Designed and manufactured in Britain from hard anodised aluminium.

Colour - Matt Silver

This item fits the following models:
- Africa Twin RD04
- Africa Twin RD07
- Africa Twin RD07A
- Transalp XL650V
- Varadero 125
- Varadero 1000

Designed and manufactured in Britain aluminium.

Colour - Matt Black

All fittings required for this item are included.

This item fits the following models:
- Africa Twin RD07
- Africa Twin RD07A

Designed and manufactured in Britain aluminium.

Colour - Matt Silver

Spacers for this item are included.

This item fits the following models:
- Africa Twin RD07
- Africa Twin RD07A

If yours is broken, worn, or feels a bit sloppy, replace it!

This is a direct high quality replacement complete brake lever for your original one.

This complete brake lever fits the following models:
•XL600 V Transalp 600 (94-96)
•XL650 V Transalp 650 (02)
•XL650 V Transalp 650 (03-06)
•XL650 V Transalp 650 (97-01)
•XRV650 Africa Twin RD03 (88-89)
•XRV750 Africa Twin RD04 (90-92)
•XRV750 Africa Twin RD07 (93-95)
•XRV750 Africa Twin RD07A (96-03)

This Japanese pattern part is a high quality replacement.

Identical to the OEM part, this is a perfect replacement for your brittle, damaged, or faded rear lens.

Your tail light lens can become brittle over time, and if you are a bit over zealous with a screwdriver when tightening up the lens onto the gasket, you can snap off the plastic internal threaded part, leaving you unable to secure the lens.

Aftermarket alternative to Honda #35340MM5600

The position of the bleed nipples render them prone to road salt damage, corrosion and of course damage from using incorrect tools!

Fits both front and rear brake calipers.

Fitting genuine Honda brake disc bolts when refurbishing the brake system will mean using the same items used by the Honda factory.

Why risk any other make of bolt with something as important as the brakes!

Use genuine Honda bolts - The factory did!

RD03
Front disc uses 6 bolts
Rear disc uses 4 bolts

RD04/07/07A
Each front disc uses 4 bolts (8 in total)
Rear disc uses 4 bolts

HEL brake lines are British manufactured and tested on the most demanding roads and tracks around the world.

Lifetime warranty
The highest quality components and build of a HEL brake hose means that HEL can offer a life time warranty with all brake hose kits.

Hel Braided Brake Hoses: Front Race Set Up
The race set up has a separate line from the master cylinder to each caliper. Many people find this system easier to bleed than an over-the-mudguard setup, as in an over-the-mudguard setup air bubbles can get caught in the arc of the shorter hose. (See comparison of setups below).
Race hoses are required for race days where over-the-mudguard setups are banned.

What's in a Hel Race Set Up Brake Line Kit?
• Stainless Steel Brake Lines
• Stainless Steel Banjo Bolts
• Copper Crush Washers
• Fitting Guide
• Personal Lifetime Warranty Number

Stainless Steel Braided Brake Hoses
All HEL hoses are made from stainless steel braided fluoro-polymer - this avoids any corrosion issues and prevents distortion of the hose thereby increasing the efficiency of braking compared to a rubber hose.
A PVC coating is applied during manufacture, not heat-shrunk on afterwards, which protects your bodywork, and importantly stops any grit getting into the stainless braid and potentially causing wear. Not all manufacturers coat their braided lines with PVC!
The swaged fittings are lighter and slimmer than reusable fittings and are all made of high quality stainless steel.
Each HEL Performance brake line kit is assembled in-house from the finest quality stainless steel fittings swaged directly to hard drawn tensile stainless steel braided hose.

Why HEL Brake Hose?
HEL Brake line kits eliminate that 'spongy' feeling often found with rubber hoses under extreme braking conditions - the time when performance is needed the most. By replacing the original rubber hoses with our complete system you will remove this sponginess and your braking will deliver new levels of precision.
Don't risk using inferior brake lines when you can trust us to improve braking reliability and performance - We use stainless steel in our lines and our fittings. Most competitors use zinc plated fittings which are at risk from corrosion.
• Smoother & Stronger Braking
• Finest Quality Stainless Steel Braided Hose
• Stainless Steel Fittings and Banjo Bolts
• Eliminate That Spongy Feeling
• Sharper and More Responsive Braking
• Lifetime Warranty
• More Reliable Braking System
• Superior Abrasion and Corrosion Resistance
• Race Proven Technology

Safety
HEL hoses are proven time and time again both in the lab and on the race track.
Manufactured in the UK, HEL pass all requirements of FMVSS-106; strict testing criteria that all hoses must pass to be legally used on the road. These standards are then used by:
• DOT and NHSTA (USA),
• TUV (Germany),
• ADR (Australia),
• LTSA (New Zealand),
• IDR (Israel),
• MOT (Europe).
Having passed these requirements with flying colours, HEL Performance brake lines can be used anywhere in the world.
HEL Performance are very proud of the fact that all the brake line components are made in Britain, including the stainless steel braided brake hose and all the stainless steel brake line fittings. From small beginnings HEL performance products have gone global and are now available all over the world in over sixty-eight countries and, having passed stringent safety standards by regulators across the globe, are street legal anywhere in the world.

One other salient point - HEL brake line kits come with a lifetime warranty - what's not to like!