HEX ezCAN II Gobi for KTM 890/1290 Bikes. 

YOUR BIKE. YOUR RULES. YOUR SAFETY.

The ezCAN plugs directly into your bike and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!

The power to manage your accessories safely.

The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.

Customise your bike and make it safer to ride.

KEY FEATURES.

• One device manages everything
• Integrated control
• Integrates additional safety features
• Does not void warranty
• Plugs directly into CAN-Bus (saves installation time and wiring complexity)
• Unobtrusive – fits perfectly under the seat
• Easy configuration of software via USB (Mac and Windows PC)
• Four individually electronically fused channels
• Waterproof and dust-proof

EASY INSTALLATION. (follow this Link for install guide)

• Download and install the configuration software 
• Install the ezCAN under the seat or side panel
• Route and connect the ezCAN battery cables
• Route and plug the ezCAN into the motorcycle CAN-bus
• Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)

The HEX ezCAN Gobi works on the following KTM models:

• KTM 890 (2020 onwards)
• KTM 1290 (2021 onwards)

NOTE: If you are planning on installing auxiliary lights and / or a Denali SoundBomb Horn, please add the EXTENSION HARNESS KIT. 

WHAT'S IN THE BOX

• 1 x ezCAN Device
• 1 x Micro USB Cable
• 2 x Velcro Strips
• 2 x Blanking Plugs
• 4 x Cable Ties
• 4 x Two-wire stub connectors (Orange)
• 4 x Terminal wires (Orange)
• 4 x Blanking seals
• 1 x Green Horn Harness
• 1 x Piggyback Terminal

HEX ezCAN II YARI for the Yamaha Tenere 700 (all models and versions). 

YOUR BIKE. YOUR RULES. YOUR SAFETY.

The ezCAN plugs directly into your Tenere and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!

The power to manage your accessories safely.

The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.

Customise your bike and make it safer to ride.

KEY FEATURES.

• One device manages everything
• Integrated control
• Integrates additional safety features
• Does not void warranty
• Plugs directly into CAN-Bus (saves installation time and wiring complexity)
• Unobtrusive – fits perfectly under the seat
• Easy configuration of software via USB (Mac and Windows PC)
• Four individually electronically fused channels
• Waterproof and dust-proof

EASY INSTALLATION. (follow this Link for install guide)

• Download and install the configuration software 
• Install the ezCAN under the seat or side panel
• Route and connect the ezCAN battery cables
• Route and plug the ezCAN into the motorcycle CAN-bus
• Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)

This HEX ezCAN will work on the following bike models:

• Ténéré 700 (2019-2022)
• Ténéré 700 Rally Edition (2020-2022)
• Ténéré 700 World Raid (2022+)
• Ténéré 700 (2023+)
• Ténéré 700 Rally Edition (2023+)
• Ténéré 700 Extreme Edition (2023+)
• Ténéré 700 Explore Edition (2023+)

This product is supplied with two diagnostic port adapter cables allowing support for both Euro4 & Euro5 models of bike.

NOTE: If you are planning on installing auxiliary lights and / or a Denali SoundBomb Horn, please add the EXTENSION HARNESS KIT. 

WHAT'S IN THE BOX

• 1 x ezCAN Device
• 1 x Micro USB Cable
• 2 x Velcro Strips
• 2 x Blanking Plugs
• 4 x Cable Ties
• 4 x Two-wire stub connectors (Orange)
• 4 x Terminal wires (Orange)
• 4 x Blanking seals
• 1 x Green Horn Harness
• 1 x Blue 4-way High beam Harness (for bikes with colour TFT display)
• 1 x Blue 6-way High beam Harness (for bikes with monochrome display)
• 1 x Euro5 diagnostic adapter (2022+ Euro5 models)
• 1 x Euro4 diagnostic adapter (2019-2022 Euro4 models)

The HEX ezCAN Extension Harness Kit provides you with everything that you need to connect your auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.

The kit contains:

• 2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
• 1 x 0.5m 3-core extension cable (typically used for brake lights)
• 1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
• 3 x female MT-3 connector kit including pins and wire seals
• 5 x male MT-3 connector kit including pins and wire seals
• 5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
• 6 x 20mm adhesive lined Heat-shrink
• 2 x female spade connector terminals (6.3mm)
• 1m Sheathing

MT 3-Pin Y-Splitter Cable

The MT 3-Pin Y-Splitter Cable forms part of our ezCAN Spares product collection. These products are “add-on” spares available for use with our HEX ezCAN devices.

This product contains:

• 1 x Y-splitter

You will find this product useful if you need to connect more than one accessory to a single output channel of the ezCAN. A typical example would be two auxiliary lights.

YOUR BIKE. YOUR RULES. YOUR SAFETY.

The ezCAN plugs directly into your CRF1100 Africa Twin and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!

The power to manage your accessories safely.

The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.

Customise your bike and make it safer to ride.

KEY FEATURES.

• One device manages everything
• Integrated control
• Integrates additional safety features
• Does not void warranty
• Plugs directly into CAN-Bus (saves installation time and wiring complexity)
• Unobtrusive – fits perfectly under the seat
• Easy configuration of software via USB (Mac and Windows PC)
• Four individually electronically fused channels
• Waterproof and dust-proof

EASY INSTALLATION. (follow this Link for install guide)

• Download and install the configuration software 
• Install the ezCAN under the seat or side panel
• Route and connect the ezCAN battery cables
• Route and plug the ezCAN into the motorcycle CAN-bus
• Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)

This device works on the following Honda models:

• CRF1100 Africa Twin
• CRF1100 Adventure Sport

WHAT'S IN THE BOX

• 1 x ezCAN Device
• 1 x Micro USB Cable
• 2 x Velcro Strips
• 2 x Blanking Plugs
• 4 x Cable Ties
• 4 x Two-wire stub connectors (Orange)
• 4 x Terminal wires (Orange)
• 4 x Blanking seals

The HEX ezCAN Extension Harness Kit provides you with everything that you need to connect your auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.

The kit contains:

• 2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
• 1 x 0.5m 3-core extension cable (typically used for brake lights)
• 1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
• 3 x female MT-3 connector kit including pins and wire seals
• 5 x male MT-3 connector kit including pins and wire seals
• 5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
• 6 x 20mm adhesive lined Heat-shrink
• 2 x female spade connector terminals (6.3mm)
• 1m Sheathing

Denali S4 Hybrid Driving Lights

The new S-Series lights were specifically engineered to reduce cost without sacrificing performance, quality or durability.

In fact, the S4 features the same high intensity LEDs as the D-Series lights, but utilize a single-piece optic and sealed beam construction to reduce the number of unique components.

The result is a super durable high performing light that won't break the bank.

The fixed lens features two flood optics and two spot optics to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing.

Consistent with D-Series lights, the S4 features DENALI’s innovative DataDim™ Technology that enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play HEZ ezCAN Controller that will automatically switch the lights intensity with your vehicle's original high beam switch.

Features

• High-Intensity Series Cree LEDs outputting 3066 lumens per pod.
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included

Beam Performance (pair) 

Specs (single pod)  

• LED’s: (4x) 7 Watt Cree XPL HI
• Power Draw: 2.3 Amps
• Beam Distance: 375 Feet
• Beam Width: 75 Feet
• Raw Lumens: 3066
• Intensity: Single Intensity Harness
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 2.75” Square x 1.97” Deep
• Pod Weight: 0.8 lbs
• IP67 Waterproof & Submersible

What’s in the Box?

• (2x) S4 LED Light Pods 
• (2x) Hinge Mounts with M8 Stainless Steel Hardware 
• (2x) Wiring Pigtail

YOUR BIKE. YOUR RULES. YOUR SAFETY.

The ezCAN plugs directly into your CRF1100 Africa Twin and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!

The power to manage your accessories safely.

The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.

Customise your bike and make it safer to ride.

KEY FEATURES.

• One device manages everything
• Integrated control
• Integrates additional safety features
• Does not void warranty
• Plugs directly into CAN-Bus (saves installation time and wiring complexity)
• Unobtrusive – fits perfectly under the seat
• Easy configuration of software via USB (Mac and Windows PC)
• Four individually electronically fused channels
• Waterproof and dust-proof

EASY INSTALLATION. (follow this Link for install guide)

• Download and install the configuration software 
• Install the ezCAN under the seat or side panel
• Route and connect the ezCAN battery cables
• Route and plug the ezCAN into the motorcycle CAN-bus
• Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)

This device works on the following Honda models:

• CRF1100 Africa Twin
• CRF1100 Adventure Sport

WHAT'S IN THE BOX

• 1 x ezCAN Device
• 1 x Micro USB Cable
• 2 x Velcro Strips
• 2 x Blanking Plugs
• 4 x Cable Ties
• 4 x Two-wire stub connectors (Orange)
• 4 x Terminal wires (Orange)
• 4 x Blanking seals

The HEX ezCAN Extension Harness Kit provides you with everything that you need to connect your auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.

The kit contains:

• 2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
• 1 x 0.5m 3-core extension cable (typically used for brake lights)
• 1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
• 3 x female MT-3 connector kit including pins and wire seals
• 5 x male MT-3 connector kit including pins and wire seals
• 5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
• 6 x 20mm adhesive lined Heat-shrink
• 2 x female spade connector terminals (6.3mm)
• 1m Sheathing

Denali D2 TriOptic™ Driving Lights

The D2 light was designed to create an impressive beam of light that is the perfect balance between night time distance and daytime conspicuity. 

Features

• High-Intensity Series Cree LEDs outputting 1095 lumens per pod
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included
• Additional E-Mark Approved flood lens included
• Amber lenses available (sold separately) DNL.D2.10100

Beam Performance (pair) 

Specs (single pod)  

• LED: (x1) 10 Watt Cree XPL HI
• Power Draw: 0.8 Amps
• Raw Lumens: 1095
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 2.2” Round x 2.4” Deep
• Pod Weight: 0.6 lbs
• IP67 Waterproof & Submersible
• E Mark Approved Flood Lens

What’s in the Box?

• (2x) LED Light Pod
• (2x) Spot Lenses (Installed) 
• (2x) E-Mark Approved Elliptical Flood Lenses (Included) 
• (2x) Hinge Mount with M8 Stainless Steel Hardware 
• (2x) Wiring Pigtail 

YOUR BIKE. YOUR RULES. YOUR SAFETY.

The ezCAN plugs directly into your CRF1100 Africa Twin and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!

The power to manage your accessories safely.

The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.

Customise your bike and make it safer to ride.

KEY FEATURES.

• One device manages everything
• Integrated control
• Integrates additional safety features
• Does not void warranty
• Plugs directly into CAN-Bus (saves installation time and wiring complexity)
• Unobtrusive – fits perfectly under the seat
• Easy configuration of software via USB (Mac and Windows PC)
• Four individually electronically fused channels
• Waterproof and dust-proof

EASY INSTALLATION. (follow this Link for install guide)

• Download and install the configuration software 
• Install the ezCAN under the seat or side panel
• Route and connect the ezCAN battery cables
• Route and plug the ezCAN into the motorcycle CAN-bus
• Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)

This device works on the following Honda models:

• CRF1100 Africa Twin
• CRF1100 Adventure Sport

WHAT'S IN THE BOX

• 1 x ezCAN Device
• 1 x Micro USB Cable
• 2 x Velcro Strips
• 2 x Blanking Plugs
• 4 x Cable Ties
• 4 x Two-wire stub connectors (Orange)
• 4 x Terminal wires (Orange)
• 4 x Blanking seals

The HEX ezCAN Extension Harness Kit provides you with everything that you need to connect your auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.

The kit contains:

• 2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
• 1 x 0.5m 3-core extension cable (typically used for brake lights)
• 1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
• 3 x female MT-3 connector kit including pins and wire seals
• 5 x male MT-3 connector kit including pins and wire seals
• 5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
• 6 x 20mm adhesive lined Heat-shrink
• 2 x female spade connector terminals (6.3mm)
• 1m Sheathing

Denali D3 TriOptic™ Driving Lights

Our new D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing 36-watt street-legal driving light to hit the market. Our D3 driving light features our signature TriOptic™ beam system that includes a spot and hybrid driving lens with each light pod. Unlike previous TriOptic™ lights, the D3 hybrid driving beam is ECE and SAE compliant to deliver an impressive street-legal high beam in North America and European Union countries. But what if you're not concerned with street-legal precision and just want off-road outrageous? We got you covered too! The D3 spot lens was engineered for maximum beam distance measuring over 1900 feet at 1 lux (per pair). No other 36-watt light even comes close. The spot beam is so impressive it actually outperforms top-tier competitor's lights that are twice it's size. 

Our D3 is also available in an SAE & ECE certified fog beam for drivers seeking a true street-legal fog beam that is super wide and features a crisp horizontal "cut-off".

Features

• TriOptic™ Lens System (includes spot and hybrid lenses with each pod) 
• Best in class street-legal spot and hybrid beams (SAE/DOT & ECE certified) 
• High-Intensity Series Cree LEDs outputting 2100 lumens per pod 
• DataDim™ 3-wire smart-dimming technology
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments 
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels. 
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating 
• Low profile mounting bracket with stainless steel hardware included 
• Additional SAE/DOT & ECE certified hybrid driving lens included (spot lens installed) 
• Amber & Selective Yellow lenses available (sold separately) 

Beam Performance (pair) 

Spot Beam

• Beam Distance (at 1 lux): 1910 feet (582 meters) 
• Beam Width (at 1 lux): 100 feet (30 meters) 

Combo Beam (1 spot, 1 hybrid)

• Beam Distance (at 1 lux): 1520 feet (463 meters) 
• Beam Width (at 1 lux): 175 feet (53 meters)

Hybrid Beam

• Beam Distance (at 1 lux): 1050 feet (320 meters) 
• Beam Width (at 1 lux): 225 feet (69 meters) 

Specs (single pod)  

• Pod Size: 3.5" (90mm) Round x 2.62" (66mm) Deep
• LED: (3x) 11 Watt Cree XP-P LEDs 
• Power Draw: 36 Watts (3 Amps)
• Lumens: 2100
• DataDim™ Compatible: Yes 
• Operating Voltage: 9-32V DC 
• IP67 Waterproof & Submersible
• Hybrid Lens Certifications: SAE/DOT J581 & ECE R112
• Spot Lens Certifications: ECE R112 

What’s in the Box?

• (2x) D3 LED Light Pod (spot lens installed)
• (2x) D3 Hybrid Lens 
• (2x) Hinge Mounts with M8 Stainless Steel Hardware 
• (2x) Wiring Pigtail

YOUR BIKE. YOUR RULES. YOUR SAFETY.

The ezCAN plugs directly into your CRF1100 Africa Twin and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!

The power to manage your accessories safely.

The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.

Customise your bike and make it safer to ride.

KEY FEATURES.

• One device manages everything
• Integrated control
• Integrates additional safety features
• Does not void warranty
• Plugs directly into CAN-Bus (saves installation time and wiring complexity)
• Unobtrusive – fits perfectly under the seat
• Easy configuration of software via USB (Mac and Windows PC)
• Four individually electronically fused channels
• Waterproof and dust-proof

EASY INSTALLATION. (follow this Link for install guide)

• Download and install the configuration software 
• Install the ezCAN under the seat or side panel
• Route and connect the ezCAN battery cables
• Route and plug the ezCAN into the motorcycle CAN-bus
• Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)

This device works on the following Honda models:

• CRF1100 Africa Twin
• CRF1100 Adventure Sport

WHAT'S IN THE BOX

• 1 x ezCAN Device
• 1 x Micro USB Cable
• 2 x Velcro Strips
• 2 x Blanking Plugs
• 4 x Cable Ties
• 4 x Two-wire stub connectors (Orange)
• 4 x Terminal wires (Orange)
• 4 x Blanking seals

The HEX ezCAN Extension Harness Kit provides you with everything that you need to connect your auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.

The kit contains:

• 2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
• 1 x 0.5m 3-core extension cable (typically used for brake lights)
• 1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
• 3 x female MT-3 connector kit including pins and wire seals
• 5 x male MT-3 connector kit including pins and wire seals
• 5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
• 6 x 20mm adhesive lined Heat-shrink
• 2 x female spade connector terminals (6.3mm)
• 1m Sheathing

Denali D4 TriOptic™ Driving Lights

Simply put; the DENALI D4 is a beast. It is DENALI’s most powerful light packing the punch of 4380 lumens in an aggressively styled housing.

The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing.

The included spot lens throws a massive beam of light and carries an official E-Mark certification. 

Features

• High-Intensity Series Cree LEDs outputting 4380 lumens per pod
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments 
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating 
• Low profile mounting bracket with stainless steel hardware included 
• Additional E-Mark Approved flood lens included 
• Amber lenses available (sold separately) DNL.D4.10100 

Beam Performance (pair) 

Specs (single pod)  

• LED’s: (4x) 10 Watt Cree XPL HI 
• Power Draw: 3.3 Amps 
• Raw Lumens: 4380 
• DataDim™ Compatible: Yes 
• Operating Voltage: 12 VDC 
• Pod Size: 3.9” Square x 2.6” Deep 
• Pod Weight: 1.55 lbs
• IP67 Waterproof & Submersible 
• E Mark Approved Spot Lens 

What’s in the Box?

• (2x) D4 LED Light Pods 
• (2x) True-Hybrid™ Lenses (Installed) 
• (2x) E-Mark Approved Spot Lenses (included) 
• (2x) Hinge Mounts with M8 Stainless Steel Hardware 
• (2x) Wiring Pigtail 

YOUR BIKE. YOUR RULES. YOUR SAFETY.

The ezCAN plugs directly into your CRF1100 Africa Twin and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!

The power to manage your accessories safely.

The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.

Customise your bike and make it safer to ride.

KEY FEATURES.

• One device manages everything
• Integrated control
• Integrates additional safety features
• Does not void warranty
• Plugs directly into CAN-Bus (saves installation time and wiring complexity)
• Unobtrusive – fits perfectly under the seat
• Easy configuration of software via USB (Mac and Windows PC)
• Four individually electronically fused channels
• Waterproof and dust-proof

EASY INSTALLATION. (follow this Link for install guide)

• Download and install the configuration software 
• Install the ezCAN under the seat or side panel
• Route and connect the ezCAN battery cables
• Route and plug the ezCAN into the motorcycle CAN-bus
• Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)

This device works on the following Honda models:

• CRF1100 Africa Twin
• CRF1100 Adventure Sport

WHAT'S IN THE BOX

• 1 x ezCAN Device
• 1 x Micro USB Cable
• 2 x Velcro Strips
• 2 x Blanking Plugs
• 4 x Cable Ties
• 4 x Two-wire stub connectors (Orange)
• 4 x Terminal wires (Orange)
• 4 x Blanking seals

The HEX ezCAN Extension Harness Kit provides you with everything that you need to connect your auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.

The kit contains:

• 2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
• 1 x 0.5m 3-core extension cable (typically used for brake lights)
• 1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
• 3 x female MT-3 connector kit including pins and wire seals
• 5 x male MT-3 connector kit including pins and wire seals
• 5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
• 6 x 20mm adhesive lined Heat-shrink
• 2 x female spade connector terminals (6.3mm)
• 1m Sheathing

Denali S4 Hybrid Driving Lights

The new S-Series lights were specifically engineered to reduce cost without sacrificing performance, quality or durability.

In fact, the S4 features the same high intensity LEDs as the D-Series lights, but utilize a single-piece optic and sealed beam construction to reduce the number of unique components.

The result is a super durable high performing light that won't break the bank.

The fixed lens features two flood optics and two spot optics to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing.

Consistent with D-Series lights, the S4 features DENALI’s innovative DataDim™ Technology that enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play HEZ ezCAN Controller that will automatically switch the lights intensity with your vehicle's original high beam switch.

Features

• High-Intensity Series Cree LEDs outputting 3066 lumens per pod.
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included

Beam Performance (pair) 

Specs (single pod)  

• LED’s: (4x) 7 Watt Cree XPL HI
• Power Draw: 2.3 Amps
• Beam Distance: 375 Feet
• Beam Width: 75 Feet
• Raw Lumens: 3066
• Intensity: Single Intensity Harness
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 2.75” Square x 1.97” Deep
• Pod Weight: 0.8 lbs
• IP67 Waterproof & Submersible

What’s in the Box?

• (2x) S4 LED Light Pods 
• (2x) Hinge Mounts with M8 Stainless Steel Hardware 
• (2x) Wiring Pigtail

YOUR BIKE. YOUR RULES. YOUR SAFETY.

The ezCAN plugs directly into your CRF1100 Africa Twin and listens to CAN-bus. It provides you with a highly configurable, seamless plug and play solution to add accessories to your bike without the need to cut any wires that could void your warranty!

The power to manage your accessories safely.

The HEX ezCAN accessory manager lets you add and configure accessories with ease and without cutting any wires. It’s simple and easy to fit additional lights, an air horn, accessories and emergency brake lights that make the bike safer to ride.

Customise your bike and make it safer to ride.

KEY FEATURES.

• One device manages everything
• Integrated control
• Integrates additional safety features
• Does not void warranty
• Plugs directly into CAN-Bus (saves installation time and wiring complexity)
• Unobtrusive – fits perfectly under the seat
• Easy configuration of software via USB (Mac and Windows PC)
• Four individually electronically fused channels
• Waterproof and dust-proof

EASY INSTALLATION. (follow this Link for install guide)

• Download and install the configuration software 
• Install the ezCAN under the seat or side panel
• Route and connect the ezCAN battery cables
• Route and plug the ezCAN into the motorcycle CAN-bus
• Plug accessories into the ezCAN and configure via USB (Mac or Windows PC)

This device works on the following Honda models:

• CRF1100 Africa Twin
• CRF1100 Adventure Sport

WHAT'S IN THE BOX

• 1 x ezCAN Device
• 1 x Micro USB Cable
• 2 x Velcro Strips
• 2 x Blanking Plugs
• 4 x Cable Ties
• 4 x Two-wire stub connectors (Orange)
• 4 x Terminal wires (Orange)
• 4 x Blanking seals

The HEX ezCAN Extension Harness Kit provides you with everything that you need to connect your auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.

The kit contains:

• 2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
• 1 x 0.5m 3-core extension cable (typically used for brake lights)
• 1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
• 3 x female MT-3 connector kit including pins and wire seals
• 5 x male MT-3 connector kit including pins and wire seals
• 5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
• 6 x 20mm adhesive lined Heat-shrink
• 2 x female spade connector terminals (6.3mm)
• 1m Sheathing

Denali D2 TriOptic™ Driving Lights

The D2 light was designed to create an impressive beam of light that is the perfect balance between night time distance and daytime conspicuity. 

Features

• High-Intensity Series Cree LEDs outputting 1095 lumens per pod
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments
• Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included
• Additional E-Mark Approved flood lens included
• Amber lenses available (sold separately) DNL.D2.10100

Beam Performance (pair) 

Specs (single pod)  

• LED: (x1) 10 Watt Cree XPL HI
• Power Draw: 0.8 Amps
• Raw Lumens: 1095
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 2.2” Round x 2.4” Deep
• Pod Weight: 0.6 lbs
• IP67 Waterproof & Submersible
• E Mark Approved Flood Lens

What’s in the Box?

• (2x) LED Light Pod
• (2x) Spot Lenses (Installed) 
• (2x) E-Mark Approved Elliptical Flood Lenses (Included) 
• (2x) Hinge Mount with M8 Stainless Steel Hardware 
• (2x) Wiring Pigtail