The S4 is the first light we developed as part of our new S-Series product line.

At over 3000 lumens the S4 provides more light per dollar than just about anything else on the market.

The new S-Series lights were specifically engineered to reduce cost without sacrificing performance, quality or durability.

In fact, the S4 features the same high intensity LEDs as the D-Series lights, but utilize a single-piece optic and sealed beam construction to reduce the number of unique components.

The result is a super durable high performing light that won't break the bank.

The fixed lens features two flood optics and two spot optics to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing.

Consistent with D-Series lights, the S4 features DENALI’s innovative DataDim™ Technology that enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller (DNL.WHS.11000) that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch.

S4 Pod Features

• High-Intensity Series Cree LEDs outputting 3066 lumens per pod.
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included

S4 Pod Specs

• LED’s: (4x) 7 Watt Cree XPL HI
• Power Draw: 2.3 Amps
• Beam Distance: 375 Feet
• Beam Width: 75 Feet
• Raw Lumens: 3066
• Intensity: Single Intensity Harness
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 2.75” Square x 1.97” Deep
• Pod Weight: 0.8 lbs
• IP67 Waterproof & Submersible

S4 Pod - What’s In The Box?

• (1x) LED Light Pods 
• (1x) Hinge Mounts with M8 Stainless Steel Hardware 
• (1x) Wiring Pigtail

The DENALI Control Switch enables complete control of the KTM CANsmart light circuits. Both Auxiliary Light Set One and Auxiliary Lights Set Two can be independently toggled ON/OFF and adjusted to the desired intensity via the switch.

The kit includes a 7/8" mounting band which is used to attached the control switch to your handlebar, right next to the factory controls.

In addition to molded silicone gasket seals, we use a unique DrySeal™ construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed. 

What’s In The Box?

• (x1) DrySeal™ Waterproof Switch 
• (x1) 7/8" Mounting Band
• (x2) Self Tapping Screws

Instruction Manual Download

PDF Instruction Manual (English)

This Flush Mount Auxiliary LED Brake Light Kit was designed to mount a single B6 Pod to any flat surface on your vehicle. The included silicone gasket ensures a watertight seal and the variety of hardware allow for through-bolting as well as blind self-tapping for installation in plastic.

Purpose built to create the most amount of light from the smallest, most low-profile, housing possible, the B6 is unbelievably bright but will practically disappear once installed.

Complete with a waterproof micro connector, plug-n-play splitter and included posi-taps, the B6 will plug-n-play directly to the DENALI CANsmart controller or connect into any vehicle brake and tail light circuit.

The B6 is the optimum auxiliary brake light to add to the CANsmart™ Controller for riders who want maximum rear visibility. Connecting to the CANsmart™ enables programmable flash pattern brake light and deceleration activated auto brake light functionality making the B6 the brightest and most feature-rich auxiliary brake light on the market.

Features

• Dual Circuit: Tail Light and Brake light
• 180 degree viewing angle Six high power LEDs
• Low 6 watt power consumption
• Low profile design Waterproof mounting gasket included
• Easy to connect to vehicle brake circuit

Specs

• Power Draw: 0.5 Amp
• Voltage: 12V DC
• Size: 4.4" x 1.1" x 0.42"
• Raw Lumens: 870
• IP67 Waterproof

Additional Features with DENALI CANsmart™ Controller

• Programmable deceleration activated brake light
• Programmable flash pattern brake light
• Plug & play waterproof connection to CANsmart™ Controller

What's In The Box?

• (x1) DENALI B6 Brake Light Visibility Pods (DNL.B6.003)
• (x1) Flush Mount for DRL & B6 Visibility Pods (LAH.DRL.10200)
• Note: The items of this kit are packaged separately and may ship in separate boxes.

Use the DENALI wiring adapter for connecting DENALI B6 LED Brake Lights to the OEM KTM harness for a true plug & play connection.

No wire tapping or other modifications to the original harness are necessary, just plug directly into the factory connector to send the brake light signal from your motorcycle to the B6

This handy little adapter is all you need when connecting a B6 Brake Light to your KTM Adventure!

Features

• Enables true plug & play connection 
• Plugs directly into OEM KTM brake light harness
• No need to modify factory wiring
• No other wiring needed for B6
• Simple & easy to install

What's In The Box?

• (x1) Wiring Adapter - B6 Brake Light to KTM OEM Harness

Vehicle Fitment

• KTM 1050 Adventure 2015-2017
• KTM 1090 Adventure R 2017-2019
• KTM 1190 Adventure 2013-2016
• KTM 1190 Adventure R 2013-2016
• KTM 1290 Super Adventure 2015-2017
• KTM 1290 Super Adventure R 2017-2019
• KTM 1290 Super Adventure S 2017-2019

This bike specific light mount allows you to mount any DENALI driving light in the optimum location on your Tenere 700.

This light mount fits the Yamaha Tenere 700 with the stock low fender but was also specifically designed to work with aftermarket high fender kits.

Keep in mind that some upper crashbars use the same mounting point, so if you are running upper crashbars that connect across the front of the bike use our crashbar mount (LAH.00.10300.B) instead to position the lights exactly where you want them.  

The kit includes powder coated steel brackets with an M8 mounting hole and all necessary mounting hardware. 

Installation Manual

Denali Electronics DrySeal HI-LOW-OFF Waterproof Switch

The DENALI HI-LOW-OFF Switch replaces the standard ON-OFF switch. The switch enables independent dimming of the lights, separate from the vehicle's OEM lighting system. This eradicates the issues presented by vehicles that do not provide and a clean 12v high beam trigger signal. This switch is also a great option for those who want full independent control of their auxiliary lights. 

In addition to molded silicone gasket seals, we use a unique DrySeal™ construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with the wires cut and connector removed. 

Note: Requires the DataDim Dual-intensity Controller

What’s In The Box?

• (x1) DrySeal™ HI-LOW-OFF Waterproof Switch 
• (x1) Adhesive Pad

This is a complete Plug and Play Denali Dual Intensity LED Light Kit with the OEM Honda Fog Light Switch already built into the loom.

The kit contains the following

• 1 x OEM Honda Fog Light Switch
• 2 x Denali D3 LED Dual Intensity Driving Light Pods
• 1 x Denali DataDim Dual Intensity Controller Module
• 1 x Plug and Play Wiring Loom

This means that there is no cutting or tapping into the existing wiring on your CRF1000 or CRF1000 Adventure Sport - you just plug this kit into existing connectors that are already in your bike's wiring loom.

The loom also has a connector allowing the fitment of the OEM Honda Auxilliary Power Socket as well or power a GPS.

• Engine Running / Fog Light Switch OFF / Denali Lights OFF
• Engine Running / Fog Light Switch ON / Denali Lights on at 50% DRL level
• Engine Running / Fog Light Switch ON / Main Beam ON (or flasher switch pressed) / Denali Lights on at 100%

Very neat install with no excess loom to try and find space for - specifically manufactured for the Honda CRF1000 Afria TWin and Adventure Sport.

Fits all models of CRF1000 Africa Twin, and CRF1000 Adventure Sport.

Denali D3 LED Driving Light Pods with DataDim™ Technology

The new D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing 36-watt street-legal driving light to hit the market.

Our D3 driving light features our signature TriOptic™ beam system that includes a spot and hybrid driving lens with each light pod.

Unlike previous TriOptic™ lights, the D3 hybrid driving beam is ECE and SAE compliant to deliver an impressive street-legal high beam in North America and European Union countries.

But what if you're not concerned with street-legal precision and just want off-road outrageous? We got you covered too! The D3 spot lens was engineered for maximum beam distance measuring over 1900 feet at 1 lux (per pair). No other 36-watt light even comes close. The spot beam is so impressive it actually outperforms top-tier competitors' lights that are twice its size. 

Features

• TriOptic™ Lens System (includes spot and hybrid lenses with each pod) 
• Best in class street-legal spot and hybrid beams (SAE/DOT & ECE certified) 
• High-Intensity Series Cree LEDs outputting 2100 lumens per pod 
• DataDim™ 3-wire smart-dimming technology (compatible with all DENALI dimming controllers) 
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments 
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels. 
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating 
• Low profile mounting bracket with stainless steel hardware included 
• Additional SAE/DOT & ECE certified hybrid driving lens included (spot lens installed) 
• Amber & Selective Yellow lenses available 

Beam Performance (pair) 
Spot Beam

• Beam Distance (at 1 lux): 1910 feet (582 meters) 
• Beam Width (at 1 lux): 100 feet (30 meters) 

Combo Beam (1 spot, 1 hybrid)

• Beam Distance (at 1 lux): 1520 feet (463 meters) 
• Beam Width (at 1 lux): 175 feet (53 meters)

Hybrid Beam

• Beam Distance (at 1 lux): 1050 feet (320 meters) 
• Beam Width (at 1 lux): 225 feet (69 meters) 
   

Specs (single pod)  

• Pod Size: 3.5" (90mm) Round x 2.62" (66mm) Deep
• LED: (3x) 11 Watt Cree XP-P LEDs 
• Power Draw: 36 Watts (3 Amps)
• Lumens: 2100
• DataDim™ Compatible: Yes 
• Operating Voltage: 9-32V DC 
• IP67 Waterproof & Submersible
• Hybrid Lens Certifications: SAE/DOT J581 & ECE R112
• Spot Lens Certifications: ECE R112 

Denali DialDim™ Lighting Controller for Yamaha Tenere 700

This pre-configured product bundle includes our standard DialDim Lighting Controller and a Tenere 700 plug-&-play wiring harness. The vehicle-specific harness simply plugs in-line at the T700s headlight, horn, and turn signal connectors to enable dozens of useful lighting features and settings! 

Product Bundle Contents
This bundle part number DNL.WHS.22400 includes:

• (1x) DNL.WHS.20500 - DialDim Lighting Controller  
• (1x) DNL.WHS.20300 - DialDim wiring harness for Yamaha Tenere 700 

A New Standard in LED Light Dimming & Control
Our ground-breaking DialDim™ Lighting Controller features a multicolor halo dimming switch that allows you to independently turn on/off and dim two sets of auxiliary lights from a single consolidated wiring harness. The LED halo switch displays your exact settings and allows for effortless dimming on the fly. The blue halo controls light set one and the green halo controls light set two; simply double click to switch between the two circuits.

The controller also features high beam, turn signal, and horn inputs to unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn.

More Features, More Feedback!
Our patent-pending multicolor halo dimmer switch can do a whole lot more than just turn your lights on and off and dim them. For starters, it displays the exact intensity of both of your lights so you're never stuck guessing if your lights are on, or what intensity they're set to.

Thanks to the electronically fused circuits, the halo switch can also display, and allow you to select, the fuse values for each circuit. And if a fuse trips, the LED halo will turn red providing real-time feedback and allow for resetting the fuse.

Last but not least, the switch halo doubles as a battery monitor with a low-voltage cutoff feature. Our industry-first design will flash different colors on startup to display your battery health and automatically shut off your auxiliary lights if the battery voltage drops below 10.8 volts.

Features

• ON/OFF & Dim - Independently control two sets of lights on/off and intensity level using the single DialDim™ Switch. The blue halo controls light set one and the green halo controls light set two. Double click to switch between the two circuits.
• High/Low Sync - Your auxiliary lights will automatically switch between your selected dim setting to full intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle's high beam circuit to enable this feature.
• Stealth Mode - A clever 0% dim setting on the switch allows your lights to be "off" during normal driving conditions but will jump to 100% intensity with your vehicle's high beam switch. The lights will also react to turn signal and horn inputs in this mode but will remain off when no inputs are detected.
• Cancel with Turn Signal - When enabled the main lights (blue circuit 1) will cancel in sync with your signal to prevent "washing out" your factory turn signal. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature.
• Flash as Turn Signal - When enabled your amber visibility lights (green circuit 2) will flash in sync with your factory turn signals. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature.
• Strobe with Horn - When enabled your auxiliary lights on both circuits will strobe at 4Hz when you sound your horn. Simply connect the green input wire to your vehicle horn circuit to enable this feature.
• Electronically Fused Circuits - Both light circuits are electronically fused and can be set right from the switch itself! The halo will illuminate red to notify you when a circuit fused is tripped.
• Voltage Display Indicator - Upon vehicle startup, the switch halo will flash green to indicate a healthy battery voltage, or flash red to indicate a battery voltage that is below 11.8v.
• Low Voltage Cutoff - If the battery voltage drops below 10.8v the lights will not power on preventing you from being stranded. The switch halo will flash 4 red LEDs to indicate the low voltage condition.

Features and operation of the DialDim™ Switch

One Switch, Two Circuits, Infinite Control

Our ground-breaking DialDim™ Lighting Controller features a multicolor halo dimming switch that allows you to independently turn on/off and dim two sets of auxiliary lights from a single consolidated wiring harness. The LED halo switch displays your exact settings and allows for effortless dimming on the fly. The blue halo controls light set one and the green halo controls light set two; simply double click to switch between the two circuits.

The controller also features high beam, turn signal, and horn inputs to unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn.

Product Specs 

• Two fully independent light circuits 
• Eight intensity levels per circuit (5%, 15%, 30%, 45%, 60%, 75%, 100%)
• Eight electronic fuse values (1A, 2A, 4A, 6A, 8A, 10A, 15A, 20A)
• Five feature input wires (ignition, high beam, horn, left turn, right turn) 
• 20A max per circuit (30A max combined) 
• Operating Voltage: 12 VDC

Note:  The length of the switch lead is 72", an 48" Switch Extension is available for purchase seperately.

Instruction Manual Download

• DialDim PDF Instruction Manual (English)
• Wiring Adapter Tenere PDF Instruction Manual (English)

This vehicle specific horn mount allows you to mount the DENALI SoundBomb Compact Dual-Tone Air Horn in the optimum location on your Africa Twin.

This kit includes a beefy powder coated steel bracket with an M8 mounting hole and all necessary mounting hardware. 

Fitment

• Honda CRF1000L Africa Twin 2016-2019
• Honda CRF1000L Africa Twin Adventure Sports 2018-2019
• Honda CRF1100L Africa Twin 2020-2022
• Honda CRF1100L Africa Twin Adventure Sports 2020-2022