This is a multi-functional item of clothing in Touratech design, offering the highest degree of comfort and all-weather protection against wind, snow, sun, etc.
The multi-functional head cloth "Panoramic" is made seamlessly from one piece, is very hard-wearing and shape-retaining. The high-tech material guarantees long-life and dries out unusually fast.
The wonder of this cloth is hidden in its very versatility - in a jiffy, you can turn it into all kinds of head coverings, hair or neck scarves, headband, headscarf, keep-you-warms, etc - invent your own style!
This is the HEX ezCAN II accessory manager for the Honda CRF1100 Africa Twin.
YOUR BIKE. YOUR RULES. YOUR SAFETY.
The ezCAN plugs directly into your bike and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!
The power to manage your accessories safely.
The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.
Customise your bike and make it safer to ride.
KEY FEATURES.
One device manages everything
Integrated control
Integrates additional safety features
Does not void warranty
Plugs directly into CAN-Bus (saves installation time and wiring complexity)
Unobtrusive – fits perfectly under the seat
Easy configuration of software via USB (Mac and Windows PC)
The HEX ezCAN Extension Harness Kit provides you with everything that you need to connect your auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.
The kit contains:
2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
1 x 0.5m 3-core extension cable (typically used for brake lights)
1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
3 x female MT-3 connector kit including pins and wire seals
5 x male MT-3 connector kit including pins and wire seals
5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
The MT 3-Pin Y-Splitter Cable forms part of our ezCAN Spares product collection. These products are “add-on” spares available for use with our HEX ezCAN devices.
This product contains:
1 x Y-splitter
You will find this product useful if you need to connect more than one accessory to a single output channel of the ezCAN. A typical example would be two auxiliary lights.
The Micro USB Dust Covers form part of our ezCAN Spares product collection. These products are “add-on” spares available for use with our HEX ezCAN devices.
This product contains:
2 x Micro USB Dust Covers
You will find this product useful if you have lost the micro USB Dust Cover that came with your ezCAN.
The MT 3-Pin Blanking Plugs form part of our ezCAN Spares product collection. These products are “add-on” spares available for use with our HEX ezCAN devices.
This product contains:
2 x Blanking Plugs
You will find this product useful to cover up any of the unused ezCAN output channels.
The MT 3-Pin Male Connector Set forms part of our ezCAN Spares product collection. These products are “add-on” spares available for use with our HEX ezCAN devices.
This Male Connector Set contains:
3 x Male Connectors
9 x Terminals
9 x Wire seals
3 x Blanking seals
You will find this product useful if you are making extension cables for your ezCAN or if you want to attach connectors to any accessory that will plug into any of your ezCAN output channels.
This MT 3-Pin Male Connector Stub Set forms part of our ezCAN Spares product collection. These products are “add-on” spares available for use with our HEX ezCAN devices.
This product contains:
2 x Connector Stubs (2-wire pigtails)
2 x terminated wires (control signal for 3-wire loads)
2 x blanking seals
Attach these stubs to your accessories to connect your accessories to your ezCAN.
The ezCAN plugs directly into your CRF1100 Africa Twin and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!
The power to manage your accessories safely.
The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.
Customise your bike and make it safer to ride.
KEY FEATURES.
One device manages everything
Integrated control
Integrates additional safety features
Does not void warranty
Plugs directly into CAN-Bus (saves installation time and wiring complexity)
Unobtrusive – fits perfectly under the seat
Easy configuration of software via USB (Mac and Windows PC)
Route and plug the ezCAN into the motorcycle CAN-bus
Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)
This device works on the following Honda models:
CRF1100 Africa Twin
CRF1100 Adventure Sport
WHAT'S IN THE BOX
1 x ezCAN Device
1 x Micro USB Cable
2 x Velcro Strips
2 x Blanking Plugs
4 x Cable Ties
4 x Two-wire stub connectors (Orange)
4 x Terminal wires (Orange)
4 x Blanking seals
The HEX ezCAN Extension Harness Kit provides you with everything that you need to connect your auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.
The kit contains:
2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
1 x 0.5m 3-core extension cable (typically used for brake lights)
1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
3 x female MT-3 connector kit including pins and wire seals
5 x male MT-3 connector kit including pins and wire seals
5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
6 x 20mm adhesive lined Heat-shrink
2 x female spade connector terminals (6.3mm)
1m Sheathing
Denali D3 TriOptic™ Driving Lights
Our new D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing 36-watt street-legal driving light to hit the market. Our D3 driving light features our signature TriOptic™ beam system that includes a spot and hybrid driving lens with each light pod. Unlike previous TriOptic™ lights, the D3 hybrid driving beam is ECE and SAE compliant to deliver an impressive street-legal high beam in North America and European Union countries. But what if you're not concerned with street-legal precision and just want off-road outrageous? We got you covered too! The D3 spot lens was engineered for maximum beam distance measuring over 1900 feet at 1 lux (per pair). No other 36-watt light even comes close. The spot beam is so impressive it actually outperforms top-tier competitor's lights that are twice it's size.
Our D3 is also available in an SAE & ECE certified fog beam for drivers seeking a true street-legal fog beam that is super wide and features a crisp horizontal "cut-off".
Features
TriOptic™ Lens System (includes spot and hybrid lenses with each pod)
Best in class street-legal spot and hybrid beams (SAE/DOT & ECE certified)
High-Intensity Series Cree LEDs outputting 2100 lumens per pod
DataDim™ 3-wire smart-dimming technology
DrySeal™ Submersible Waterproof light can withstand the most extreme environments
Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels.
LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
Low profile mounting bracket with stainless steel hardware included