ACF-50 is one of the best inventions for protecting your bike against road salt and grime. There are many aerosol cans available but we use the refillable pump action spray bottle when treating our bikes. This means you can get the ACF-50 where you want it much more accurately and you aren't wasting any spraying it all over the place. We prefer the ACF-50 as you don't need to keep reapplying it over the winter months.

What's included in the price:
- 1 quart bottle of ACF-50 (that's just under a litre).
- A refillable pump action spray bottle.
- Full usage instructions.

What is it? ACF-50 (Anti-Corrosion Formula) is an aerospace product that is now available to motorcyclists. Its aviation approval is MIL-SPEC 81309 Type II and III, which means it is approved for ferrous and non-ferrous metals, electrical systems and electronic components.

It is a VERY sophisticated type of ‘thin film’ water displacement product designed as a corrosion prevention and inhibiting compound for the harsh environmental conditions associated with aircraft operation with the added advantage that it will stop existing corrosion and is slow to deteriorate (it has a 12 to 18 month active life). It is also a very efficient penetrant without loosening structural attachments (a bit disastrous on an aircraft or motorcycle) and an excellent lubricant without having any high-pressure (HP) lubricants, wax, silicon or Teflon additives (which actually seal in moisture thereby aggravating and perpetuating the corrosion process). It is ‘pro-active’, neither passive nor waxy, is compatible with most plastics and rubbers is EXTREMELY ECONOMICAL IN USE - AND CONTAINS NO WATER.

Its uses on motorcycles are very similar to those on aircraft. Sprayed into the structure, joints and welds i.e. under the tank and seat, frame and steering head area (where the corrosion works away un-noticed), under panels and on hidden parts of the engine, radiators, engine cases, forks, calipers, wheels, anywhere on the bike really because it will work hard to prevent corrosion and structural degeneration. Where corrosion is already evident it will help inhibit further progress by insulating and electrically ‘switching off’ the corrosion cell. It will also penetrate around bolts, screws and hardware protecting them and preventing seizure.

Exposed engine and gearbox cases, swinging arms, forks and other exposed parts will benefit from ACF-50’s thin film technology by not corroding, will stay looking good and will clean up easily after a salt laden ride. It is also excellent on black plastic trim without leaving the residue of silicon.

It will protect electrical joints, plugs and components and prevent corrosion causing high resistance joints. This goes for PCB’s and electronics as well, such as computerised ignition and fuel control units and their multi pin plugs, while switches, controls and levers will all be lubricated as well as protected from corrosion. Multi pin plugs and connectors benefit from having ACF-50 applied directly to the contacts.

What will it actually do? It will, with regular applications; make maintenance easier and save you money, make the bike easier to clean, look better, help prevent surface/structural/electrical corrosion related failure thereby increasing reliability and it will increase the bike’s value. That’s what it will actually do!

How to use it! Being designed for aircraft it has a non-flammable propellant so when cold it sprays like shaving foam.

• Keep the tin warm and shake it really well before use to activate the propellant.
• Give the area the lightest coating/spray you can, enough so that when it creeps it will cover all.
• It really does creep, so caution with calipers or it will creep on to the pads.
• Also use a rag and spread it over the areas sprayed, the rag gets impregnated and then spreads it further.
• Under the tank and hidden areas it will last up to a year, (at least a year in plugs and switches).
• Exposed areas such as forks, the front of the engine, wheels and calipers; I just re-treat as necessary.
• You can tell if it is still active because any water will ‘bead’ on contact.

Black Closed Cell Single Sided Self Adhesive Neoprene Foam Tape.

This is a high quality single sided tape - closed celled - manufactured from medium hardness foam.

An acrylic pressure sensitive adhesive is coated on one side - with a paper release liner on the adhesive face.

This material will act as a water-seal and air/dust seal when compressed by 30%.

APPLICATIONS:
- Forms a compression water seal and forms a compression air / dust seal.
- General purpose gap filling.
- Cushioning and anti slip mounting.

PRODUCT BENEFITS:
- Service temperature –30°C to +70°C
- Good resistance to dilute acids & alkalis
- Paper release liner on the adhesive face - reducing dimensional change during application
- Very good Ultra violet {UV} Light resistance
- Resistance to abrasion - corrosion and moisture
- Suitable for motorbike environment.

Each roll is 19mm wide x 5mm thick x 2 metres long.

Corrosion Block Grease has the same corrosion protection properties as ACF-50 but in grease form. Can be used as an assembly grease (for example did you know that the copper in copper grease corrodes alloy?) so use this for such things as engine/transmission cases, caliper bolts, wheel bearings, wheel axle bolts (which always seem to corrode), battery terminals, side and centre stands, foot pegs, brake and clutch lever pivots, etc. etc.

Corrosion Block is an anti-corrosion compound developed exclusively to stop existing corrosion and prevent new. It is unique in that it is designed for use in electrics and electronics as well as metals and structures. This makes this product essential for your day-to-day routine maintenance and as long-term asset protection for your boat/equipment within the harsh marine environment.

What will it actually do? It will, with regular applications, make maintenance easier and save you money, easier to clean, look better, help prevent surface/structural/electrical corrosion related failure thereby increasing reliability and it will increase the bike’s value. It will significantly reduce your replacement, repair and labour expenses. That’s what it will actually do!

The Facts:
• KILLS existing corrosion
• PREVENTS new from forming
• Long lasting LUBRICANT
• APPROVED for ELECTRONICS
• Non-Toxic & Environmentally Friendly

Where to use it

Corrosion Block is simply applied to the structure, joints and welds, i.e. under hidden areas, where the corrosion works away un-noticed, under panels and on hidden parts of the engine, gear boxes, generators, switch panels and avionics, especially on outboard engines where it will work hard to prevent corrosion and structural degeneration. Where corrosion is already evident it will help inhibit further progress by insulating and electrically ‘switching off’ the corrosion cell. It will also penetrate around bolts, screws and hardware, protecting them from electrolytic corrosion and preventing seizure.

It will protect electrical joints, plugs and components and prevent corrosion causing high resistance joints. This goes for PCB’s and electronics as well, such as computerised ignition and fuel control units and their multi pin plugs, radio’s, radar and antenna’s, while switches, controls and levers will all be lubricated as well as protected from corrosion. It does not affect the working of electrical or electronic components however keep it off LCD’s. Multi pin plugs and connectors benefit from having Corrosion Block applied directly to the contacts. Corrosion Block has restored many a failed electronic/electrical component. It’s uses are unending, you will love it!

High performance 10w fork oil

You will require 2 bottles to replace the oil in both fork legs.

• XRV650 RD03 - each fork leg requires 656cc
• XRV750 RD04 - each fork leg requires 635cc
• XRV750 RD07/07A - each fork leg requires 648cc
• CRF1000 - each fork leg requires 721cc

Technical Data

Rock Oil SVI Suspension Fluids
SVI Suspension Fluids are blended using technologically advanced synthetics together with the very latest additive technology to improve foaming tendencies and prolong seal life.

Features

• Extremely high viscosity index to maintain damping at elevated temperature whilst ensuring correct suspension operation at low temperatures.
• Stable under pressure and are compatible with air, nitrogen or argon charged suspension systems.
• Suitable for use in cartridge forks.
• Should the need for more precise damping be required SVI Suspension Fluids range are all fully compatible with each other and will mix with ease.
• Excellent anti-wear protection and a high resistance to water contamination and degradation.
• Excellent performance and longer service life, especially under extreme conditions of use such as racing.

Typical Physical Characteristics

• Product - SVI 10
• ISO VG - 32
• Density @ 15C - 0.867
• Viscosity @ 40C (cSt) - 33.2
• Viscosity @ 100C (cSt) - 6.8
• Viscosity Index - 170
• Pour Point (C) - -36
• Appearance - Purple
• Product Code - 05140

High performance 5w fork oil - standard weight for all Africa Twins

You will require 2 bottles to replace the oil in both fork legs.
• XRV650 RD03 - each fork leg requires 656cc
• XRV750 RD04 - each fork leg requires 635cc
• XRV750 RD07/07A - each fork leg requires 648cc

We use this fork oil in all of our own Africa Twins

Technical Data

Rock Oil SVI Suspension Fluids
SVI Suspension Fluids are blended using technologically advanced synthetics together with the very latest additive technology to improve foaming tendencies and prolong seal life.

Features
Extremely high viscosity index to maintain damping at elevated temperature whilst ensuring correct suspension operation at low temperatures.
Stable under pressure and are compatible with air, nitrogen or argon charged suspension systems.
Suitable for use in cartridge forks, in particular SVI 5 (Cartridge 01).
Should the need for more precise damping be required SVI Suspension Fluids range are all fully compatible with each other and will mix with ease.
Excellent anti-wear protection and a high resistance to water contamination and degradation.
Excellent performance and longer service life, especially under extreme conditions of use such as racing.

Typical Physical Characteristics
• Product - SVI 5
• ISO VG - 15
• Density @ 15C - 0.850
• Viscosity @ 40C (cSt) - 15.4
• Viscosity @ 100C (cSt) - 4.6
• Viscosity Index - 243
• Pour Point (C) - -40
• Appearance - Blue
• Product Code - 05120

High performance 7.5w fork oil

You will require 2 bottles to replace the oil in both fork legs.
• XRV650 RD03 - each fork leg requires 656cc
• XRV750 RD04 - each fork leg requires 635cc
• XRV750 RD07/07A - each fork leg requires 648cc

Technical Data

Rock Oil SVI Suspension Fluids
SVI Suspension Fluids are blended using technologically advanced synthetics together with the very latest additive technology to improve foaming tendencies and prolong seal life.

Features
Extremely high viscosity index to maintain damping at elevated temperature whilst ensuring correct suspension operation at low temperatures.
Stable under pressure and are compatible with air, nitrogen or argon charged suspension systems.
Suitable for use in cartridge forks.
Should the need for more precise damping be required SVI Suspension Fluids range are all fully compatible with each other and will mix with ease.
Excellent anti-wear protection and a high resistance to water contamination and degradation.
Excellent performance and longer service life, especially under extreme conditions of use such as racing.

Typical Physical Characteristics
• Product - SVI 7.5
• ISO VG - 22
• Density @ 15C - 0.857
• Viscosity @ 40C (cSt) - 22.0
• Viscosity @ 100C (cSt) - 6.2
• Viscosity Index - 259
• Pour Point (C) - -40
• Appearance - Yellow
• Product Code - 05130

The perfect screwdriver for your Honda screws.

Your Honda uses JIS screws NOT Phillips screws, so use the correct Japanese manufactured tool to save damaging them.

Ever wondered why your Phillips screwdrivers keep rounding out on your Honda screws?  Well basically Honda use JIS screws (Japanese Industry Standard) and not Phillips screws that we are used to.

These JIS screwdrivers will fit perfectly into the screwhead and not slip or round out as they usually do if using a Phillips screwdriver.

JIS looks much like a Phillips screw, but is designed not to cam out and will, therefore, be damaged by a Phillips screwdriver if it is too tight. The driver has a 57 degree point with a flat tip, parallel wings.

JIS screwdrivers will work perfectly well with both JIS screws and Phillips screws, but a Philips screwdriver will only be of optimum use on a Phillips screw and will likely damage a JIS screw.

Give your bike the treatment it deserves and use the proper tools to save the original fasteners.

VESSEL TOOLS 980 Series

VESSEL MEGADORA "IMPACTA" SCREWDRIVER

The 980 Series "Impacta" is a revolutionary screwdriver that features a built-in impact driven screw removal function.

• Tang-Thru nut with cam rotation mechanism
• Non-slip surface secures a firm grip even when your hands are covered with oil
• Fully hardened chrome vanadium steel shank
• High precision black tip point

Great for:

• Stripped Screws
• Rusted Screws
• Stuck Screws

The proprietary Tang-Thru nut incorporates a cam rotation mechanism, which turns the driving tip counter-clockwise by 12° when the handle is hit with a hammer.

The "Impacta" leverages impact acceleration to remove stuck screws.

Slip-Proof Handle:
When used with oil covered hands, tightening torque is 26% higher with the "Impacta" than with other VESSEL screwdrivers.

The perfect screwdriver for your Honda screws.

Your Honda uses JIS (Japanese Industry Standard) screws NOT Phillips screws, so use the correct Japanese manufactured tools to save damaging them.

Ever wondered why your Phillips screwdrivers keep rounding out on your Honda screws?  Well basically Honda use JIS screws (Japanese Industry Standard) and not Phillips screws that we are used to.

These JIS screwdrivers will fit perfectly into the screwhead and not slip or round out as they usually do if using a Phillips screwdriver.

JIS looks much like a Phillips screw, but is designed not to cam out and will, therefore, be damaged by a Phillips screwdriver if it is too tight. The driver has a 57 degree point with a flat tip, parallel wings.

JIS screwdrivers will work perfectly well with both JIS screws and Phillips screws, but a Philips screwdriver will only be of optimum use on a Phillips screw and will likely damage a JIS screw.

Give your bike the treatment it deserves and use the proper tools to save the original fasteners.

VESSEL TOOLS 900 Series

VESSEL MEGADORA JAWSFIT SCREWDRIVER

The 900 Series is a standard screwdriver that features a JAWSFIT tip.

• JIS JAWSFIT tip that grips the screw and doesn’t cause CAM-OUT
• A knurled shank keeps hands from slipping in fast turning
• Fully hardened chrome vanadium steel shank
• High precision black tip point

Great for:

• Stripped Screws
• Rusted Screws
• Stuck Screws

Slip-Proof Handle: 
MEGADORA models are equipped with the most advanced triple-moulded handle for comfort. The corners of the hexagonal cross-section are moulded with elastomer for a soft fit and high torque transmission.

The kit contains 3 JIS Screwdrivers – P1, P2 and P3

Country of Origin - JAPAN

Manufacturers Warranty - Limited Lifetime

MOTOREX COOLANT M5.0 Ready to use

MOTOREX COOLANT M5.0 Ready to use is based on ethylene glycol which is nitrite, phosphate and amine-free.

It meets the requirements of various manufacturers of high-performance engines.

In addition to outstanding antifreeze protection, this coolant offers excellent year-round corrosion protection for all metals and alloys used in the cooling systems of combustion engines.

Prolongs the life of the engine. Green fluid.

Green Pre-mixed M5.0 Coolant. Extremely high boiling point over 205 degrees C / 400 degrees F at 7psi. Extends cooling performance. Improves durability. Permits more spark without detonation. Facilitates maximum heat absorption.

• Good corrosion protection for metals and alloys in the cooling system
• Good compatibility with commercially available elastomers and plastics
• Nitrite-free, phosphate-free and amine-free
• High chemical stability
• Recommended usage duration 3 years