Touratech Dual USB socket for handlebar clamp mount

This product is intended for most motorcycles with tubular handlebars. It is mounted over the handlebar clamp placing the charger in a ergonomically convenient place.The bracket design allows 4 different positions (left, right, front, back). The kit includes all the hardware needed for installation.

Output power connection 1: 2.3 A / connection 2: 1.0 A

It is supplied with:

• Dual USB charger with nut
• Power cable fused
• Mounting bracket
• Set of M8 screws, washers, spacers and covers

Note: not compatible with older air cooled R1200GS handlebars (K25)

Double USB socket for attachment to the handlebar or for installation in a location of your choice.

• Input voltage 12V - 24V
• 2 charging ports: USB-C and USB-A
• Quick Charge 3.0 for fast charging

 
The socket provides a power supply for up to 2 external consumers (one USB-C and one USB-A port), e.g. for navigation devices, cell phones, MP3 players, etc.

Thanks to the Quick Charge 3.0 charging function, your devices will be charged again in no time.

The innovative protective cover acts as a discharge protection for the motorcycle battery: as soon as the cover is put on, the power supply is interrupted.
 

Features:

• Quick Charge 3.0 charging function
• 2 ports: USB-C and USB-A
• Universal mount for inch and metric handlebars (21-25cm)
• Installation of cladding is possible as an alternative
• Protective cover with discharge protection function
• waterproof according to IPX6 (when closed)
• Input voltage: 12V - 24V
• Output voltage/current: 5V/3A, 9V/2A, 12V/1.5A
• Installation depth (inside) 45 mm
• Diameter (inner) 28 mm

 
Socket Details:

• Double USB on-board socket with protective cover (IPX6 waterproof)
• Connection cable (length 170 cm)
• Fuse

Whether you need it for your original windscreen or as accessory to your new Touratech windscreen - with Touratech's windscreen spoiler Evo, you absolutely gain extra comfort on each terrain.

Evo offers the right balance between protection and ventilation - whether you drive on motorways, roads or off-road. Height, inclination and distance to the windscreen can easily be adjusted - you do not need any tools.

If you are going fast and the weather is rainy, fasten the spoiler at its highest level to benefit from an effective wind and weather protection. It is a noticeable relief for your head and upper body, and wind noises in your helmet are significantly reduced.

If you set the lowest level, the windscreen spoiler almost disappears. This guarantees maximum ventilation when riding off-road.

The "bended" 3D form does not only adapt optimally to the windscreen design of modern bikes, it also guarantees optimum airflow and thus significantly less turbulence. An additional airflow between spoiler and windscreen is generated. This airflow minimizes the turbulences being produced at the end of the windscreen.

Thanks to laterally fixed holders, the central field of view is not impaired. Additional, undesired turbulences are also prevented. The spoiler can easily be fixed on every windscreen, is steady on every track and can be removed again tracelessly, if necessary.

with ABE (for original windscreens of various manufacturers)

Windscreen width: 26 cm

Windscreen height: 10 cm

Universal Lockable Windscreen Spoiler

Touratech's universal windscreem spoiler can be used to considerably improve the wind protection offered by most screens, thereby improving comfort when travelling over long distances or on the motorway.

The spoiler is mounted easily and securely. The complex lever mechanics clamp the spoiler securely to the windscreen.

With just a few hand motions the spoiler unit can be unmounted and the motorcycle can again be driven with a shorter windscreen this is often desirable or necessary (e.g. for off-road riding)

The risk of injury posed by a high windscreen when riding off-road is, thus, not present. This version of the spoiler for the windscreen is lockable, thereby providing a certain degree of protection against quick unmounting of the spoiler or thieves.
You can adjust or reduce the size of the spoiler shield for your individual needs. Increases the height of the windscreen by approx. 130 mm.

Size: approx. 280 mm x 177 mm x 55 mm  

Accessory Bracket for 25 mm tube

With the Touratech accessory bracket you can individually mount your highway pegs, auxiliary headlights or a lightbar on your Touratech crash bar or any other 25 mm tube.

The bracket for M8 nuts and cylinder head bolts make mounting your equipment a breeze. Your crash bar turns into an additional, individual mounting option in no time - without drilling, filing, sawing.

Designed specifically for tubes with electropolished surface. Please note that the item may cause damage on the surface of powder-coated pipes!

LED On road Driving Light

The HIGH beam, that is worth it's name!

Equipped with a spotbeam of only 8° angle, that still generates 0.25 lux at 377m, you can drive with foresight even at high speeds.

High quality OSRAM LED-Chips ensure a long service life and a constant colour temperature even after thousands of hours of operation.

Special features:

• Certification as driving light and electromagnetic compatibility
• Homologation ECE R112 and R10
• Range: 377m (0.25Lx)
• Reference number: 12.5
• shockproof and waterproof
• UV-shielded
• anodized polyester-powder coating
• efficient polycarbonate-lens reflector

Technical Data:

• Input Voltage: 9-36 V
• Light Source: 6x OSRAM LED Chips
• Power input: 14 W
• Raw lumens: 920 lm
• Light spread: ECE driving pattern Spot 8°
• Light intensity: 35.600 cd
• Protection class: IP68
• Lens: break-resistant polycarbonate
• Housing: die-cast Aluminium
• Mounting: standing*hanging
• Connection: DT-plug
• Weight: 324 gr.
• Dimension: 182.0 x 63.5 x 38.0 mm
• Hole distance: 113.0 mm

Protected against:

• Reverse polarity
• RFI/EMC Interferences
• Voltage and Current surges

This special spoiler for the windscreen is perfect for undertaking long, fast motorbike journeys in comfort. There is a significant reduction in turbulence and wind pressure against the helmet.

It simply fits onto the windscreen, and is secured using the snap closure.

When going off-road, the spoiler is easy to remove in seconds.

- lockable

Manufactured to Touratech's wellknown high quality standards, the valve fitted to the top enables you to squeeze out all the air when rolling the bag up.  This allows the bag to fit every case, topcase, rucksack, leather bag, etc. without losing valuable storage space.

With the zipper and robust, 100% waterproof material you can carry this bag on your luggage rack or rear seat - it is not necessary to fit inside a pannier.

Bag Specification:

• Volume: approx. 50 litres
• Fits all panniers and cases
• Universal use
• 100% waterproof
• integrated ventilation valve
• Proven roll zipper

Price is for a single bag.

ARNO Stretch Bands 75 cm

The versatile little helpers for packing and lashing down.

•  100 kg guaranteed load bearing pressure
•  With a metal clasp
•  With a yellow TOURATECH logo

Colour: black
Length: 75 cm
Width: 18 mm

ARNO Stretch Bands 100 cm

The versatile little helpers for packing and lashing down.

•  100 kg guaranteed load bearing pressure
•  With a metal clasp
•  With a yellow TOURATECH logo

Colour: black
Length: 100 cm
Width: 18 mm