure monitoring system (TPMS) for motorcycles – bringing new levels of safety to riders for whom tyre condition is paramount.

MICHELIN TPMS – BIKE by Fit2Go detects a tyre in distress through loss of pressure, fast leakage or an increase in temperature – often the sign of an impending blowout. Its compact display flashes as brightly as a mobile phone torch if it detects an issue, plus identifies whether it is the front or rear tyre affected.

This patented solution can be fitted in less than two minutes, bringing the same direct TPMS technology already proven in the passenger car and van markets to two-wheels for the first time.

HOW DOES IT WORK?
This wireless system needs no programming and features a compact LCD screen which fits into a magnetic mount placed on a prominent part of the bike. The fully sealed and buttonless device can be quickly removed for security and is small enough to fit in a pocket.

The display offers a battery life of up to three months, with the USB-powered inductive charger making it simple to top-up.

Once fitted, the unit displays the pressure of both tyres, in either psi or bar, toggling between the front and rear at set intervals.

Riders will see a low-pressure warning if a tyre becomes under-inflated by 15%, an enhanced alert when the pressure either drops by 25%, or if over-inflated by 35% or more. There are also alerts for high tyre temperatures or fast leakage (at least 2 psi per minute).

WHY SHOULD YOU FIT IT?
Riding on incorrectly inflated rubber or suffering a tyre failure on two wheels is a potential nightmare scenario for any rider.

Our system continually monitors both tyres and provides precise pressure readings – unlike indirect TPMS solutions which typically offer estimates via the bike’s brake sensors.

Under-inflated tyres can seriously affect a motorcycle’s handling as they become deformed, reducing contact with the road and risking the tyre being pulled off the rim. The tyres are also more likely to overheat or be damaged by debris, whilst over-inflation can lead to uneven wear, reduced handling and poor ride comfort.

WHAT’S INCLUDED?

• Our unique ‘plug & play’ kit comes as standard with:
• Magnetic display mount
• USB-powered inductive charger
• Two sensors to replace the original valve caps
• Two locking wheel nuts with accompanying spanner (optional fit)
• Installation instructions

OFFICIAL LICENSEE
Fit2Go TPMS is an official global licensee of  Michelin, one of the world’s largest tyre manufacturers.

So confident is Michelin in the quality of the Fit2Go technology, that each product carries the iconic Michelin logo and features the world-famous Michelin Man himself.

All products have undergone rigorous testing at Michelin’s impressive research and development facility in France, where its tyres are created.

Michelin 2mm Heavy Duty Reinforced Inner Tube suitable for 18" Rear Wheel.

Suitable for 140/80 and 150/70 18" rear Tyres.