This is a complete Plug and Play Denali Dual Intensity LED Light Kit with the OEM Honda Fog Light Switch already built into the loom.

The kit contains the following

• 1 x OEM Honda Fog Light Switch
• 2 x Denali D4 LED Dual Intensity Light Pods
• 1 x Denali DataDim Dual Intensity Controller Module
• 1 x Plug and Play Wiring Loom

This means that there is no cutting or tapping into the existing wiring on your CRF1000 or CRF1000 Adventure Sport - you just plug this kit into existing connectors that are already in your bike's wiring loom.

The loom also has a connector allowing the fitment of the OEM Honda Auxilliary Power Socket as well or power a GPS.

• Engine Running / Fog Light Switch OFF / Denali Lights OFF
• Engine Running / Fog Light Switch ON / Denali Lights on at 50% DRL level
• Engine Running / Fog Light Switch ON / Main Beam ON (or flasher switch pressed) / Denali Lights on at 100%

Very neat install with no excess loom to try and find space for - specifically manufactured for the Honda CRF1000 Afria TWin and Adventure Sport.

Fits all models of CRF1000 Africa Twin, and CRF1000 Adventure Sport.

DENALI DR4 2.0 LED TriOptic™ LED light

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile.

The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit.

Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can switch between half and full intensity with your vehicle's original high beam switch.

Our DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up. 

 
DENALI 2.0 Features 

• HiDrive High-Intensity Cree LED's 
• TriOptic Multi-Beam Lens System 
• DataDim LED Dimming Technology 
• HotSwap Modular Wiring Harness System
• DrySeal Submersible Waterproof Light Housings 
• Impact PC Corrosion-Proof Bezels
• LiveActive Intelligent Thermal Management
• Chrome Plated Optic Holders
• Low-Profile Mount with Stainless Steel Hardware
• E Mark Lenses Included

Features Explained:

HiDrive High-Intensity 10 Watt LED's:
2.0 lights feature the latest development from Cree; a new Hi-Intensity LED chip that features a redesigned primary optic to maximize light output through secondary optics. The “HI” series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw.  

TriOptic Multi-Beam Lens System:
2.0 Light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. 

Data Dim LED Dimming Technology:
All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.   Plug in our DataDim Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. 

Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming.     

DrySeal Submersible Waterproof Light Housings:
In addition to molded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed.  

Impact PC Corrosion-Proof Bezels:
Our Impact PC bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode even after taking repeated impacts from rocks and debris. 

LiveActive Intelligent Thermal Management:
DENALI 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most. 

Chrome Plated Optic Holders:
We take the extra step to chrome plate our optic holders to maximize reflectivity and refine the appearance match the original chrome reflectors of your vehicle headlights. 

Low-Profile Mount with Stainless Steel Hardware:
DENALI 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. 

E Mark Approved Lenses
DENALI 2.0 kits include E Mark approved lenses

This is a complete Plug and Play Denali Dual Intensity LED Light Kit with the OEM Honda Fog Light Switch already built into the loom.

The kit contains the following

• 1 x OEM Honda Fog Light Switch
• 2 x Denali S4 LED Dual Intensity Light Pods
• 1 x Denali DataDim Dual Intensity Controller Module
• 1 x Plug and Play Wiring Loom

This means that there is no cutting or tapping into the existing wiring on your CRF1000 or CRF1000 Adventure Sport - you just plug this kit into existing connectors that are already in your bike's wiring loom.

The loom also has a connector allowing the fitment of the OEM Honda Auxilliary Power Socket as well or power a GPS.

• Engine Running / Fog Light Switch OFF / Denali Lights OFF
• Engine Running / Fog Light Switch ON / Denali Lights on at 50% DRL level
• Engine Running / Fog Light Switch ON / Main Beam ON (or flasher switch pressed) / Denali Lights on at 100%

Very neat install with no excess loom to try and find space for - specifically manufactured for the Honda CRF1000 Afria TWin and Adventure Sport.

Fits all models of CRF1000 Africa Twin, and CRF1000 Adventure Sport.

DENALI S4 2.0 TriOptic™ LED Light Pods

Easy and inexpensive Plug-N-Play Wiring Harness for DENALI SoundBomb Compact & DENALI SoundBomb Split Horns.

Does not require any cutting, soldering, slicing or crimping as long as the original horn has blade-style electrical connections. 

Features

• No cutting, soldering or crimping for application with blade style horn connections
• Extra connections for custom applications
• 5.5ft harness length
• 30 amp Mini in-line fuse
• Inline relay socket
• Protective vinyl sheath
• Weather resistant

Installation Note:  A 5-Pin relay is NOT included with this kit as one is already provided in the box when you purchase a DENALI SoundBomb Compact or Split horn.

What's In The Box?

• (x1) SoundBomb Horn Wiring Harness
• (x2) Posi-tap inline wire connectors for custom applications
• (x2) Male spade crimp on connectors for custom applications
• (x2) Female spade crimp on connectors for custom applications
• (x4) Wire zip ties
• (x1) 30amp Mini ATM Fuse

KTM Motorcycle Note: The CAN bus system on most KTM motorcycles does not allow the OEM horn to be removed. Its required that you leave the OEM horn connecteed to prevent failure lights from appearing on the dash.

BMW Motorcycle Note: All modern BMW motorcycles use a specialty connector at the OEM horn connection. A DENALI Horn Wiring Adapter is necessary for plug-n-play connection with BMW Motorcycles and is available for purchase HERE.

Automotive Note: Many modern vehicles use a specialty connector at the OEM horn connection. If your vehicle uses a specialty connector use the included spade connector or posi-tap connectors to make the connection.

KTM CANsmart™ Controller - GEN II

Our ground-breaking CANsmart™ Controller provides plug-n-play installation of up to four accessories to enable dozens of customizable settings that can be controlled right from your vehicles original switches or our Accessory Manager Software.

4 Accessory Circuits, Over 35 Custom Features and Settings

Simply connect the CANsmart™ Controller to your KTM diagnostic port to access over 35 programmable accessory settings designed to control auxiliary lights, turn signals, horns, brake lights, or any accessory you can imagine. 

Control OEM accessories, 3rd party accessories or use the included wiring harnesses for plug & play connection to DENALI driving lights, DRLs, SoundBomb Horns and B6 Brake Lights.

Harness the flexibility and intelligence of your KTM motorcycle's CAN bus electrical system to make installation of accessories drastically easier with the new and improved DENALI CANsmart™ Controller GEN II.

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the KTM's existing handlebar switches, the optional KTM CANsmart Control Switch or the CANsmart™ Accessory Manager Software. 

The CANsmart's four circuits are preprogrammed to connect and independently control two sets of DENALI lights, a SoundBomb horn, and our B6 auxiliary brake light.  

Gen II - More Features, More Power, More Versatile

Unlike the Gen I CANsmart, all four circuits of the Gen II can provide a full 10 amps of continuous power and each circuit can be configured to run any accessory type. The maximum power draw for the whole unit remains at 30 amps continuous. The Gen II also features two new auxiliary light settings. You can now modulate your auxiliary lights for added conspicuity, and set your left and right side lights to independently cancel when you activate your corresponding turn signal. 

Integrated Accessory Control

Control up to two sets of LED lights right from your KTM's SET button. Simply toggle your DRLs on/off twice to turn you auxiliary lights on or off.

On The Fly Dimming

For increased customization while riding add our plug-n-play dimmer switch to independently dim two sets of lights without having to connect to the software. DNL.WHS.13100 SOLD SEPERATELY

CANsmart Accessory Manager Software

Our free Accessory Manager Software lets you set each of the four circuits to control what ever accessory type you want. Once selected, you can choose between dozens of features and settings to customize each accessory type to match your riding style. You can also set each circuits electronic fuses which, if tripped, will automatically reset with a cycle of the ignition. 

CANsmart™ Accessory Manager 

Windows Download (v1910.2 - Released 10/23/19)

Mac Download (v1910.2 - Released 10/23/19)

• High/Low Sync - Set auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
• ON/OFF and Dim - Independently control two sets of lights ON/OFF right from your original vehicle switches. Brightness can be adjusted using the software or the optional control switch.
• Modulate Lights - Set auxiliary lights to modulate to increase your visibility to other motorists.
• Flash to Pass - Need to get someone's attention? Pulse your high beam switch three times and your auxiliary lights will strobe three times fast.
• Cancel With Turn Signal - This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal.
• Inverse Flashing With Hazards - This features flashes your auxiliary lights inversely to your hazard lights, increasing visibility during roadside emergency's. 
• Plug & Play Horn Installation - Quickly and easily connect high power aftermarket horns like our SoundBomb™ without having to add an additional harness or relay.
• Strobe with Horn - With this feature selected the CANsmart™ software will automatically strobe your auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBomb™ horn installed.
• Deceleration Activated "Smart Brake" Technology - The CANsmart™ reads vehicle speed in real-time to activate your brake light during deceleration before you even touch the brake. You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate.
• Flash Pattern Braking - The CANsmart™ provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set auxiliary brake lights to only flash under hard braking, flash continuously as your brake is applied or flash four times rapidly then hold steady.
• Circuit Function Selector - The Circuit Function Selector in the CANsmart software will let you run any accessory of your choice on any of the four circuits. Click on a circuit icon to open the drop-down menu and make your selection from the list of available circuit functions.
• Switched Power Source - The CANsmart™ provides a universal "accessory" option which simply gives you clean switched 12V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition.
• Delay Time Out - You can also set the accessories on this circuit to have a delayed time out. This will keep them powered for up to 30 seconds after your turn off your bike.
• On Board Power - The "accessory" circuit option is ideal for powering your GPS, phone, heated gear or any other electronic device.

Plug & Play Accessory Harnesses Included

In addition to the CANsmart™ controller, our kit includes four additional wiring harnesses that enable plug & play connection of two sets of auxiliary lights, SoundBomb™ horns and auxiliary brake lights. 

What’s In The Box?

• CANsmart™ Controller
• (x2) 5.5ft Light Extension Cables
• 5ft SoundBomb Horn Extension Cable
• B6 Brake Light Wiring Adapter
• Zip-ties
• Adhesive Hook-and-Loop Fastener
• Micro USB Programming Cable

Fits KTM Duke & Adventure Models

The KTM CANsmart™ Controller is compatible with the following KTM models: 

• KTM 1290 Super Duke R  2017-2020
• KTM 1290 Super Duke R  2014-2016
• KTM 1290 Super Duke GT 2017-2020
• KTM 1290 Super Adventure S 2017-2020
• KTM 1290 Super Adventure R 2017-2020
• KTM 1290 Super Adventure 2015-2017
• KTM 1190 Adventure R  2013-2016
• KTM 1190 Adventure 2013-2016
• KTM 1090 Adventure R 2017-2019
• KTM 1050 Adventure 2015-2017
• KTM 790 Duke 2018-2020*
• KTM 790 Adventure R 2019-2020*
• KTM 790 Adventure 2019-2020*

*NOTE: The KTM 790 series motorcycles use a different ECU and are only partially supported. The brake light and turn signal functions are not available for 790 models, but controlling auxiliary lighting, horns and other accessories is supported. 

Instruction Manual Download

PDF Instruction Manual (English)

The D2 light was designed to create an impressive beam of light that is the perfect balance between night time distance and daytime conspicuity. 

D2 Pod Features

• High-Intensity Series Cree LEDs outputting 1095 lumens per pod
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included
• Additional E-Mark Approved flood lens included
• Amber lenses available (sold separately) DNL.D2.10100

D2 Pod Specs

• LED: (x1) 10 Watt Cree XPL HI
• Power Draw: 0.8 Amps
• Raw Lumens: 1095
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 2.2” Round x 2.4” Deep
• Pod Weight: 0.6 lbs
• IP67 Waterproof & Submersible
• E Mark Approved Flood Lens

D2 Pod - What’s In The Box?

• (1x) LED Light Pod
• (1x) Spot Lenses (Installed) 
• (1x) E-Mark Approved Elliptical Flood Lenses (Included) 
• (1x) Hinge Mount with M8 Stainless Steel Hardware 
• (1x) Wiring Pigtail 

The DM was designed to concentrate all 1095 lumens into a small optic to create a super compact light that is incredibly bright to look at. These lights are the ideal solution for daytime visibility but will still outshine your typical high beam. 

DM Pod Features

• High-Intensity Series Cree LEDs outputting 1095 lumens per pod 
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments 
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels. 
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating 
• Low profile mounting bracket with stainless steel hardware included 
• Additional E-Mark Approved flood lens included 
• Amber lenses available (sold separately) DNL.DM.10100 

DM Pod Specs

• LED: (1x) 10 Watt Cree XPL HI 
• Power Draw: 0.8 Amps 
• Raw Lumens: 1095
• DataDim™ Compatible: Yes 
• Operating Voltage: 12 VDC 
• Pod Size: 1.7” Round x 2.4” Deep 
• Pod Weight: 0.5 lbs
• IP67 Waterproof & Submersible
• E Mark Approved Flood Lens 

DM Pod - What’s in the Box?

• (1x) LED Light Pods 
• (1x) Spot Lenses (Installed) 
• (1x) E-Mark Approved Elliptical Flood Lenses (Included) 
• (1x) Hinge Mounts with M8 Stainless Steel Hardware 
• (1x) Wiring Pigtail

Simply put; the DENALI D4 is a beast. It is DENALI’s most powerful light packing the punch of 4380 lumens in an aggressively styled housing.

The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing.

The included spot lens throws a massive beam of light and carries an official E-Mark certification. 

D4 Pod Features

• High-Intensity Series Cree LEDs outputting 4380 lumens per pod
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments 
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating 
• Low profile mounting bracket with stainless steel hardware included 
• Additional E-Mark Approved flood lens included 
• Amber lenses available (sold separately) DNL.D4.10100 

D4 Pod Specs

• LED’s: (4x) 10 Watt Cree XPL HI 
• Power Draw: 3.3 Amps 
• Raw Lumens: 4380 
• DataDim™ Compatible: Yes 
• Operating Voltage: 12 VDC 
• Pod Size: 3.9” Square x 2.6” Deep 
• Pod Weight: 1.55 lbs
• IP67 Waterproof & Submersible 
• E Mark Approved Spot Lens 

D4 Pod - What’s In The Box?

• (1x) LED Light Pods 
• (1x) True-Hybrid™ Lenses (Installed) 
• (1x) E-Mark Approved Spot Lenses (included) 
• (1x) Hinge Mounts with M8 Stainless Steel Hardware 
• (1x) Wiring Pigtail 

The DR1 is ideal for night riding conditions where maximum beam distance is desired.

The included pair of True-Hybrid™ lenses carry an official E-Mark certification and create a more balanced combination of distance and width. 

DR1 Pod Features

• High-Intensity Series Cree LEDs outputting 1095 lumens per pod. 
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments 
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels. 
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating 
• Low profile mounting bracket with stainless steel hardware included 
• Additional E-Mark Approved flood lens included 
• Amber lenses available (sold separately) DNL.DR1.10100

DR1 Pod Specs

• LED’s: (1x)10 Watt Cree XPL HI 
• Power Draw: 0.8 Amps 
• Raw Lumens: 1095
• DataDim™ Compatible: Yes 
• Operating Voltage: 12 VDC 
• Pod Size: 3.7” Round x 3.8” Deep 
• Pod Weight: 1.45 lbs
• IP67 Waterproof & Submersible
• E Mark Approved Hybrid Lens

DR1 Pod - What’s In The Box?

• (1x) LED Light Pods 
• (1x) Spot Lenses (Installed) 
• (1x) E-Mark Approved True-Hybrid™ Lenses (Included) 
• (1x) Hinge Mounts with M8 Stainless Steel Hardware 
• (1x) Wiring Pigtail

At over 7,500 lumens, the DENALI D7 light pod is one of the brightest LED lights under 4.5 inches period.

The light pod features seven high-intensity 10 watt LEDs that are focused through a proprietary single piece optic that was specifically engineered to create a full bodied spot beam that can reach over 1200 feet at one lux.

The robust heatsink and Active Thermal Management™ work together to keep this high-powered lamp cool enough to maintain maximum light output when you need it most.

Still not convinced this light is bright enough? A D7 pod will outshine seven D2 lights and produces more than twice the light output of our beastly D4 light pod.

D7 Pod Features

• High-Intensity Series Cree LEDs outputting 7665 lumens per pod. 
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments 
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels. 
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating 
• Low profile mounting bracket with stainless steel hardware included 

D7 Pod Specs

• LED's: (7x)10 Watt Cree XPL HI 
• Power Draw: 5 Amps 
• Raw Lumens: 7665
• Beam Distance: 1205 feet
• Beam Width:125 feet
• DataDim™ Compatible: Yes 
• Operating Voltage: 12 VDC 
• Pod Size: 4.4" Round x 3.9" Deep 
• Pod Weight: 1.8 lbs
• IP67 Waterproof & Submersible

D7 Pod - What's In The Box?

• (1x) LED Light Pods 
• (1x) Spot Lenses (Installed) 
• (1x) E-Mark Approved Lenses (Included) 
• (1x) Hinge Mounts with M8 Stainless Steel Hardware 
• (1x) Wiring Pigtail