OEM Honda Sumitomo Mini Fuse Puller - CRF1000 (2016>)

Changing a tyre is hard enough without having to worry about damaging the wheel. Traditional wheel protectors are good insurance, but can be a pain to use. They are hard to keep in place, difficult to manipulate from one position to another, and they tend to get pulled inside the tire at the end of the job leaving you struggling to fish them out before airing up the tyre.

The new improved patented Motion Pro RimShield II™ now made with genuine DuPont Zytel, a super tough nylon resin offer unmatched strength and durability.

The RimShield II™ provides excellent protection to the rim of the wheel and features a large flat area that extends towards the hub of the wheel to protect the spokes and inner part of the wheel, also providing a working platform for your tyre levers. It features raised ridges on either side of the tool which hold the bead of the tyre up, making it much easier to insert tyre levers under the bead of the tyre. The extension part of the RimShield II™ also has two finger holes to make repositioning fast and easy and allows the RimShield II™ to be easily removed at the end of the installation process.

The RimShield II™ is the perfect tool for changing tyres on that special wheel that just can’t have any scratches and also makes changing tyres a lot easier

• New and improved version of original Rim Shield
• Now made with genuine DuPont Zytel Super Tough nylon resin for unmatched strength and durability
• Prevents rim damage from tire levers during tire changes
• Dual raised beads facilitate inserting tire lever under tire bead and prevents tire lever from slipping
• Won't mar wheels
• Finger holes make it easy to insert and remove
• Long apron protects hands and spokes
• Patented design
• Sold in set of 2

Corrosion Block Grease has the same corrosion protection properties as ACF-50 but in grease form. Can be used as an assembly grease (for example did you know that the copper in copper grease corrodes alloy?) so use this for such things as engine/transmission cases, caliper bolts, wheel bearings, wheel axle bolts (which always seem to corrode), battery terminals, side and centre stands, foot pegs, brake and clutch lever pivots, etc. etc.

Corrosion Block is an anti-corrosion compound developed exclusively to stop existing corrosion and prevent new. It is unique in that it is designed for use in electrics and electronics as well as metals and structures. This makes this product essential for your day-to-day routine maintenance and as long-term asset protection for your boat/equipment within the harsh marine environment.

What will it actually do? It will, with regular applications, make maintenance easier and save you money, easier to clean, look better, help prevent surface/structural/electrical corrosion related failure thereby increasing reliability and it will increase the bike’s value. It will significantly reduce your replacement, repair and labour expenses. That’s what it will actually do!

The Facts:
• KILLS existing corrosion
• PREVENTS new from forming
• Long lasting LUBRICANT
• APPROVED for ELECTRONICS
• Non-Toxic & Environmentally Friendly

Where to use it

Corrosion Block is simply applied to the structure, joints and welds, i.e. under hidden areas, where the corrosion works away un-noticed, under panels and on hidden parts of the engine, gear boxes, generators, switch panels and avionics, especially on outboard engines where it will work hard to prevent corrosion and structural degeneration. Where corrosion is already evident it will help inhibit further progress by insulating and electrically ‘switching off’ the corrosion cell. It will also penetrate around bolts, screws and hardware, protecting them from electrolytic corrosion and preventing seizure.

It will protect electrical joints, plugs and components and prevent corrosion causing high resistance joints. This goes for PCB’s and electronics as well, such as computerised ignition and fuel control units and their multi pin plugs, radio’s, radar and antenna’s, while switches, controls and levers will all be lubricated as well as protected from corrosion. It does not affect the working of electrical or electronic components however keep it off LCD’s. Multi pin plugs and connectors benefit from having Corrosion Block applied directly to the contacts. Corrosion Block has restored many a failed electronic/electrical component. It’s uses are unending, you will love it!

ACF-50 is one of the best inventions for protecting your bike against road salt and grime. There are many aerosol cans available but we use the refillable pump action spray bottle when treating our bikes. This means you can get the ACF-50 where you want it much more accurately and you aren't wasting any spraying it all over the place. We prefer the ACF-50 as you don't need to keep reapplying it over the winter months.

What's included in the price:
- 1 quart bottle of ACF-50 (that's just under a litre).
- A refillable pump action spray bottle.
- Full usage instructions.

What is it? ACF-50 (Anti-Corrosion Formula) is an aerospace product that is now available to motorcyclists. Its aviation approval is MIL-SPEC 81309 Type II and III, which means it is approved for ferrous and non-ferrous metals, electrical systems and electronic components.

It is a VERY sophisticated type of ‘thin film’ water displacement product designed as a corrosion prevention and inhibiting compound for the harsh environmental conditions associated with aircraft operation with the added advantage that it will stop existing corrosion and is slow to deteriorate (it has a 12 to 18 month active life). It is also a very efficient penetrant without loosening structural attachments (a bit disastrous on an aircraft or motorcycle) and an excellent lubricant without having any high-pressure (HP) lubricants, wax, silicon or Teflon additives (which actually seal in moisture thereby aggravating and perpetuating the corrosion process). It is ‘pro-active’, neither passive nor waxy, is compatible with most plastics and rubbers is EXTREMELY ECONOMICAL IN USE - AND CONTAINS NO WATER.

Its uses on motorcycles are very similar to those on aircraft. Sprayed into the structure, joints and welds i.e. under the tank and seat, frame and steering head area (where the corrosion works away un-noticed), under panels and on hidden parts of the engine, radiators, engine cases, forks, calipers, wheels, anywhere on the bike really because it will work hard to prevent corrosion and structural degeneration. Where corrosion is already evident it will help inhibit further progress by insulating and electrically ‘switching off’ the corrosion cell. It will also penetrate around bolts, screws and hardware protecting them and preventing seizure.

Exposed engine and gearbox cases, swinging arms, forks and other exposed parts will benefit from ACF-50’s thin film technology by not corroding, will stay looking good and will clean up easily after a salt laden ride. It is also excellent on black plastic trim without leaving the residue of silicon.

It will protect electrical joints, plugs and components and prevent corrosion causing high resistance joints. This goes for PCB’s and electronics as well, such as computerised ignition and fuel control units and their multi pin plugs, while switches, controls and levers will all be lubricated as well as protected from corrosion. Multi pin plugs and connectors benefit from having ACF-50 applied directly to the contacts.

What will it actually do? It will, with regular applications; make maintenance easier and save you money, make the bike easier to clean, look better, help prevent surface/structural/electrical corrosion related failure thereby increasing reliability and it will increase the bike’s value. That’s what it will actually do!

How to use it! Being designed for aircraft it has a non-flammable propellant so when cold it sprays like shaving foam.

• Keep the tin warm and shake it really well before use to activate the propellant.
• Give the area the lightest coating/spray you can, enough so that when it creeps it will cover all.
• It really does creep, so caution with calipers or it will creep on to the pads.
• Also use a rag and spread it over the areas sprayed, the rag gets impregnated and then spreads it further.
• Under the tank and hidden areas it will last up to a year, (at least a year in plugs and switches).
• Exposed areas such as forks, the front of the engine, wheels and calipers; I just re-treat as necessary.
• You can tell if it is still active because any water will ‘bead’ on contact.

ACF-50 is one of the best inventions for protecting your bike against road salt and grime. 

What is it? ACF-50 (Anti-Corrosion Formula) is an aerospace product that is now available to motorcyclists. Its aviation approval is MIL-SPEC 81309 Type II and III, which means it is approved for ferrous and non-ferrous metals, electrical systems and electronic components.

It is a VERY sophisticated type of ‘thin film’ water displacement product designed as a corrosion prevention and inhibiting compound for the harsh environmental conditions associated with aircraft operation with the added advantage that it will stop existing corrosion and is slow to deteriorate (it has a 12 to 18 month active life). It is also a very efficient penetrant without loosening structural attachments (a bit disastrous on an aircraft or motorcycle) and an excellent lubricant without having any high-pressure (HP) lubricants, wax, silicon or Teflon additives (which actually seal in moisture thereby aggravating and perpetuating the corrosion process). It is ‘pro-active’, neither passive nor waxy, is compatible with most plastics and rubbers is EXTREMELY ECONOMICAL IN USE - AND CONTAINS NO WATER.

Its uses on motorcycles are very similar to those on aircraft. Sprayed into the structure, joints and welds i.e. under the tank and seat, frame and steering head area (where the corrosion works away un-noticed), under panels and on hidden parts of the engine, radiators, engine cases, forks, calipers, wheels, anywhere on the bike really because it will work hard to prevent corrosion and structural degeneration. Where corrosion is already evident it will help inhibit further progress by insulating and electrically ‘switching off’ the corrosion cell. It will also penetrate around bolts, screws and hardware protecting them and preventing seizure.

Exposed engine and gearbox cases, swinging arms, forks and other exposed parts will benefit from ACF-50’s thin film technology by not corroding, will stay looking good and will clean up easily after a salt laden ride. It is also excellent on black plastic trim without leaving the residue of silicon.

It will protect electrical joints, plugs and components and prevent corrosion causing high resistance joints. This goes for PCB’s and electronics as well, such as computerised ignition and fuel control units and their multi pin plugs, while switches, controls and levers will all be lubricated as well as protected from corrosion. Multi pin plugs and connectors benefit from having ACF-50 applied directly to the contacts.

What will it actually do? It will, with regular applications; make maintenance easier and save you money, make the bike easier to clean, look better, help prevent surface/structural/electrical corrosion related failure thereby increasing reliability and it will increase the bike’s value. That’s what it will actually do!

How to use it! Being designed for aircraft it has a non-flammable propellant so when cold it sprays like shaving foam.

• Keep the tin warm and shake it really well before use to activate the propellant.
• Give the area the lightest coating/spray you can, enough so that when it creeps it will cover all.
• It really does creep, so caution with calipers or it will creep on to the pads.
• Also use a rag and spread it over the areas sprayed, the rag gets impregnated and then spreads it further.
• Under the tank and hidden areas it will last up to a year, (at least a year in plugs and switches).
• Exposed areas such as forks, the front of the engine, wheels and calipers; I just re-treat as necessary.
• You can tell if it is still active because any water will ‘bead’ on contact.

Corrosion Block Grease has the same corrosion protection properties as ACF-50 but in grease form. Can be used as an assembly grease (for example did you know that the copper in copper grease corrodes alloy?) so use this for such things as engine/transmission cases, caliper bolts, wheel bearings, wheel axle bolts (which always seem to corrode), battery terminals, side and centre stands, foot pegs, brake and clutch lever pivots, etc. etc.

Corrosion Block is an anti-corrosion compound developed exclusively to stop existing corrosion and prevent new. It is unique in that it is designed for use in electrics and electronics as well as metals and structures. This makes this product essential for your day-to-day routine maintenance and as long-term asset protection for your boat/equipment within the harsh marine environment.

What will it actually do? It will, with regular applications, make maintenance easier and save you money, easier to clean, look better, help prevent surface/structural/electrical corrosion related failure thereby increasing reliability and it will increase the bike’s value. It will significantly reduce your replacement, repair and labour expenses. That’s what it will actually do!

The Facts:
• KILLS existing corrosion
• PREVENTS new from forming
• Long lasting LUBRICANT
• APPROVED for ELECTRONICS
• Non-Toxic & Environmentally Friendly

Where to use it

Corrosion Block is simply applied to the structure, joints and welds, i.e. under hidden areas, where the corrosion works away un-noticed, under panels and on hidden parts of the engine, gear boxes, generators, switch panels and avionics, especially on outboard engines where it will work hard to prevent corrosion and structural degeneration. Where corrosion is already evident it will help inhibit further progress by insulating and electrically ‘switching off’ the corrosion cell. It will also penetrate around bolts, screws and hardware, protecting them from electrolytic corrosion and preventing seizure.

It will protect electrical joints, plugs and components and prevent corrosion causing high resistance joints. This goes for PCB’s and electronics as well, such as computerised ignition and fuel control units and their multi pin plugs, radio’s, radar and antenna’s, while switches, controls and levers will all be lubricated as well as protected from corrosion. It does not affect the working of electrical or electronic components however keep it off LCD’s. Multi pin plugs and connectors benefit from having Corrosion Block applied directly to the contacts. Corrosion Block has restored many a failed electronic/electrical component. It’s uses are unending, you will love it!

Rocky Creek Designs strives to manufacture motorcycle accessories which appeal and are “different”, creating a “must have” for motorcyclists all over the world!

This is a great little pump. ULTRA compact, this stripped down pocket pump weighs in at only 345g and fits in the palm of your hand. Built around a custom modified 12 volt inflator. What it lacks in looks, it makes up for in performance and functionality – which is what you really need when you’re stranded in the middle of nowhere.

Our Pocket Pump has proved to be an efficient “pocket sized” pump since 2013 up until 2023. No changes had to be made to the pump during the 10 years the Pocket Pump has been on the market and we are very proud that this is now a worldwide success.

To continue the success of the pump, we decided to change it up a little, and have “finally” put a cover on it! Because technology has changed quite a lot in the last 10 years, we have also managed to make the pump SMALLER (100 x 74 x 37mm) in size and half the weight of it (345g).

It still pumps over 130 psi and will inflate a 150/70 R18 tyre from 0 to 31psi in 3 minutes!!

There is a built-in “checking valve” on the pump so you can attach your pressure gauge to the valve and check the tyre pressure at any time.

Comes with a 185mm inflation hose, 2m long power cord with SAE connector, alligator clips with SAE connector and a top quality zippered EVA bag.

New from Australia, simply the best performance and compact design inflation pump we’ve seen! Check out the video below… how many compact pumps have you seen blow a tyre back on it’s bead???

• 1 x Dynaplug® Carbon Ultralite
• 3 x Tubeless tyre repair plugs
• 1 x Insertion tube
• 1 x Pipe cleaner

• Tool Body Construction Glass Filled Nylon / 6061 Aluminum Threaded Insert / Silicone Cap
• Dimensions 5.42” x .875”
• Weight
• 1.2oz (34g).
• Insertion Tube Hardened 305 Stainless Steel
• Plug Material Viscoelastic Impregnated Rubber
• Plug Tip Nonabrasive Brass
• Warranty Limited Lifetime

• 55cm cable length
• M6 eyelets to fit battery terminals perfectly
• 15A fuse
• Splash and dust proof (IP65)

Bruhl MD1400 Single Turbine Dryer

Avoid potential corrosion - Get the dryer made specifically for outdoor use on your motorcycle.

Riding all year round means frequent washing to keep corrosion at bay so the Bruhl air dryer is a huge bonus as it means you can cut down on the time it takes to keep your bike clean. 

The dryer blasts out air at 60 metres per second so you can really get into the hidden parts of the bike.

Blasting the water out of bike means no water spotting or staining so your bike can be put away almost completely dry.

The hose is long enough and stretchy enough to make moving around the bike easy.

You can now put your bike away completely dry and maintain its value by keeping corrosion under control. 

Product Specifications: 

• Model: MD1400 
• Single Turbine, no assisted heat.
• Voltage: AC 220-240V, 50HZ 
• Turbine Power: 1400W
• Hose Length When Extended: 3 Metres 
• Hose Length When Retracted: 1.5 Metres
• CE Approved
• Low Noise
• Carry Handle
• Rubber Mounted Anti-Vibration Feet
• Robust Construction
• Size - L36cm x H20cm x W16cm
• Wind Speed - 60mtr/sec
• Weight - 3Kg

• BRUHL MD1400 Dryer (fitted with UK 3 Pin Plug)
• Flexible Expanding Hose from 1.5mtr to 3.0mtr
• 3 nozzles
• Instructions