• Model: MD1900+ 
• Single Turbine, with assisted heat.
• Switchable Heat Function 500W
• Voltage: AC 220-240V, 50HZ 
• Turbine Power: 1400W
• Hose Length When Extended: 3 Metres 
• Hose Length When Retracted: 1.5 Metres
• CE Approved
• Low Noise
• Carry Handle
• Rubber Mounted Anti-Vibration Feet
• Robust Construction
• Size - L36cm x H20cm x W16cm
• Wind Speed - 60mtr/sec
• Weight - 3Kg

• BRUHL MD1900+ Dryer (fitted with UK 3Pin Plug)
• Flexible Expanding Hose from 1.5mtr to 3.0mtr
• 3 nozzles
• Instructions

• Quantity required - 4

• Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties
• Corrugated Ribs Prevent Flashover
• Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer
• Copper Core Aids in Heat Removal
• Triple Seals Prevent Leakage

Shell

• Thread Size: 10mm
• Seat Type: Gasket
• Resistor: Yes
• Resistor Value: 5k ohm
• Reach: 26.5mm (1.04")
• Hex Size: 9/16" (14mm)
• Gap: 0.036"
• Heat Range: 8

• Material: Iridium

• Type: Taper Cut
• Quantity: 1

• The highly elastic material perfectly follows your bike's contours. 
• Breathable, Ultra-soft, close-fitting and paint-friendly, this cover completely surrounds and protects your bike. 
• Perfectly held in place by the elasticated material, with an additional elastic cord running all the way around the base of the cover, leaving no chance for dust and dirt to land on your pride and joy. 
• Bright Red in colour with a contrasting Black stripe across the top.
• Perfect fit for all large capacity Dual Sport bikes, even with panniers fitted

• Length: 228 cm
• Width: 99 cm
• Height: 124 cm

• Allows you to measure suspension sag by yourself easily.
• Compact design, it does not take much space in your tool box.
• Measure front and rear suspension sag easily with this kit.
• Clamp comes with rubber and will not damage your plastic fenders or side panels.
• Clamp anywhere on side panels, rear fender or sub frames, to measure suspension sag.

• Can be used to remove 8, 10, 12 & 14mm bolts, #2 & #3 Phillips screws,small & medium straight-slot screws and 5 & 6mm Allen bolts
• Includes a 1/4 in. & 3/8 in. socket driver
• 10mm & 12mm 1/4 in. drive sockets included
• Enhance it by adding your own 1/4 in. or 3/8 in. drive socket attachments
• Includes convenient carrying case
• Hard nickel pewter finish
• Replacement bits available separately

• Magnetic drain bolt designed to pick up excess bits of metal in your engine oil.
• Made of A7009-T6 aluminium. Light weight design.
• Press fit magnet on the drain plugs.
• Includes safety wire holes to prevent un-intentional unscrewing .
• Anodised red

​Suitable replacement for all models of CRF1000 Africa Twin, and CRF1000 Adventure Sport

The Scottoiler xSystem is the easiest to install and most user friendly chain oiler yet. The revolutionary design makes the xSystem super compact whilst providing optimal chain lubrication. The new Scottoiler xSystem is perfect for your modern commuter or tourer, looking for a discreet solution to chain maintenance.

OEM Honda Handgrip Glue - 23g tube. Part number 08CRD-HGC23GHO

Unique rubber and PVC adhesive formulated exclusively for Honda
Required to install all Genuine handgrips
Long lasting extra-strong adhesion: Resists moisture
Also adheres footpeg, gearshift and Kick starter rubbers
cure time: 6 hours

• Compatible with most forks
• Made of aluminium, anodised finish with laser printed logo
• Using the principle of leverage, the fork seal removal tool makes removing fork seals easy.
• Won’t scratch your front fork body.

• 43mm - XRV650/750, BMW F650/700/800GS)
• 45mm - CRF1000
• 48mm - KTM Adventure

• Specially designed fork seal driving tools for front forks.
• Comes with 5 different size plastic adapter can be used for most conventional and up side down front forks.
  • 40/41,
  • 42/43,
  • 45/46,
  • 47/48,
  • 49/50
• Flange shape design of steel body for less power and accurate operation.