• The highly elastic material perfectly follows your bike's contours. 
• Breathable, Ultra-soft, close-fitting and paint-friendly, this cover completely surrounds and protects your bike. 
• Perfectly held in place by the elasticated material, with an additional elastic cord running all the way around the base of the cover, leaving no chance for dust and dirt to land on your pride and joy. 
• Bright Red in colour with a contrasting Black stripe across the top.
• Perfect fit for all large capacity Dual Sport bikes, even with panniers fitted

• Length: 228 cm
• Width: 99 cm
• Height: 124 cm

Touratech's smallest ever compressor and repair kit, the Scout is the perfect travel companion for motorcycle touring where size matters.

The ResQ Scout Tyre Repair Kit is designed for motorcycles and ATV’s where space and weight are important factors. Weighing in at only 584g, the system easily fits into a bag or under-seat compartment for ultimate convenience and simplicity. With the bottle in place, the complete kit measures only 100mm x 75mm x 100mm.

• Ideal for motorcycles and ATV’s
• Same solution supplied to leading vehicle manufacturers
• High performance 12v compressor with cigarette lighter fitting
• Precision analogue gauge with PSI/ Bar indication
• Selection of nozzle accessories and built in deflate button
• 100 ml long lasting tyre sealant
• Fixes punctures up to a diameter of 6 mm
• Water based sealant easily washes out of tyre to allow for full tyre repair
• Non toxic, non corrosive, TPMS safe and approved by the largest automotive manufacturers in the world.
• Suitable for all vehicle brands
• Canvas carry case for tidy and simple storage

Items included in this kit:

• Connections for the power supply 12 V
• 4 clamps
• Compressor
• 100 ml tyre sealant

You can use the AirMan Tour to inflate motorcycle and bicycle tyres.

In addition to its handy portable and lightweight design, its high performance air compressor enables rapid inflation of tires.

Specifications:

• 12V DIN plug
• Built-in pressure gauge with psi and bar indication
• Deflate button
• Adaptors for bicycle tires, balls, and inflatable toys
• With 3,40 m long cable
• Max power 5 bar

Measurements: 152 x 120 x 60 mm

Examples:

• 4,0 bar in 1 minute (for example bike tires)
• 2,5 bar in 4 minutes (for example motorbike with tire volume of 15 Litres)
• 2,5 bar in 6,5 minutes (for example a car with tire volume of 25 litres)
• 2,5 bar in 8,5 minutes (for example a car with tire volume of 36 litres)

Part of the Iconic mugs collection, this version offers the Tenere 700 Rally design.

• Enjoy your coffee or cup of tea in true Yamaha style.
• 100% ceramic
• Custom design Tenere 700 Rally

Useful tool to lock the front wheel for servicing.

Also can be used for securing you bike when in transportation.

Simply slide over the front brake and clip back over the handle bar grip applying the front brake preventing the bike from rolling.

Eliminates the need for leaving your bike in gear and over tightening the tie downs.

Touratech professional toolset for Honda, Kawasaki, Suzuki, Triumph and Yamaha motorcycles, 70 pieces

Professional motorcycle tool for Japanese motorcycles and Triumph motorcycles for when you are on the road or in your workshop at home. Whether you are off on a big motorcycle trip or a small motorcycle tour, with this 70 piece on-board motorcycle toolset you can carry out necessary work at any time.

This robust double layer roll-up bag, weighing only 2.45 kg, offers a professional motorcycle toolset made of the best materials: S2 bits with black phosphate rust protection. Sockets and spanners are Cr-V satin chrome-plated. With its compact dimensions, there is always a place somewhere on your bike for this motorcycle toolbag in Touratech design.

MIT socket system (metric, inch, Torx): suitable for square, 6 or 12 point star, spline and damaged nuts.

Touratech professional toolset for Honda, Kawasaki, Suzuki, Triumph and Yamaha motorcycles, 70 pieces, contains:

1) Product Specs

Weight: 2.45 kg (4.40 lb)
Dimension Open: W 49 x H 26.5cm (W 19.29” x H 10.43”)
Dimension Rolled up: Ø 10 x H 26.5cm (Ø 3.93” x H 10.43”)

2) Japanese, Triumph Add on Pouch

3/8" Dr. MIT socket- 22mm (7/8, -)
1/2" Dr. MIT socket- 27mm (1-1/16, -)
3/8" Dr. 14mm stubby Hex bit socket
3/8” Dr. Aluminum Hex axle tool 17-22mm/24-19mm, max 120Nm
3/8" Dr. 72-Tooth Super Light Matt Finishing Ratchet, 304Nm
3/8"(F) to 1/2”(M) Low profile socket adapter with detent ball
3/8" Dr. Heavy duty magnetic chuck locking 1/4" bits socket, +100Nm
17mm combination spanner, MIT on ringside- 17mm (11/16, -)
600 Den Double-layer Tetoron™ Add on pouch Bag
210 Den water-resistant nylon bag (19 x 38cm) (7.4” x 15”)

3) The Basic Adventure Motorcycle Tool Set

3 in 1 Multi-Tool (130mmL): T-handle – 1/4" Dr. Hex bit ratchet (75Nm) – 11mm ratchet (100Nm)
1/4" hex bits lock extension with aluminum Turbo sleeve 135mmL
1/4" to 1/4" adapter
1/4" 25mmL Bits/6.35mm (T8, T10, T15, T20, T25, T27, T30, T40, T45, T50, PH3, Slot5.5)
1/4" 25mmL Bits/6.35mm (H1.5, H2, H2.5, H3, H4, H5, H5.5, H6, H7, H8, H10, PH2)
1/4" Dr. MIT socket – 6mm (1/4, E8)
1/4" Dr. MIT socket – 8mm (5/16, E10)
1/4" Dr. MIT socket – 10mm (3/8, E12)
1/4" Dr. MIT socket – 11mm (7/16, E14)
1/4" Dr. MIT socket – 12mm (15/32, -)
3/8" Dr. MIT socket- 13mm (1/2, E16)
3/8" Dr. MIT socket- 14mm (9/16, E18)
3/8" Dr. MIT socket- 15mm (19/32, -)
3/8" Dr. MIT socket – 17mm (11/16, -)
3/8" Dr. 14 & 16mm Spark Plug Sockets with outer HEX 16mm
3/8" Dr. 125mmL Poplock® extension with outer HEX 16mm
8mm open-end ring spanner, MIT on ringside – 8mm (5/16, E10)
10mm open-end ring spanner, MIT on ringside – 10mm (3/8, E12)
12mm open-end ring spanner, MIT on ringside – 12mm (15/32, -)
13mm open-end RATCHET spanner, MIT on ringside – 13mm (1/2, E16)
14mm open-end ring spanner, MIT on ringside – 14mm (9/16, E18)
16mm open-end ring spanner, MIT on ringside -16mm (5/8, E20)
3/8" socket adapter with a locking system for 13mm open-end spanner
Small tire pressure gauge 0.4 to 3.5Kg & 5 to 50Psi
Plier cutting long nose Vise-Grip 169mmL
Cable ties x 10 pcs, 200mmL x 4.5mm
Socket holder 5 x 1/4? & 4 x 3/8"
600 Den Double-layer Tetoron™ pouch Bag

GSF 1200 Bandit, XT600Z, XTZ 750 SUPER TENERE, XRV 750 Africa Twin, Bandit 1250, Bandit 1250S, Bandit 650, CRF 1000 L Adventure Sports, CRF 1000 L Africa Twin, Tiger 1050i, Tiger 800, Tiger 800 XC, Tiger 800 XCx, Tiger 800 XR, Tiger 800 XRx, Tiger 955, Tiger Explorer, Tiger Sport, V-Strom 650 XT, XT1200Z, XT600E, XT660R, XT660X, XT660Z, XT660Z ABS, Ténéré 700, CRF 1100 L Africa Twin, CRF 1100 L Adventure Sports, Tiger 900

Garage mats function as protective environmental work-mats both indoors and outdoors, preventing fuel and lubricant spills when carrying out maintenance and repairs.

Also can be used for decoration and display purposes in home garages.

Each mat is constructed with a nylon-fibre top section which is oil and water-resistant. The backing is non-slip and prevents lubricants from seeping through. 

This mat fully complies with FIM regulations for environmental mats fluid absorption, suitable for use at tracks and circuits.

• Mat is hand-washable.
• Dimension 190x80cm
• Colours available: Grey, Blue, Orange

KEY FEATURES:

• Adventure Series garage mat
• Large size mat - 190x80cm
• Durable nylon fibre mat top
• Non-slip backing
• Oil and water-resistant

This is a handy tool for both the garage and riders with limited space on the trail.

Features:

• Length - 260mm
• Weight - 250g
• One end fits the 27mm rear axle nut, the other end is a tyre lever tool.
• Made of heat treated steel.

This is a handy tool for both the garage and riders with limited space on the trail.

Features:

• Length - 260mm
• Weight - 250g
• One end fits the 19mm front axle nut, the other end is a tyre lever tool.
• Made of heat treated steel.

Loctite 243 Medium Threadlocker Blue

LOCTITE 243 is a medium strength blue threadlocking adhesive that seals and secures metal nuts and bolts to prevent loosening due to shock and vibration.

LOCTITE® 243 is a general purpose threadlocker that provides a medium strength bond.

LOCTITE 243 works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.

It is proven to be tolerant of minor contamination due to industrial oils, e.g., motor oils, corrosion prevention oils and cutting fluid.

• Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
• Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
• Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
• Permits disassembly with hand tools for servicing
• P1 NSF Reg. No.: 123000

Available in 5ml, 10ml, or 50ml bottle