Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile.

The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit.

Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch.

Our DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up. 

 
DENALI 2.0 Features 

• HiDrive High-Intensity Cree LED's 
• TriOptic Multi-Beam Lens System 
• DataDim LED Dimming Technology 
• HotSwap Modular Wiring Harness System
• DrySeal Submersible Waterproof Illuminated Switch
• DrySeal Submersible Waterproof Light Housings 
• Impact PC Corrosion-Proof Bezels
• LiveActive Intelligent Thermal Management
• Chrome Plated Optic Holders
• Low-Profile Mount with Stainless Steel Hardware
• Handlebar Switch Mounts Included
• E Mark Lenses Included

 
Features Explained:

HiDrive High-Intensity 10 Watt LED's:
2.0 lights feature the latest development from Cree; a new Hi-Intensity LED chip that features a redesigned primary optic to maximize light output through secondary optics. The “HI” series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw.  

TriOptic Multi-Beam Lens System:
2.0 Light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. 

Data Dim LED Dimming Technology:
All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.   Plug in our DataDim Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. 

Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming.     

HotSwap Modular Wiring Harness System:
Our premium wiring harness features high-quality waterproof components and our clever HotSwap design that enables an effortless swap from the standard single-intensity relay to our dual-intensity DataDim controller (sold separately). 

DrySeal Submersible Waterproof Illuminated Switch:
Our beefy, completely sealed, waterproof switch was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. It's clever design can be either flush or bar mounted. 

DrySeal Submersible Waterproof Light Housings:
In addition to molded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed.  

Impact PC Corrosion-Proof Bezels:
Our Impact PC bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode even after taking repeated impacts from rocks and debris. 

LiveActive Intelligent Thermal Management:
DENALI 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most. 

Chrome Plated Optic Holders:
We take the extra step to chrome plate our optic holders to maximize reflectivity and refine the appearance match the original chrome reflectors of your vehicle headlights. 

Low-Profile Mount with Stainless Steel Hardware:
DENALI 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. 

Handlebar Switch Mount Included:
Our versatile switch design can be either flush, perch, or bar mounted to your vehicle. DENALI 2.0 light kits include a ?” and 1” handlebar mount to provide an integrated mounting location for the light switch right out of the box. 

E Mark Approved Lenses
DENALI 2.0 kits include E Mark approved lenses

 
D2 Kit Product Specs:

• LED's: (2x) 10 Watt Cree XPL HI
• Power Draw: 1.6 Amps
• Beam Distance (Spot): 525 Feet
• Beam Width (Spot): 75 Feet
• Raw Lumens: 2190
• Intensity: Single Intensity Harness
• DataDim Compatible: Yes 
• Operating Voltage: 12 VDC
• Pod Size:  2.2" Round x 2.4" Deep

D2 Kit Contents

• (2x) LED Light Pods
• (2x) Spot Lenses (Installed)
• (2x) E Mark Approved Elliptical Flood Lenses (Included)
• (1x) HotSwap Single Intensity Wiring Harness
• (1x) DrySeal Waterproof Illuminated Switch
• (1x) 7/8" inch Handlebar Switch Mount
• (1x) 1 inch Handlebar Switch Mount
• (2x) Hinge Mounts with M8 Stainless Steel Hardware
• (4x) Zip Ties & (1x) Adhesive Mounting Square

• (2) LED Light Pods
• (2) Spot lenses (pre-installed)
• (2) E-Mark approved True-Hybrid™ lenses 
• (1) HotSwap™ single intensity wiring harness with the capability of a plug-and-play hot swap to dual intensity without changing the harness itself
• (1) DrySeal™ waterproof illuminated switch
• (1) 7/8in handlebar switch mount
• (1) 1in handlebar switch mount
• (2) hinge mounts with M8 stainless steel hardware
• (4) Zip ties & (1) adhesive mounting square

• LEDs: 10 watt Cree XPL HI (per lamp)
• Power Draw: 1.6 amps total
• Beam Distance (spot): 1000ft
• Beam Width (spot): 75ft
• Raw Lumens: 2190
• Intensity: Single Intensity Harness
• DataDim™ Compatible: yes
• Operating Voltage: 12v
• Pod Size 3.7in diameter x 3.8in deep

• (2) LED Light Pods
• (2) Spot lenses (pre-installed)
• (2) E-Mark approved True-Hybrid™ lenses 
• (1) HotSwap™ single intensity wiring harness with the capability of a plug-and-play hot swap to dual intensity without changing the harness itself
• (1) DrySeal™ waterproof illuminated switch
• (1) 7/8in handlebar switch mount
• (1) 1in handlebar switch mount
• (2) hinge mounts with M8 stainless steel hardware
• (4) Zip ties & (1) adhesive mounting square

Denali SoundBOMB - LOUD! Stylish! Rugged!

Producing an earsplitting 120 decibels of sound, the SoundBomb is 4 times louder than a standard motorcycle horn and twice as loud as a standard car horn!

The DENALI™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed.

The unique design of the DENALI compact horn features a rugged molded clamp that mechanically mates the compressor to the acoustic unit. This makes the SoundBomb virtually indestructible even in high vibration applications. Compatible with all CANbus electrical systems.

Specific mount kit for installing the Denali SoundBomb compact horn on Honda Africa Twin CRF1000 and CRF1100 (all models).

Sturdy steel construction is laser cut and powder coated for a precise fit that is durable and corrosion resistant. This high-quality horn mount bolts directly to the engine crank case cover without the need for modifications.

Specs:

• Sound Output: 120 dB at 3 feet 
• Current Draw: 20 Amp 
• Dimensions: 5.4” (137mm) wide x 4.5” (116mm) high x 3.6” (86 mm) deep 
• Stylish All Black Design
• CANbus compatible

What's in the Box?

• Single Piece Electro-Pneumatic Horn 
• 12 volt, 30 amp relay
• Mounting Bracket

Fits

• 2016-2019 CRF1000
• 2018-2019 CRF1000 Adventure Sport
• 2020> CRF1100
• 2020> CRF1100 Adventure Sport

Producing an earsplitting 120 decibels of sound, the SoundBomb is 4 times louder than a standard motorcycle horn and twice as loud as a standard car horn!

The DENALI™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed.

The unique two piece design of the DENALI split horn separates the compressor from the acoustic unit allowing the horn to be installed in tight spaces like behind motorcycle body panels. A 48 inch heat resistant air hose connects between the two halves allowing you to mount them in an entirely different location on your bike without sacrificing any sound output.  

Specs:

• 120 Decibels at 3 feet
• Operating Voltage: 12V
• Power Draw: 20 amps
• Size (Compressor): 4.5" x 2.9" x 3.0"
• Size (Acoustic Unit): 4.1" x 3.7" x 3.4"
• Housing: Two Part Design
• CANbus Compatible

What's in the box:

• Horn compressor & horn acoustic unit 
• 12 volt, 30 amp relay
• Heat resistant air hose 
• Compressor Mounting Hardware
• Acoustic unit mounting hardware
• Zip tie mounting option

Producing a massive 113 decibels of sound, the SoundBomb is over twice as loud as your standard motorcycle horn!

The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed.

At 113 decibels, the distinct low-tone sound from the DENALI SoundBomb Mini is over twice as loud as a typical 100 decibel disc horn.

Designed to be a direct Plug & Play upgrade from your factory horn, requiring no additional relay or wiring harness.

When stock isn't quite enough, be heard with the SoundBomb Mini.

Compatible with all CANbus electrical systems.

Fully illustrated installation instructions

These are a direct replacement fit with your standard feeble horn on your Africa Twin.

Specifications:

• Sound Output: 113 dB at 3 feet
• Current Draw: 5 Amp
• Dimensions: 3.25"(82mm) x 3.4"(86mm) x 2.5"(63mm)
• Stylish All Black Design CANbus compatible

Connect the Denali DataDim™ Controller in place of the original relay to enable the lights to switch between half and full intensity with your vehicles original high beam switch.

This DENALI DataDim Dual-Intensity Controller enables the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch.

All DENALI 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.

 
What's In The Box?

• (x1) DataDim Dual-Intensity Controller
• (x1) Dual-Intensity Trigger Wire

This is a complete Plug and Play Denali Dual Intensity LED Light Kit with the OEM Honda Fog Light Switch already built into the loom.

The kit contains the following

• 1 x OEM Honda Fog Light Switch
• 2 x Denali D2 LED Dual Intensity Light Pods
• 1 x Denali DataDim Dual Intensity Controller Module
• 1 x Plug and Play Wiring Loom

This means that there is no cutting or tapping into the existing wiring on your CRF1000 or CRF1000 Adventure Sport - you just plug this kit into existing connectors that are already in your bike's wiring loom.

The loom also has a connector allowing the fitment of the OEM Honda Auxilliary Power Socket as well or power a GPS.

• Engine Running / Fog Light Switch OFF / Denali Lights OFF
• Engine Running / Fog Light Switch ON / Denali Lights on at 50% DRL level
• Engine Running / Fog Light Switch ON / Main Beam ON (or flasher switch pressed) / Denali Lights on at 100%

Very neat install with no excess loom to try and find space for - specifically manufactured for the Honda CRF1000 Afria TWin and Adventure Sport.

Fits all models of CRF1000 Africa Twin, and CRF1000 Adventure Sport.

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile.

The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit.

Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can switch between half and full intensity with your vehicle's original high beam switch.

Our DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up. 

 
DENALI 2.0 Features 

• HiDrive High-Intensity Cree LED's 
• TriOptic Multi-Beam Lens System 
• DataDim LED Dimming Technology 
• HotSwap Modular Wiring Harness System
• DrySeal Submersible Waterproof Light Housings 
• Impact PC Corrosion-Proof Bezels
• LiveActive Intelligent Thermal Management
• Chrome Plated Optic Holders
• Low-Profile Mount with Stainless Steel Hardware
• E Mark Lenses Included

Features Explained:

HiDrive High-Intensity 10 Watt LED's:
2.0 lights feature the latest development from Cree; a new Hi-Intensity LED chip that features a redesigned primary optic to maximize light output through secondary optics. The “HI” series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw.  

TriOptic Multi-Beam Lens System:
2.0 Light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. 

Data Dim LED Dimming Technology:
All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.   Plug in our DataDim Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. 

Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming.     

DrySeal Submersible Waterproof Light Housings:
In addition to molded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed.  

Impact PC Corrosion-Proof Bezels:
Our Impact PC bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode even after taking repeated impacts from rocks and debris. 

LiveActive Intelligent Thermal Management:
DENALI 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most. 

Chrome Plated Optic Holders:
We take the extra step to chrome plate our optic holders to maximize reflectivity and refine the appearance match the original chrome reflectors of your vehicle headlights. 

Low-Profile Mount with Stainless Steel Hardware:
DENALI 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. 

E Mark Approved Lenses
DENALI 2.0 kits include E Mark approved lenses

 
D2 Product Specs:

• LED's: (2x) 10 Watt Cree XPL HI
• Power Draw: 1.6 Amps
• Beam Distance (Spot): 525 Feet
• Beam Width (Spot): 75 Feet
• Raw Lumens: 2190
• Intensity: Single Intensity Harness
• DataDim Compatible: Yes 
• Operating Voltage: 12 VDC
• Pod Size:  2.2" Round x 2.4" Deep