OEM Honda LED Indicator - FRONT RIGHT

OEM Honda LED Indicator - REAR LEFT

This is the original fitment fog light switch that fits your CRF1000 Instrument Panel.

Can be wired with aftermarket lights for a 'factory look' install.

This one piece Headlight Guard will protect your expensive LED headlights from stones and damage.

Available in either CLEAR, or LIGHT TINT (both are road legal in the UK)

Fixed in place using the tried and tested 3M Dual Lock fastening.

OEM Honda LED Indicator - REAR RIGHT

Manufactured using 3mm Polycarbonate and a very robust metal frame with 4 mounting points to ensure a secure and 'wobble free' mounting.

Fully compatible with the OEM Honda Upper Bars.

FITTING INSTRUCTIONS

OEM Honda LED Indicator - FRONT LEFT

This auxiliary light mount for the Honda Africa Twin CRF1000 provides a secure mounting solution for fitment of aftermarket lighting.  

Robust steel bracketry is laser cut for a precise fit and finished in a durable black powder coating. 

This versatile light mount is compatible with most popular brands of aftermarket lights. 

Existing bolt holes on the front subframe are utilised without the need to drill, cut, weld or modify any components. 

The low profile design positions the lights close to the fairing for maximum visibility while also minimising the risk of damage during a tip over or fall. 

Note:
Fully compatible with SW Motech and Outback Mototek Crashbars

This auxiliary light mount WILL NOT fit with Upper Crash Bars from Rugged Roads, Touratech, Givi, Rumbux, Holan, and Hepco & Becker
 

Features: 

• Robust laser cut steel construction
• Attractive & durable powder coated finish
• Bolt on installation does not require drilling, cutting or other modifications
• Utilises existing front subframe mounting locations for fitment
• Compatible with most brands of auxiliary lights
• M8 sized light mounting hole
• Provides a very clean and factory looking installation
• Low profile design positions the lights close to the fairing to minimise damage in a tip over or fall
• Two piece mount makes installation simple

What's in the box:

• Auxiliary light mount for Honda Africa Twin CRF1000 (left & right side brackets)
• Mounting hardware
• Installation instructions

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile.

The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit.

Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch.

Our DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up. 

 
DENALI 2.0 Features 

• HiDrive High-Intensity Cree LED's 
• TriOptic Multi-Beam Lens System 
• DataDim LED Dimming Technology 
• HotSwap Modular Wiring Harness System
• DrySeal Submersible Waterproof Illuminated Switch
• DrySeal Submersible Waterproof Light Housings 
• Impact PC Corrosion-Proof Bezels
• LiveActive Intelligent Thermal Management
• Chrome Plated Optic Holders
• Low-Profile Mount with Stainless Steel Hardware
• Handlebar Switch Mounts Included
• E Mark Lenses Included

 
Features Explained:

HiDrive High-Intensity 10 Watt LED's:
2.0 lights feature the latest development from Cree; a new Hi-Intensity LED chip that features a redesigned primary optic to maximize light output through secondary optics. The “HI” series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw.  

TriOptic Multi-Beam Lens System:
2.0 Light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. 

Data Dim LED Dimming Technology:
All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.   Plug in our DataDim Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. 

Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming.     

HotSwap Modular Wiring Harness System:
Our premium wiring harness features high-quality waterproof components and our clever HotSwap design that enables an effortless swap from the standard single-intensity relay to our dual-intensity DataDim controller (sold separately). 

DrySeal Submersible Waterproof Illuminated Switch:
Our beefy, completely sealed, waterproof switch was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. It's clever design can be either flush or bar mounted. 

DrySeal Submersible Waterproof Light Housings:
In addition to molded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed.  

Impact PC Corrosion-Proof Bezels:
Our Impact PC bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode even after taking repeated impacts from rocks and debris. 

LiveActive Intelligent Thermal Management:
DENALI 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most. 

Chrome Plated Optic Holders:
We take the extra step to chrome plate our optic holders to maximize reflectivity and refine the appearance match the original chrome reflectors of your vehicle headlights. 

Low-Profile Mount with Stainless Steel Hardware:
DENALI 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. 

Handlebar Switch Mount Included:
Our versatile switch design can be either flush, perch, or bar mounted to your vehicle. DENALI 2.0 light kits include a ?” and 1” handlebar mount to provide an integrated mounting location for the light switch right out of the box. 

E Mark Approved Lenses
DENALI 2.0 kits include E Mark approved lenses

 
D2 Kit Product Specs:

• LED's: (2x) 10 Watt Cree XPL HI
• Power Draw: 1.6 Amps
• Beam Distance (Spot): 525 Feet
• Beam Width (Spot): 75 Feet
• Raw Lumens: 2190
• Intensity: Single Intensity Harness
• DataDim Compatible: Yes 
• Operating Voltage: 12 VDC
• Pod Size:  2.2" Round x 2.4" Deep

D2 Kit Contents

• (2x) LED Light Pods
• (2x) Spot Lenses (Installed)
• (2x) E Mark Approved Elliptical Flood Lenses (Included)
• (1x) HotSwap Single Intensity Wiring Harness
• (1x) DrySeal Waterproof Illuminated Switch
• (1x) 7/8" inch Handlebar Switch Mount
• (1x) 1 inch Handlebar Switch Mount
• (2x) Hinge Mounts with M8 Stainless Steel Hardware
• (4x) Zip Ties & (1x) Adhesive Mounting Square

OEM Honda Front Indicator Cover RIGHT - CRF1000 (2016/17)