Increase the service life for your USD forks with more effective protection from mud and dirt.

• Made from NEOSKIN (coated neoprene).
• Easy fit/clean, no fork disassembly required.

FEATURES

Kriega Fork Seals are extremely easy to fit. They fit using hook and loop fabric which means no fork dis-assembly is required. Neoprene fork seals are most effective when they are fresh and clean. Old school fork protectors are difficult to clean under, our design allows you to clean them every ride if you need to. They can be fitted without cable ties, but you will get increased service life by using cable ties to protect the NeoSkin from the fork slider.

TECH-SPECS

• Easy fit - hook and loop design
• Easy clean - every ride
• No fork dis-assembly required
• Use with or without cable ties
• USD fitment only
• Black with silver logo
• Universal fit
• NEOSKIN: coated neoprene
• 3M Scotchlite reflective print

Attatches to your forks to provide a semi rigid pulling point. Made from ultratough Hypalon, lined with Toughtek which grips wet or dry. Comes with stainless steel buckles in one size fits all. Perfect for extreme enduro and adventure riding.

You know the feeling as the bikes front end gently sinks downwards into that unseen bog, or your line choice doesnt turn out to be quite what you had hoped on that steep rocky climb...The cry goes out,' give us a hand!'. But what to pull on with one hand that doesnt mess with your steering or cover your new found assistant with roost from the back wheel? We think we've found the answer!!!

Intended for Enduro racing, where you often have to coax your bike out of trouble or over obstacles using manpower, the Kriega Haul Loop is an extremely strong, semi-rigid strap that fit onto any motorbike forks. The rigidity makes them stand proud of the forks, making it easy to grasp without needing to look for them, while materials like Hypalon and Toughtek fabrics along with big stainless steel buckles mean they’ll support the weight of even the largest of dual sport adventure bikes.

Taking a heavy motorbike offroad can be a bit daunting. What if you get stuck in the mud? What if you take a tumble down a bank into the undergrowth? How would you get it out with no other help on hand? Fit a Kreiga haul loop in case you need to manhandle the bike through any problem.

• Semi-rigid design.
• Ultra-tough Hypalon.
• Toughtek – grips wet or dry.
• Stainless steel buckles.
• Universal fit – front only.

If you want the best you can get then look no further - SKF Green Fork Seals are world renowned to be the best - race and rally proven.

The SKF Green Fork Seal Kit, has been developed by SKF to achieve superior sealing performance while reducing friction, and is suitable for all high-end motorcycle forks.

As a result of SKF’s extensive experience in the design and material development of seals for suspension systems, SKF has developed a new self-lubricating compound.

The design and performance characteristics of the seals made from this compound enable them to keep oil in and contaminants out of the fork, while virtually eliminating stick-slip and improving performance by reducing friction. 

The kit contains 2 x oil seals and 2 x wiper seals designed to withstand contaminated operating conditions and provide low friction, limited air suction and allow consistent hydraulic performance at factory setting levels.

We haven't had chance to run a set through the workshop yet to show you, but there are lots of YouTube films showing the difference in stiction between OEM fork seals and SKF fork seals.

Features

• The kit is comprised of 2 x dust scrapers and 2 x oil seals
• The dust scraper is the first guard against dirt entering the fork and contaminating the other components in the fork
• The oil seal prevents oil from exiting the fork
• Specially developed NBR elastomer with lower friction characteristics 
• Made of a new self-lubricating compound developed to achieve superior sealing performance.
• New oil seal lip geometry specific to fork seals

Benefits

• Increased life and performance 
• Enhanced water and dirt protection capability 
• Reduced and constant friction over the life of seal
• Over 20% friction reduction 
• Much improved ride comfort 
• Compatibility with a wide range of OE and aftermarket oils 
• Reduced wear and air suction 

Laboratory tests verified that SKF fork seals reduce friction by more than 20% and keeping it constant during the operation. 

Stick-slip was also reduced when compared to standard seals. Diagrams 1 and 2 show the load distribution over the stroke of the fork (spikes represent vibrations) and the value of the friction generated by the seals during operation (force) both in the case of chrome plated and hard coated rod.

In field tests, riders experienced a much smoother feeling that results in better accuracy and more comfort.

SKF, the leading global supplier of seals for automotive and two wheel applications, offers a series of seals to the aftermarket, for motorcycle forks.

Our extensive experience in the area of shock absorber seals has lead to the development of a new seal that will enhance the enjoyment of your ride.

Seals for motorcycle suspension differs according to the application: oil seals and wiper rings for the front fork, usually monotube seals for the rear suspension, and special seals for the steering damper. Even though operating pressures and temperatures in motorcycles are moderate when compared to a car or truck, there are some specific factors to be considered.

• Enduro or motocross forks are the most demanding applications due to a long stroke, high speed and contaminated operating conditions.
• For high performance street motorcycles, the vibration frequency can be extremely high, causing chattering.
• In addition, there are special dust protection requirements due to the exposed position of the fork and the absence of protective bellows.

In the above applications, the rider is in direct contact with the front suspension via the handlebars. Therefore, the smoothness of fork movement is vital, as it has a considerable impact on steering behaviour.

• Allows you to measure suspension sag by yourself easily.
• Compact design, it does not take much space in your tool box.
• Measure front and rear suspension sag easily with this kit.
• Clamp comes with rubber and will not damage your plastic fenders or side panels.
• Clamp anywhere on side panels, rear fender or sub frames, to measure suspension sag.

• Compatible with most forks
• Made of aluminium, anodised finish with laser printed logo
• Using the principle of leverage, the fork seal removal tool makes removing fork seals easy.
• Won’t scratch your front fork body.

• 43mm - XRV650/750, BMW F650/700/800GS)
• 45mm - CRF1000
• 48mm - KTM Adventure

• Specially designed fork seal driving tools for front forks.
• Comes with 5 different size plastic adapter can be used for most conventional and up side down front forks.
  • 40/41,
  • 42/43,
  • 45/46,
  • 47/48,
  • 49/50
• Flange shape design of steel body for less power and accurate operation.

The Hyperpro front fork springs are mainly progressive to give the best performance.

These fork springs when installed along with the Hyperpro Rear Shock Spring will raise the bike by 20mm.

This will enable you to configure a better handling, more stable ride using the range of adjustability on the forks and shock absorber to adjust it to the correct suspension setting.

The progressive spring kit comes with:

• front fork springs
• fork oil
• comprehensive installation manual

As standard the CRF1100 has excessive sag on the rear, so the suspension specialists from the Netherlands have designed a rising rate spring fitting for the OEM shock, which raises the bike by 20mm.

This enables you to configurate a better handling, more stable ride and using the range of adjustability on the shock to adjust it to the correct suspension setting.

Available in either Purple or Black - please select your colour choice

The kit contains two fork stickers made of crystall material (thickness 0,5 mm), size 22cm X 17cm, suitable to be applied on your forks as additional protection.

Silk-screen printed with resistant and bright inks the used crystall is 0,5mm thick combined with a strong and long lasting adhesive, that are specifically designed for off-road use. 

To obtain the best result, the sticker must always be warmed up with a dryer and exposed to a light pressure. 

Do not use soaps or solvents; just clean up the surface with a dry rag.