LSK Off-Road Dongle - Tenere 700 / World Raid - Control ABS on Tenere 700 (color TFT models) with a stock button plus add the ABS settings memory!

Plug-and-play Dongle that adds the memory for ABS settings and enables full control over ABS by using the stock "ABS" button.

Everything is done through data communication with the ABS unit. Without cutting any wires in the loom, and with no errors, it behaves just like a 'factory' option.

Compatibility

• Working on Yamaha Tenere 700 - only on models with color TFT displays.
  • Tenere 700 2023 (EU models).
  • Tenere 700 2024+ (EU and US models).
  • Tenere 700 World Raid 2022+ (EU and US models).
  • ... and all other Tenere 700 model versions with color TFT screen.
• Older models requires a different Dongle that will be developed in the near future.

How it works

The Dongle modifies the motorcycle's behavior to what you would expect it to have directly from the manufacturer.

It is expanding the functionality of the ABS button and adding the ABS memory.

The new behavior will be as follows:

• A short push of stock "ABS" button will toggle between the rear ABS OFF and ABS ON.
• A long hold (approx. 1 second) of stock "ABS" button will turn ABS completely OFF (front and rear ABS).
• ABS settings are retained in memory even after turning the motorcycle OFF and ON.

Note: The changes of ABS settings still can be done only when the bike is not moving - this is unfortunately hard-coded in ECU.

Why do you need it

• It completely eliminates the time-consuming setting of ABS when driving in off-road or anywhere else.
• It allows you to return to the riding basics also with the modern bike. Just sit and enjoy the ride.

Installation
Plug-and-play installation. Simply disconnect two connectors near the battery and connect the Dongle between them.
User's manual

Legality and safety

• Dongle does nothing more than what can be set by hand on the original instrument panel. It just combines all the procedure to one click or automates them after startup (the memory).
• Please be careful during all riding and especially when you turn OFF the ABS. Do it only when you know what you are doing!

FAQs:

Can the Dongle damage anything on the bike in case of failure?

• In case of Dongle failure the bike will enter safe mode but nothing will be damaged. After disconnecting the malfunctioning Dongle everything will return to normal. The error symbol on dashboard will disappear after few short rides.
• Both CAN bus itself and devices connected to this bus are immune to failures of other connected devices so the Dongle failure will not damage them.
• Power is drawn from the tail light connector - it is nearest available 12V power that is switched with keyswitch. The Dongle failure only blow the fuse.
• However, this device interferes with other onboard electronic systems even if it is in disabled state. In case of its failure ABS and some info on the dashboard may be unavailable. By installing this device, you assume all responsibility for possible damage to health and property caused by the incorrect function of this device and the subsequent malfunction of other electronic systems of the motorcycle.

Can the Dongle affect the warranty of the bike?

• The Dongle communicates trough the CAN bus data connection with the dashboard and ECU and it is designed to automotive standards. The ECU and the Dashboard is unaware of whether the message containing the required settings is transmitted by the Dongle instead of the dashboard. The messages are absolutely identical to those sent by display panel. Therefore, if you disconnect the Dongle prior to making motorcycle warranty claim, there will be no indication that this device was ever connected.
• However, installation of the Dongle is your responsibility. Do not take this as a guide on how to circumvent the motorcycle's warranty conditions. It's just a description of how the Dongle interacts with the bike. It is still a piece of equipment that is not approved by Honda as an original accessory and you are responsible for any problems caused by its installation and use.

Double USB socket for attachment to the handlebar or for installation in a location of your choice.

• Input voltage 12V - 24V
• 2 charging ports: USB-C and USB-A
• Quick Charge 3.0 for fast charging

 
The socket provides a power supply for up to 2 external consumers (one USB-C and one USB-A port), e.g. for navigation devices, cell phones, MP3 players, etc.

Thanks to the Quick Charge 3.0 charging function, your devices will be charged again in no time.

The innovative protective cover acts as a discharge protection for the motorcycle battery: as soon as the cover is put on, the power supply is interrupted.
 

Features:

• Quick Charge 3.0 charging function
• 2 ports: USB-C and USB-A
• Universal mount for inch and metric handlebars (21-25cm)
• Installation of cladding is possible as an alternative
• Protective cover with discharge protection function
• waterproof according to IPX6 (when closed)
• Input voltage: 12V - 24V
• Output voltage/current: 5V/3A, 9V/2A, 12V/1.5A
• Installation depth (inside) 45 mm
• Diameter (inner) 28 mm

 
Socket Details:

• Double USB on-board socket with protective cover (IPX6 waterproof)
• Connection cable (length 170 cm)
• Fuse

RapidBike Electronic Quick Shift Kit

Quick Shifter: Load sensor cell plugs into RapidBike EVO Exclusiv, EVO or RACING module and manages power cut to allow an up-shift without using the clutch or closing the throttle 

The latest Rapid Bike SHIFT ASSIST module represents a big step forward in terms of a quick-shifting solution thanks to further technological development to perform up-shifting (traditional mode). A new device reaching unmatched technical standards designed to deliver outstanding performance to track enthusiasts and further improve your riding experience.

New shifting device exchanging information with EVO and RACING add-on modules via CAN-bus allows it to perform auto-calibration of shifting kill-time in relation to the pressure applied in both directions, upper and lower gear, while matching the specific engine configuration. Allowing greater handlebar control and lower mechanical stress, granted by the unique ‘self-learning’ process.

Requires the fitment of either a RapidBike EVO Exclusiv, EVO, or RACE module

Includes the correct additional Shift Rod required for the Tenere 700 and World Raid.

CamelADV Side Stand Safety Switch Bypass Plug - Tenere 700

Your T7's side stand safety switch makes it impossible for you to ride away with your side stand down. It is a handy feature until your switch is damaged while riding offroad. When that happens, your bike will not run in gear, which can leave you stranded on the side of the trail.

Luckily, our bypass plug is cheap and easy to install! 

There's not much more to say about this simple part!

Install Video: