• 3 connectors in one cable.
• Apple MFI Certified Lightning connector.
• USB C connector.
• Micro USB connector.
• About 3 feet long.
• Can be used for charging devices or data transfer.

• (2) LED Light Pods
• (2) Spot lenses (pre-installed)
• (2) E-Mark approved True-Hybrid™ lenses 
• (1) HotSwap™ single intensity wiring harness with the capability of a plug-and-play hot swap to dual intensity without changing the harness itself
• (1) DrySeal™ waterproof illuminated switch
• (1) 7/8in handlebar switch mount
• (1) 1in handlebar switch mount
• (2) hinge mounts with M8 stainless steel hardware
• (4) Zip ties & (1) adhesive mounting square

Oxford Heated Grips - Premium ADVENTURE.

The grips have ergonomically engineered surface structures to optimise riding performance.

Thicker rubber in areas of maximum wear, rhombus tread pattern for vibration absorption, 5² block siped tread patterns for high levels of grip and fee, diamond tread pattern where maximum grip is required and waffle matrix for finger grip.

• 5 heat settings (30%, 40%, 50%, 75% and 100%) with LED lights to indicate heat setting)
• Battery saving mode (turns grips off if you forget or if battery voltage falls too low)
• Switch technology (raised and tactile silicone buttons for use with gloved hands)
• Rainproof switch
• Draws under 4A
• Length: 132mm (can be trimmed to 122mm if required)
• Can be fitted in conjunction with Barkbusters Handguards

Includes:

• 2 x Hotgrips
• 1 x intelligent heat control
• 1 x metal bracket and fittings for mounting the heat controller
• 1 x wiring loom, cable ties and grip glue
• 1 x instruction booklet and warranty form 

• Volt meter - Display range : DC 7.0 ~ 19.9 V
• Display unit - 0.1 V
• Voltage warning - Unit flashes below 11.5 volts.
• Effective voltage - DC12V
• Meter standard - JIS D 0203 S2
• Meter size - ø 40 X 11mm
• Meter weight - 24g

Compact digital Temperature Gauge with a display range of 0°C ~ 120°C

The small and compact size of the Coin Volt meter, 40mm diameter and 11mm deep, makes it very easy to install at almost any location on the bike. 

The blue or red illuminated digits make this meter very attractive and easy to read in bright daylight and at night.

It’s equipped with a warning function to help you monitor the information - when the temperature is over 120°C, the meter will flash to warn you.

Completely black when not alight.

Simple connection, supplied with self adhesive pad.

• Display Range: 0°C ~ 120°C
• Display unit: 1°C
• Temperature Warning: When the temperature is over 120°C, the meter will flash to warn you.
• Effective voltage: DC12V
• Meter Standard: JIS D 0203 S2
• Meter size (W x L x H): ø 40 X 11mm
• Meter weight: 30g
• Temperature sensor type: M10 x 1/8 npt

• Display range: DC 8.0 ~ 18.0 V
• Display unit: 0.1 V
• Voltage warning: When the voltage is lower than 11.5V, the meter will flash to warn you.
• Effective voltage: DC12V
• Meter standard: JIS D 0203 S2
• Meter size: 56.4 X 27 X 11mm
• Meter weight: 20g

The X-Connect Eyelet Terminal allows a battery charger to connect quickly to any battery. Replace a lost connector or permanently mount one on your motorcycle, ATV, snowmobile, personal watercraft, lawn mower and more for easy charging.

• Permanently mount a battery connection to any battery.
• Lie-flat design for seamless installations with M6 (1/4-inch) hole size.
• Built-in fuse protection for increased safety.
• More ways to charge with plug-n-play accessory changes.
• Rugged, watertight connector for extreme environments.

X-Connect 12V Male Plug allows a battery charger to charge and maintain your vehicle's battery through 12V auxiliary plug/cigarette lighter. A built-in power LED indicator illuminates when the vehicle's 12-volt is active.

This has the DUAL SIZE auxilliary plug adapter allowing you to use on pretty much any vehicles auxilliary power socket - do not confuse this one with the cheaper single size version.

The GC003 12V Plug Connector works with NOCO Genius battery chargers and allows the battery chargers to charge and maintain your vehicle's battery by simply plugging into the 12V auxiliary plug/cigarette lighter. 
The Quick Connect cable makes connecting the 12V Plug Connector simple. Ideal for motorcycles where the battery compartment is difficult to access.

• For Use with G1100EU, G3500EU, GENIUS1, GENIUS2, GENIUS5, and GENIUS10 Noco Genius chargers
• Ergonomically Designed to Make Battery Connecting and Disconnecting Effortless
• Built-In Fuse Protection to Protect Against Potentially Dangerous Short Circuits
• Plug-N-Play Connector for Easy Accessory Changes
• Charge and maintain your battery from the 12V auxiliary plug/cigarette lighter
• LED indicator displays when the 12-volt auxiliary port is active.
• More ways to charge with plug-n-play accessory changes.
• Rugged, watertight connector for extreme environments.
• For Use with NOCO Genius Models Only

Producing a massive 113 decibels of sound, the SoundBomb is over twice as loud as your standard motorcycle horn!

The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed.

At 113 decibels, the distinct low-tone sound from the DENALI SoundBomb Mini is over twice as loud as a typical 100 decibel disc horn.

Designed to be a direct Plug & Play upgrade from your factory horn, requiring no additional relay or wiring harness.

When stock isn't quite enough, be heard with the SoundBomb Mini.

Compatible with all CANbus electrical systems.

Fully illustrated installation instructions

These are a direct replacement fit with your standard feeble horn on your Africa Twin.

Specifications:

• Sound Output: 113 dB at 3 feet
• Current Draw: 5 Amp
• Dimensions: 3.25"(82mm) x 3.4"(86mm) x 2.5"(63mm)
• Stylish All Black Design CANbus compatible