ZETA Fork Top Bleeders S-Type - Tenere 700

Available colours:

• Blue
• Red

Everyone hates trapped air, especially in your forks. Don't risk dropping your bleed screws in the mud with this easy solution to releasing air build up in your forks

Features:

• New smaller size front fork air bleeder. 
• Height is only 21mm, compact design.
• Sold as a  pair to fit the Yamaha Tenere 700 front forks.
• Black anodized body.

FORK SEAL & DUST SEAL KIT - TENERE 700

• Quality seals that stand up to the toughest conditions and last ten times longer than OEM seals
• 30% less friction than other seals
• Smooth stroke due to triple sealing lips
• This kit contains 2 x Dust Seals and 2 x Oil Seals

Protect the fork of your Tenere 700 and dress it up with a competition touch, with the PUIG axle slider / fork protector.

Machined from a nylon block, with a reduced weight of 265 gr and 40 mm long x 50 mm in diameter, it will be the perfect and integral protection for both the fork and the suspension.

Its racing look will give your bike the Racing character that you appreciate so much and in addition to the black axle slider.

• An easy way to keep your fork seals clean and grit free.
• Extract dirt and grit trapped between fork seal and tube.
• Will work on conventional and up-side down forks.

SKF fork seal + dust cover 43mm suitable for Yamaha 700 Tenere

Shaft seal and dust cover by SKF:

•  less friction (approx. 20%) compared to conventional sealing rings
•  self-lubricating material
•  less stick-slip
•  (stick-slip = breakaway torque caused by static friction)
•  considerably improved sealing
•  less air intake into fork
•  less dirt intake into fork
•  thus less wear of sliding bush and oil
•  thus maintains optimal glide properties of the fork
•  increases long-term tightness
•  excellent water, dirt and air tightness. UV-resistant

For:

•  Yamaha 700 Tenere

Dimensions:
Fork seal ring Ø43 x 55.4 x 9 mm /
Wiper Ø 43 x 55.8 x 5 mm

Scope of delivery:

•  1 piece shaft seal
•  1 piece dust cover

(two sets are required for a complete fork)

AltRider Variable Height Suspension Links for the Yamaha Tenere 700

With AltRider’s Variable Height Suspension Lowering Links you can easily customize your suspension to raise your seat height 12 mm (0.5 in), or lower it either 18 mm (0.7 in), or a full 30 mm (1.1 in).

Raise your suspension to have a higher ground clearance, minimizing the chance of bottoming out on big off-road bumps. Lower your suspension to make your T7 easier and more comfortable to put both feet down during stops on uneven terrain, or even at stop lights. If you have a shorter inseam, increase your comfort and confidence knowing you will be able to plant both feet on the ground.

• Raise seat height 12 mm (0.5 in), or lower it 18 mm (0.7 in), or 30 mm (1.1 in)
• Raise the suspension for increased clearance
• Lower the suspension for increased rider confidence and control at stops on uneven terrain
• Laser-cut, stainless steel suspension links
• Amount of suspension change for each position is laser etched onto links
• Brushed stainless steel finish with laser-etched styling paying homage to the vintage Yamaha designs

With our Variable Height Suspension Lowering Links you’ll be able to customize your Tenere 700 for the type of ride you want to take. In addition, the 3 height options gives you the opportunity to experiment with how you want to run your suspension. 

Pair the Variable Suspension Links with the innovative AltRider Adjustable Aluminum Side Stand for Yamaha Tenere 700 and always have a reliable and sturdy kick stand, no matter how your suspension height is set.

Note: Lowering or raising the rear of your Tenere 700 will change the geometry and handling of the bike. Please make necessary adjustments to your fork height in order to match the stock geometry.

Variable Height Suspension Lowering Links Features

Install Instructions for Variable Height Suspension Lowering Links

AltRider Adjustable Aluminum Side Stand for Yamaha Tenere 700

The AltRider Adjustable Side Stand is the only side stand for the Tenere 700 that works with all suspension heights. Not only does this work with a lowered bike, but can also work with a raised bike.

When the suspension is altered from stock height, the kick stand is no longer set at the optimal angle. AltRider has created a durable side stand to work with just about any suspension height. With every point of positive engagement milled into the both parts of the sidestand, its built to last and easy to adjust.

• 7 adjustable height settings, including factory height, up to1 inch (2.5 cm) higher than factory, or up to two inches (5 cm) lower than factory
• Adjustable in 0.5 inch (1.25 cm) increments
• Convex foot ensures large and stable contact patch, no matter the terrain or suspension height
• Enlarged foot won’t sink into soft ground
• Comes with upgraded spring
• Available in black finish
• Installation is simple and it comes with all hardware needed, it even comes with a spring puller to make installing the spring a breeze. 

The Adjustable Side Stand is the perfect companion to the AltRider Variable Height Suspension Links for your Tenere 700.

Note: It is possible to do a side stand pivot, our billet aluminum design is just as strong, if not stronger than the cast aluminum side stand from Yamaha. We don’t recommend doing a side stand pivot, even with the OEM side stand.

Adjustable Aluminum Side Stand Features

Install Instructions for the Adjustable Aluminum Side Stand

The kit contains two fork stickers made of crystall material (thickness 0,5 mm), size 22cm X 17cm, suitable to be applied on your forks as additional protection.

Silk-screen printed with resistant and bright inks the used crystall is 0,5mm thick combined with a strong and long lasting adhesive, that are specifically designed for off-road use. 

To obtain the best result, the sticker must always be warmed up with a dryer and exposed to a light pressure. 

Do not use soaps or solvents; just clean up the surface with a dry rag.