HEX ezCAN II / Denali D4 Light Kit - Tenere 700

Product no.: H3-YT7-002-D4

Out Of Stock

£615.88
  • UK - Price Includes VAT
  • Non UK -  VAT (20%) will be removed at checkout
  • Price excludes delivery


ezcan_logo_trans-1024x387     Denali-Logo-1

 

HEX ezCAN II YARI for the Yamaha Tenere 700 (all models and versions). 

YOUR BIKE. YOUR RULES. YOUR SAFETY.

The ezCAN plugs directly into your Tenere and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!

The power to manage your accessories safely.

The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.

Customise your bike and make it safer to ride.

 

Yamaha_Customise

 

KEY FEATURES.

  • One device manages everything
  • Integrated control
  • Integrates additional safety features
  • Does not void warranty
  • Plugs directly into CAN-Bus (saves installation time and wiring complexity)
  • Unobtrusive – fits perfectly under the seat
  • Easy configuration of software via USB (Mac and Windows PC)
  • Four individually electronically fused channels
  • Waterproof and dust-proof

EASY INSTALLATION. (follow this Link for install guide)

  • Download and install the configuration software 
  • Install the ezCAN under the seat or side panel
  • Route and connect the ezCAN battery cables
  • Route and plug the ezCAN into the motorcycle CAN-bus
  • Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)

This HEX ezCAN will work on the following bike models:

  • Ténéré 700 (2019-2022)
  • Ténéré 700 Rally Edition (2020-2022)
  • Ténéré 700 World Raid (2022+)
  • Ténéré 700 (2023+)
  • Ténéré 700 Rally Edition (2023+)
  • Ténéré 700 Extreme Edition (2023+)
  • Ténéré 700 Explore Edition (2023+)

This product is supplied with two diagnostic port adapter cables allowing support for both Euro4 & Euro5 models of bike.

NOTE: If you are planning on installing auxiliary lights and / or a Denali SoundBomb Horn, please add the EXTENSION HARNESS KIT

 

Yamaha_Unleash

 

WHAT'S IN THE BOX

  • 1 x ezCAN Device
  • 1 x Micro USB Cable
  • 2 x Velcro Strips
  • 2 x Blanking Plugs
  • 4 x Cable Ties
  • 4 x Two-wire stub connectors (Orange)
  • 4 x Terminal wires (Orange)
  • 4 x Blanking seals
  • 1 x Green Horn Harness
  • 1 x Blue 4-way High beam Harness (for bikes with colour TFT display)
  • 1 x Blue 6-way High beam Harness (for bikes with monochrome display)
  • 1 x Euro5 diagnostic adapter (2022+ Euro5 models)
  • 1 x Euro4 diagnostic adapter (2019-2022 Euro4 models)

ezCAN-Yari-DeviceezCAN-Yari-Diagnostics-04

 

The HEX ezCAN Extension Harness Kit provides you with everything that you need to connect your auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.

The kit contains:

  • 2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
  • 1 x 0.5m 3-core extension cable (typically used for brake lights)
  • 1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
  • 3 x female MT-3 connector kit including pins and wire seals
  • 5 x male MT-3 connector kit including pins and wire seals
  • 5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
  • 6 x 20mm adhesive lined Heat-shrink
  • 2 x female spade connector terminals (6.3mm)
  • 1m Sheathing

blank_Harness

 

Denali D4 TriOptic™ Driving Lights

Simply put; the DENALI D4 is a beast. It is DENALI’s most powerful light packing the punch of 4380 lumens in an aggressively styled housing.

The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing.

The included spot lens throws a massive beam of light and carries an official E-Mark certification. 

DNL.D4.10000_1_2000x

Features

  • High-Intensity Series Cree LEDs outputting 4380 lumens per pod
  • DrySeal™ Submersible Waterproof light can withstand the most extreme environments 
  • LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating 
  • Low profile mounting bracket with stainless steel hardware included 
  • Additional E-Mark Approved flood lens included 
  • Amber lenses available (sold separately) DNL.D4.10100 

 

 

Beam Performance (pair) 

 

DNL.D4.10000_8_05a6cc5e-c7cd-49c1-be91-ba45c2608478_2000x

 

Specs (single pod)  

  • LED’s: (4x) 10 Watt Cree XPL HI 
  • Power Draw: 3.3 Amps 
  • Raw Lumens: 4380 
  • DataDim™ Compatible: Yes 
  • Operating Voltage: 12 VDC 
  • Pod Size: 3.9” Square x 2.6” Deep 
  • Pod Weight: 1.55 lbs
  • IP67 Waterproof & Submersible 
  • E Mark Approved Spot Lens 

What’s in the Box?

  • (2x) D4 LED Light Pods 
  • (2x) True-Hybrid™ Lenses (Installed) 
  • (2x) E-Mark Approved Spot Lenses (included) 
  • (2x) Hinge Mounts with M8 Stainless Steel Hardware 
  • (2x) Wiring Pigtail 

 

We also recommend

*
  • UK - Price Includes VAT
  • Non UK -  VAT will be removed at checkout
  • Price excludes delivery

Browse these categories as well: HEX Innovate, All, Electrics, Lighting, All, Electrics, Lighting