MCCRUISE - Motorcycle Cruise Controls

Global leader in 'precision' speed control for motorcycles and ATVs

This cruise control fits the standard Africa Twin and the Africa Twin Adventure Sports models from 2018 onwards (models with 'Fly by Wire' throttle)

The MCCruise is a 'true' cruise control unit adapted and developed specifically for the CRF1000, with a custom made and fully plug and play wiring harness, using genuine OEM connectors and terminals as used by Honda. There is no wire splicing or any other permanent changes made to your Africa Twin.

Cruise control switch:

New Slim MCCruise switch: Our new fully-featured and weatherproof switch is fitted between the L/H switch block and the clutch lever mount (manual shift) or hand brake mount (DCT) on your CRF1000.  

• Backlit buttons for night use, 
• power (ON-OFF) indicator light and 
• engage indicator light.  
• The switch is 10mm (3/8") wide, so it may be necessary to slide the clutch lever assembly across to make space to mount the switch on the handlebar.  

Please contact us for installation instructions if you wish to see how it is fitted.

Speed setting: The cruise computer is fully configurable by the user for either km/h or mph.

The electronic cruise control unit is shipped with all parts, terminal tools, parts list and detailed installation instructions for this specific Honda CRF1000 kit.

Benefits:

• substantial ergonomic benefits
• reduced fuel consumption;
• reduced risk of speeding fines or loss of licence
• reduced stress when the cruise is engaged

PLEASE SELECT EITHER MANUAL TRANSMISSION OR DCT

Why would you want a cruise control from MotorCycle Cruise Controls?

• Simply because we deliver what we promise:
• Safety - we design and build our products specifically for motorcycles -  Our R&D stretches back 18 years and is on-going and is a direct result of our own experience. 
• Support - MCCruise’ service and support is second to none:

 MCCruise holds Global Product Liability Insurance. 

400 Amp UltraSafe Lithium Jump Starter

The GB20 is a portable lithium-ion battery jump starter pack that delivers 400-amps (4,650 J3S) for jump starting a dead battery in seconds.

It features a patented safety technology that provides spark-proof connections and reverse polarity protection making safe and easy for anyone to use.

It's a powerful battery booster that doubles as a portable power source for recharging USB devices, like a smartphone, tablet and more.

Designed for a car, boat, motorcycle, RV and more with engines up to 4ltr.

• A lithium battery jump starter rated at 400 Amps (4,650 Joules3S).
• Spark-proof connections and reverse polarity protection.
• Recharges USB devices, like smartphones, tablets, and more.
• 100 lumen LED flashlight with multiple modes, including SOS.
• Jump starts engines up to 4 ltrs.
• Provides up to 20 jump starts on a single charge.

Simple

Everything you need on one interface.

We designed the user interface to be simple and easy to understand. LED status indicators display the internal lithium batteries charge level and charging status. Error indicators show when connected in reverse polarity or temporarily disabled for thermal protection. Simply turn on the LED flashlight, recharge a USB device, or use manual override for deeply discharged batteries.

Multi-function jump starter.

Jump start cars, motorcycles, ATVs, UTVs, snowmobiles, personal watercraft, and lawn & garden equipment. Even recharge USB devices, like a smartphone, tablet and much more.

Jump starts per charge.
A powerful lithium jump starter capable of jump starting up to 20 vehicles on a single charge. It is rated for over 1,000 charge cycles and holds its charge level for over a year with minimal power loss.

Needle-nosed battery booster clamps.
Perfect for hard-to-reach battery applications.
Designed for connecting to batteries with restricted access to the battery terminals, like a motorcycle. The needle-nosed battery clamps feature an integrated eyelet connector that detaches and allows for permanent battery installation for plug-n-play jump starting.

Portable, hand-held design
Incredible power in a pocket-sized jump box.
Power for power, this lithium jump starter outperforms traditional lead-acid battery booster packs at a fraction of the size and weight. It's over 8X smaller and 8X lighter, and its lithium-powered design makes it more compact and portable than ever before. Conveniently store it in a pannier, topbox, tankbag, or toolkit.

Stay charged. Power your USB devices on the go.
How many times will a GB20 recharge my device?
The built in 2.1A USB out port can power all of your USB devices, such as smartphones, GoPro cameras, wireless headphones, and more. The battery capacity inside of your iPhone, for example, is measured in “milliamp-hours," or mAh—a way of measuring how long the device will last. Devices that are frequently being used, like phones and cameras, often require more power to run all day than the device’s battery is rated for. Boost's battery pack extends the life and running time of your device. Plus, powering your device from an external battery pack will reduce the internal battery’s charge cycles, extending the usable life.

Ultra-bright.
100-lumen dual LED flashlight.
A rechargeable lithium-powered LED flashlight with seven light modes, including SOS and Emergency Strobe. With multiple luminosity settings, it is immediately adaptable to a variety of situations. Using it's powerful wash light will help you see your engine, help you change a tire at night or even warn oncoming traffic when you in need of roadside assistance.

Technical Specifications.

• What's In The Box
  • GB20 Lithium Battery Jump Starter
  • Needle-Nosed Battery Clamps
  • Micro USB Cable
  • Microfiber Storage Bag
  • User Guide & Warranty Information
• Starting Current - 400 Amps (Peak)
• Joules 3S Rating - 4,650 J3S
• Battery Types - 12 Volt Lead-Acid Batteries
• Internal Battery - 24 Watt-Hour Lithium-Ion
• USB Input - 2.1 Amps
• USB Output - 2.1 Amps
• LED Flashlight - 100 Lumens

OEM Honda FRONT ABS Ring - CRF1000 (all models)

This ABS ring fits the following models:

• CRF1000 Africa Twin (manual) 2016/2017
• CRF1000 Africa Twin (DCT) 2016/2017
• CRF1000 Africa Twin (manual) 2018 onwards
• CRF1000 Africa Twin (DCT) 2018 onwards
• CRF1000 Africa Twin Adventure Sport (manual) 2018 onwards
• CRF1000 Africa Twin Adventure Sport (manual) 2018 onwards

OEM Honda REAR ABS Ring - CRF1000 (all models)

This ABS ring fits the following models:

• CRF1000 Africa Twin (manual) 2016/2017
• CRF1000 Africa Twin (DCT) 2016/2017
• CRF1000 Africa Twin (manual) 2018 onwards
• CRF1000 Africa Twin (DCT) 2018 onwards
• CRF1000 Africa Twin Adventure Sport (manual) 2018 onwards
• CRF1000 Africa Twin Adventure Sport (manual) 2018 onwards

This is a complete Plug and Play Denali Dual Intensity LED Light Kit with the OEM Honda Fog Light Switch already built into the loom.

The kit contains the following

• 1 x OEM Honda Fog Light Switch
• 2 x Denali D2 LED Dual Intensity Light Pods
• 1 x Denali DataDim Dual Intensity Controller Module
• 1 x Plug and Play Wiring Loom

This means that there is no cutting or tapping into the existing wiring on your CRF1000 or CRF1000 Adventure Sport - you just plug this kit into existing connectors that are already in your bike's wiring loom.

The loom also has a connector allowing the fitment of the OEM Honda Auxilliary Power Socket as well or power a GPS.

• Engine Running / Fog Light Switch OFF / Denali Lights OFF
• Engine Running / Fog Light Switch ON / Denali Lights on at 50% DRL level
• Engine Running / Fog Light Switch ON / Main Beam ON (or flasher switch pressed) / Denali Lights on at 100%

Very neat install with no excess loom to try and find space for - specifically manufactured for the Honda CRF1000 Afria TWin and Adventure Sport.

Fits all models of CRF1000 Africa Twin, and CRF1000 Adventure Sport.

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile.

The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit.

Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can switch between half and full intensity with your vehicle's original high beam switch.

Our DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up. 

 
DENALI 2.0 Features 

• HiDrive High-Intensity Cree LED's 
• TriOptic Multi-Beam Lens System 
• DataDim LED Dimming Technology 
• HotSwap Modular Wiring Harness System
• DrySeal Submersible Waterproof Light Housings 
• Impact PC Corrosion-Proof Bezels
• LiveActive Intelligent Thermal Management
• Chrome Plated Optic Holders
• Low-Profile Mount with Stainless Steel Hardware
• E Mark Lenses Included

Features Explained:

HiDrive High-Intensity 10 Watt LED's:
2.0 lights feature the latest development from Cree; a new Hi-Intensity LED chip that features a redesigned primary optic to maximize light output through secondary optics. The “HI” series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw.  

TriOptic Multi-Beam Lens System:
2.0 Light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. 

Data Dim LED Dimming Technology:
All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.   Plug in our DataDim Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. 

Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming.     

DrySeal Submersible Waterproof Light Housings:
In addition to molded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed.  

Impact PC Corrosion-Proof Bezels:
Our Impact PC bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode even after taking repeated impacts from rocks and debris. 

LiveActive Intelligent Thermal Management:
DENALI 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most. 

Chrome Plated Optic Holders:
We take the extra step to chrome plate our optic holders to maximize reflectivity and refine the appearance match the original chrome reflectors of your vehicle headlights. 

Low-Profile Mount with Stainless Steel Hardware:
DENALI 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. 

E Mark Approved Lenses
DENALI 2.0 kits include E Mark approved lenses

 
D2 Product Specs:

• LED's: (2x) 10 Watt Cree XPL HI
• Power Draw: 1.6 Amps
• Beam Distance (Spot): 525 Feet
• Beam Width (Spot): 75 Feet
• Raw Lumens: 2190
• Intensity: Single Intensity Harness
• DataDim Compatible: Yes 
• Operating Voltage: 12 VDC
• Pod Size:  2.2" Round x 2.4" Deep

This is a complete Plug and Play Denali Dual Intensity LED Light Kit with the OEM Honda Fog Light Switch already built into the loom.

The kit contains the following

• 1 x OEM Honda Fog Light Switch
• 2 x Denali D4 LED Dual Intensity Light Pods
• 1 x Denali DataDim Dual Intensity Controller Module
• 1 x Plug and Play Wiring Loom

This means that there is no cutting or tapping into the existing wiring on your CRF1000 or CRF1000 Adventure Sport - you just plug this kit into existing connectors that are already in your bike's wiring loom.

The loom also has a connector allowing the fitment of the OEM Honda Auxilliary Power Socket as well or power a GPS.

• Engine Running / Fog Light Switch OFF / Denali Lights OFF
• Engine Running / Fog Light Switch ON / Denali Lights on at 50% DRL level
• Engine Running / Fog Light Switch ON / Main Beam ON (or flasher switch pressed) / Denali Lights on at 100%

Very neat install with no excess loom to try and find space for - specifically manufactured for the Honda CRF1000 Afria TWin and Adventure Sport.

Fits all models of CRF1000 Africa Twin, and CRF1000 Adventure Sport.

DENALI DR4 2.0 LED TriOptic™ LED light

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile.

The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit.

Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can switch between half and full intensity with your vehicle's original high beam switch.

Our DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up. 

 
DENALI 2.0 Features 

• HiDrive High-Intensity Cree LED's 
• TriOptic Multi-Beam Lens System 
• DataDim LED Dimming Technology 
• HotSwap Modular Wiring Harness System
• DrySeal Submersible Waterproof Light Housings 
• Impact PC Corrosion-Proof Bezels
• LiveActive Intelligent Thermal Management
• Chrome Plated Optic Holders
• Low-Profile Mount with Stainless Steel Hardware
• E Mark Lenses Included

Features Explained:

HiDrive High-Intensity 10 Watt LED's:
2.0 lights feature the latest development from Cree; a new Hi-Intensity LED chip that features a redesigned primary optic to maximize light output through secondary optics. The “HI” series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw.  

TriOptic Multi-Beam Lens System:
2.0 Light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. 

Data Dim LED Dimming Technology:
All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.   Plug in our DataDim Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. 

Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming.     

DrySeal Submersible Waterproof Light Housings:
In addition to molded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed.  

Impact PC Corrosion-Proof Bezels:
Our Impact PC bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode even after taking repeated impacts from rocks and debris. 

LiveActive Intelligent Thermal Management:
DENALI 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most. 

Chrome Plated Optic Holders:
We take the extra step to chrome plate our optic holders to maximize reflectivity and refine the appearance match the original chrome reflectors of your vehicle headlights. 

Low-Profile Mount with Stainless Steel Hardware:
DENALI 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. 

E Mark Approved Lenses
DENALI 2.0 kits include E Mark approved lenses

This is a complete Plug and Play Denali Dual Intensity LED Light Kit with the OEM Honda Fog Light Switch already built into the loom.

The kit contains the following

• 1 x OEM Honda Fog Light Switch
• 2 x Denali S4 LED Dual Intensity Light Pods
• 1 x Denali DataDim Dual Intensity Controller Module
• 1 x Plug and Play Wiring Loom

This means that there is no cutting or tapping into the existing wiring on your CRF1000 or CRF1000 Adventure Sport - you just plug this kit into existing connectors that are already in your bike's wiring loom.

The loom also has a connector allowing the fitment of the OEM Honda Auxilliary Power Socket as well or power a GPS.

• Engine Running / Fog Light Switch OFF / Denali Lights OFF
• Engine Running / Fog Light Switch ON / Denali Lights on at 50% DRL level
• Engine Running / Fog Light Switch ON / Main Beam ON (or flasher switch pressed) / Denali Lights on at 100%

Very neat install with no excess loom to try and find space for - specifically manufactured for the Honda CRF1000 Afria TWin and Adventure Sport.

Fits all models of CRF1000 Africa Twin, and CRF1000 Adventure Sport.

DENALI S4 2.0 TriOptic™ LED Light Pods

Producing an earsplitting 120 decibels of sound, the SoundBomb is 4 times louder than a standard motorcycle horn and twice as loud as a standard car horn!

The DENALI™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed.

The unique two piece design of the DENALI split horn separates the compressor from the acoustic unit allowing the horn to be installed in tight spaces like behind motorcycle body panels. A 48 inch heat resistant air hose connects between the two halves allowing you to mount them in an entirely different location on your bike without sacrificing any sound output.  

Specs:

• 120 Decibels at 3 feet
• Operating Voltage: 12V
• Power Draw: 20 amps
• Size (Compressor): 4.5" x 2.9" x 3.0"
• Size (Acoustic Unit): 4.1" x 3.7" x 3.4"
• Housing: Two Part Design
• CANbus Compatible

What's in the box:

• Horn compressor & horn acoustic unit 
• 12 volt, 30 amp relay
• Heat resistant air hose 
• Compressor Mounting Hardware
• Acoustic unit mounting hardware
• Zip tie mounting option

Plug and Play wiring loom for fog lights with OEM Honda Fog Light Switch, that when switched on your fog lights come on and the fog light symbol on the instrument panel is illuminated.

This loom is perfect if you want a true Plug and Play 'factory look' when adding aftermarket 10w LED running/fog lights.

No cutting of wires required, its plug and play directly into your existing 4 way option socket behind the front headlight.

Includes connectors for an additional power socket.

Fits all CRF1000 Africa Twin (2016-2019)

Fits all CRF1000 Africa Twin Adventure Sport (2018-2019)

THIS VERSION HAS BEEN DISCONTINUED BY  MICHELIN.  A NEW AND UPDATED VERSION WILL BE AVAILABLE IN 2022

Introducing our first tyre pressure monitoring system (TPMS) for motorcycles – bringing new levels of safety to riders for whom tyre condition is paramount.

MICHELIN TPMS – BIKE by Fit2Go detects a tyre in distress through loss of pressure, fast leakage or an increase in temperature – often the sign of an impending blowout. Its compact display flashes as brightly as a mobile phone torch if it detects an issue, plus identifies whether it is the front or rear tyre affected.

This patented solution can be fitted in less than two minutes, bringing the same direct TPMS technology already proven in the passenger car and van markets to two-wheels for the first time.

HOW DOES IT WORK?
This wireless system needs no programming and features a compact LCD screen which fits into a magnetic mount placed on a prominent part of the bike. The fully sealed and buttonless device can be quickly removed for security and is small enough to fit in a pocket.

The display offers a battery life of up to three months, with the USB-powered inductive charger making it simple to top-up.

Once fitted, the unit displays the pressure of both tyres, in either psi or bar, toggling between the front and rear at set intervals.

Riders will see a low-pressure warning if a tyre becomes under-inflated by 15%, an enhanced alert when the pressure either drops by 25%, or if over-inflated by 35% or more. There are also alerts for high tyre temperatures or fast leakage (at least 2 psi per minute).

WHY SHOULD YOU FIT IT?
Riding on incorrectly inflated rubber or suffering a tyre failure on two wheels is a potential nightmare scenario for any rider.

Our system continually monitors both tyres and provides precise pressure readings – unlike indirect TPMS solutions which typically offer estimates via the bike’s brake sensors.

Under-inflated tyres can seriously affect a motorcycle’s handling as they become deformed, reducing contact with the road and risking the tyre being pulled off the rim. The tyres are also more likely to overheat or be damaged by debris, whilst over-inflation can lead to uneven wear, reduced handling and poor ride comfort.

WHAT’S INCLUDED?

• Our unique ‘plug & play’ kit comes as standard with:
• Magnetic display mount
• USB-powered inductive charger
• Two sensors to replace the original valve caps
• Two locking wheel nuts with accompanying spanner (optional fit)
• Installation instructions

OFFICIAL LICENSEE
Fit2Go TPMS is an official global licensee of  Michelin, one of the world’s largest tyre manufacturers.

So confident is Michelin in the quality of the Fit2Go technology, that each product carries the iconic Michelin logo and features the world-famous Michelin Man himself.

All products have undergone rigorous testing at Michelin’s impressive research and development facility in France, where its tyres are created.