Each Mirror Kit contains the following:

• 1 x Double Take Adventure Mirror
• 1 x RAM Arm - choose either 3 inch or 5 1/4 inch
• 1 x RAM Ball with M10 x 1.25 pitch (Motorcycle Mirror Perch)
• 1 Base Extension
• 1 Reverse-Thread Adapter
• 1 BMW Adapter

THE ONLY MIRROR YOU WILL EVER NEED...

This brand new version of the incredibly successful Double Take Mirror made specifically for the Adventure Bikes that spend more time on the tarmac. Less vibration and more solid fixing to stop the mirror moving at high speed due to wind blast

• Virtually Indestructible- Made from reinforced Zytel
• Excellent visibility- SAE spec convex lens
• Easy to fold, remove, or swap between bikes
• Position Anywhere
• Protect Your Controls
• Mirror Dimensions = 135mm x 90mm (5.25" x 3.5")
• Arm length - choose either 3" or 5.3/4"
• Made in the USA

"This mirror is the product of much frustration- I spent years breaking other designs and wondering what was going on behind me on the road.

Last fall, when I dropped my bike and found myself buying two(!) new master cylinders as a result, and I decided it was time to make a really good mirror, one that would function well as a mirror, and also protect the bike (and me) from damage.

I had three goals for my design:

1. That it work as well as an OEM mirror for seeing what was going on behind
2. That it could fold completely out of the way, safe from giving or receiving damage when offroad and, 
3. That it be tough.

Ideally, it would even have some ability to give in a crash and prevent damage not only to the mirror, but also to the bike.

Many experiments later, the mirror for sale here is the result. The benefits of this system are many, but let me expound on a few:

• First, because there are two ball joints, you have the ability to position it exactly where you want it, both when extended for viewing, and also when folded away.

On most bikes, you can fold it perfectly along the handlebars, out of the way of any conceivable crash, and without blocking the view of the speedometer or GPS.

• Second, because there is adjustable tension, it is easy to position it and then lock it in place.

The system uses RAM-Mount components, which are well known for their durability and effectiveness.

• Third, the joints are stiff enough to hold the mirror at triple digit speeds, but will move if they are struck, which protects you from injury and your bike from damage.

I'm sure it is possible to break the mirror, but I haven't succeeded yet and I've tried pretty hard, going so far as to race an enduro with the mirror in place.

The body is made from 43% glass filled Zytel, which is really tough stuff.

Other benefits:

• Easy to remove the mirror entirely- just loosen the RAM arm, and remove it along with the mirror.
• Convex lens- we used SAE spec convex glass that provides a nicer field of view than a flat piece would, while retaining the ability to focus on details.  
• Universal fit- You can easily swap the mirrors between bikes.
• Can be positioned further out than a stock mirror, resulting in seeing more of what is behind you and less of your elbow.

The product meets each of the goals I started out with, and after thousands of miles of testing, has proven to be exactly what I was looking for all those years!"

Ned Suesse - designer

• Moves Bar 1 1/2" Up and 1" Back or Forward from the OEM position (can be installed facing either direction)
• Made in the USA
• Lifetime Warranty
• These Universal Barback Risers are designed to work on any bike with a stock 1 1/8" Fatbar, parallel OEM bar clamps, and open mounting area.
• Machined from 6061-T6 Aircraft Grade Billet Aluminum
• Engraved Rox logo for a clean and understated “factory” look
• Includes all mounting hardware and instructions (install video coming soon!)
• Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers.
• These risers come with (2) step shims that allow the risers to mount to an OEM step down triple clamp, similar to the Honda Africa Twin.

Available in 3 colours:

• Gun Metal Grey (Matte Finish)
• Black (Matte Finish)
• Machined Aluminium (Silver)

Infinitely adjustable allows you to get the perfect positioning on your handlebars whilst also offering a 44.5mm (1.3/4") rise - once you fit these you'll never go back to static risers!

• Lifetime Warranty
• Made in the USA
• 1.3/4" (44.5mm) Center-to-Center Rise
• Pivots Backward/Forward based on Rider Preference
• 1 1/8" Stem (28mm)
• Accepts 1 1/8" Handlebar (28mm)
• Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers!

Full range of adjustment allows the rider to find their own individual bar position.

Designed, Manufactured, and Assembled in the USA.

Make your machine fit YOU, not the other way around.

A more comfortable ride means a longer ride—and who doesn’t want that?

Patented by the US Patent and Trademark Office under US Patent #6,920,806.

Fitment

These risers will mount on essentially any machine that has a handlebar that measures 1 1/8" (28mm) at the bar clamps, has open mounting area, and has enough cable slack to accomodate the risers. 

Infinitely adjustable allows you to get the perfect positioning on your handlebars whilst also offering a 44.5mm (1.3/4") rise - once you fit these you'll never go back to static risers!

• Lifetime Warranty
• Made in the USA
• 1.3/4" (44.5mm) Center-to-Center Rise
• Pivots Backward/Forward based on Rider Preference
• 1 1/8" Stem (28mm)
• Accepts 1 1/8" Handlebar (28mm)
• Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers!

Full range of adjustment allows the rider to find their own individual bar position.

Designed, Manufactured, and Assembled in the USA.

Make your machine fit YOU, not the other way around.

A more comfortable ride means a longer ride—and who doesn’t want that?

Patented by the US Patent and Trademark Office under US Patent #6,920,806.

Fitment

These risers will mount on essentially any machine that has a handlebar that measures 1 1/8" (28mm) at the bar clamps, has open mounting area, and has enough cable slack to accomodate the risers. 

Allows the fitting of 120mm grip heater to 130mm handlebar.

OEM Yamaha Handlebar Risers

• Sold in pair, the handlebar risers increase the height of the handlebar with 20 mm.
• OEM quality and fitting

OEM Yamaha USB Power Socket 

Double USB power kit for pre-wired units

• Handlebar mount type USB DC outlet.
• Can mount together with your iPhone holder.

Please note that this socket is only suitable for 2019 and 2020 models.

Oxford Heated Grips - Premium ADVENTURE.

The grips have ergonomically engineered surface structures to optimise riding performance.

Thicker rubber in areas of maximum wear, rhombus tread pattern for vibration absorption, 5² block siped tread patterns for high levels of grip and fee, diamond tread pattern where maximum grip is required and waffle matrix for finger grip.

• 5 heat settings (30%, 40%, 50%, 75% and 100%) with LED lights to indicate heat setting)
• Battery saving mode (turns grips off if you forget or if battery voltage falls too low)
• Switch technology (raised and tactile silicone buttons for use with gloved hands)
• Rainproof switch
• Draws under 4A
• Length: 132mm (can be trimmed to 122mm if required)
• Can be fitted in conjunction with Barkbusters Handguards

Includes:

• 2 x Hotgrips
• 1 x intelligent heat control
• 1 x metal bracket and fittings for mounting the heat controller
• 1 x wiring loom, cable ties and grip glue
• 1 x instruction booklet and warranty form 

Renew the levers of your Tenere 700 with the new PUIG 3.0 Short levers. 

PUIG has emphasized on the ergonomic improvement of the piece and improved the look of the levers to bring a more modern and aggressive touch to the bike.

The new shape of the levers allows for a perfect handle, that will guarantee greater grip and accessibility, making the riding experience more unique.
Regarding the new looks, PUIG has renewed all the graphics on each lever.

PUIG has focused his improvement efforts on this latest model, where it has managed to modify the ergonomics to ensure that the fingers will work comfortably.

As for the assembly of these, the levers are delivered with detailed instructions and do not require modification of your motorcycle. 

Puig 3.0 handles have the TÜV certificate and has the German approval ABE 91294.

Each set contains:

• Puig Short Brake Lever with mounting adaptor
• Puig Short Clutch Lever with mounting adaptor

Puig Brake Lever Adapter for Yamaha Tenere 700
 

Puig Clutch Lever Adapter for Yamaha Tenere 700

Renew the levers of your Tenere 700 with the new PUIG 3.0 Short levers. 

PUIG has emphasized on the ergonomic improvement of the piece and improved the look of the levers to bring a more modern and aggressive touch to the bike.

The new shape of the levers allows for a perfect handle, that will guarantee greater grip and accessibility, making the riding experience more unique.
Regarding the new looks, PUIG has renewed all the graphics on each lever.

PUIG has focused his improvement efforts on this latest model, where it has managed to modify the ergonomics to ensure that the fingers will work comfortably.

As for the assembly of these, the levers are delivered with detailed instructions and do not require modification of your motorcycle. 

Puig 3.0 handles have the TÜV certificate and has the German approval ABE 91294.

Each set contains:

• Puig Short Brake Lever with mounting adaptor
• Puig Short Clutch Lever with mounting adaptor

Puig Brake Lever Adapter for Yamaha Tenere 700
 

Puig Clutch Lever Adapter for Yamaha Tenere 700