My oh my, the factory license plate holder on the T7 is ugly, brittle, huge... and did I mention ugly?! On our first dirt ride on the new T7, we hooked a branch and snapped one of the plastic brackets, yikes.

Our tail tidy replaces all the bulky fragile plastic parts with a powder-coated 304 stainless bracket for a much better look and increased strength. 
We've set the bracket up to use the factory T7 license plate light for simplicity. The indicator light mounting holes are 10mm so you have endless options for stock or aftermarket LED indicator lights.  

Do yourself a favour, order this T7 Tail Tidy today and the lose plastic conglomeration on the back of your Tenere!

Supplied with a number plate bracket.

This is the V2 version manufactured specifically to enable the stock Euro indicators to be remounted

*LED indicator lights are not included*

OEM Yamaha Indicator Lens Complete - Tenere 700

This is a complete indicator lens including reflector - fitment is for both Left and Right, Front and Rear indicators

When you change your bike's stock incandescent signal lights to LEDs, you have to install resistors or you get "hyper flash"... that annoying super fast signal flashing. Adding resistors can be annoying so thankfully there is another option!

You can swap your bike's flasher relay out and replace it with a flasher specifically made for use with LED signals. The install is quicker and easier than adding resistors to four signal lights and its cheaper too!

Thunderbox - Advanced power distribution module

Aftermarket auxiliary lights? Heated grips? GPS? Phone charger? An extra gauge or gadget? We have the solution for you! Connecting electric add-ons has never been this easy before.

ThunderBox makes fitting aftermarket accessories a doddle, just connect the 2 ring terminals to your battery, ThunderBox automatically detects when your engine is running/charging and switches power on to your accessories then switches off when the engine is stopped.

Connecting accessories to ThunderBox is even easier with piano key style locking connectors, just lift the orange tab, insert the wire from your accessory & press it back down, that's it!

Lightning fast connectivity
Connect auxiliary equipment fast, convenient and safe to the tool-free terminal blocks supplied. Just plug in the wires and you’re set!

Two versions
Available in two versions: 16A (TB-U01) and 2x16A (TB-U02) both with optional USB port (available to purchase seperately)

• TB-U01 - 16A 
• TB-U02 - 32A
• TB-USB1 - Additional USB Port

Advanced tech
Multiple working modes (automatic and ignition key controlled). Constant electronic protection (over current, short circuit). Fuseless design.

The ThunderBox simplifies and safeguards the process of connecting aftermarket electronic accessories (such as extra running lights, heated grips, GPS, phone charger, extra gauges and any other powered devices) to your vehicle. It acts as an automatic and easy-to-handle power distributor between the battery and the accessories. With the quick connect terminal blocks supplied, the installation process is quick and simple, requiring no tools nor specialist knowledge.

The ThunderBox not only extends battery life, but protects the bike’s electric system from overloading and short circuits. Get your power issues sorted – lightning fast!

Features

Quick and simple to use
Connect the TB directly to the battery terminals and decide whether you want a fully automatic or ignition key controlled operation. Connect the auxiliary equipment fast, conveniently and safely to the tool-free terminal blocks supplied. Just plug in the wires and you’re good to go!

Multiple working modes
The ThunderBox can operate in three different modes. Depending of the connection of the WHITE control wire the following modes can be acquired: Automatic mode: When the engine is started and runs evenly, the TB switches the power outputs ON.
When the engine is stopped, after a few seconds the TB switches the outputs OFF.
Ignition-controlled mode: The TB will switch the outputs ON/OFF (with a few seconds delay) following the ignition key switch position.
Stay-off mode: The TB will not turn the outputs ON even when a battery charger is connected. This is useful during winter storage as a trickle charger won’t activate the TB.

Awesome tech
The TB constantly monitors the battery voltage, engine state (running/off) and the outputs, then switches the loads on/off automatically. The TB isolates/disables the power supply to the accessories until the engine is started and running smoothly, ensuring 100% battery power is always available for starting. This is a fully automated process, resulting in trouble-free starts and enhanced battery life.

Small but tough
We use only the best components and technology to create products that can withstand the harshest environments. The TB has no moving parts, no relays and no fuses. Inside the rugged plastic case the circuitry is encased in epoxy resin, which makes it fully oil and water resistant, shock and vibration proof.

Wide compatibility
Compatible with ALL vehicles using a 12V battery system (all battery types and capacities are supported), including all motorcycles, cars, ATVs/UTVs, kit cars and even lawnmower trucks.

USB charger
A weatherproof USB charger is available separately (part no.: TB-USB1) so that power to your USB devices will be turned on/off automatically and protected too. You may connect multiple USB chargers to one TB unit.

User Manual

​ThunderBox User Manual

Your MBTZ10S replacement battery will arrive fully charged and ready to use in your Aprilia Tuareg 660 / Yamaha Tenere 700 (see note below).

There is no need to worry about adding acid or charging before going for a ride.  

Every MotoBatt power sport battery is of the sealed lead acid AGM type and will never leak acid which destroys your bikes finish.

• Voltage:  12
• CCA:  190
• Capacity (10HR):  8.6aH
• Weight:  2.9kg / 6.39lbs
• Dimensions:  Length: 151mm, Width: 87mm, Height: 95mm
• Case Color:  Yellow
• Replaces:  YTX7A-BS, YTZ10S

 
AGM Battery Technology

• AGM (Absorption Glass Mat) sealed battery technology was originally developed for military aircraft where power, weight, safety, and reliability were paramount considerations.
• AGM battery technology offers improvements over other sealed battery technologies.
• This "next generation" technology delivers increased safety, performance, and service life over all other existing sealed battery types, including gel technology.
• The AGM battery has an extremely low internal electrical resistance. This, combined with faster acid migration, allows the AGM batteries to deliver and absorb higher rates of amperage than other sealed batteries during discharging and charging.
• AGM technology batteries can be charged at normal lead-acid regulated charging voltages, therefore, it is not necessary to recalibrate charging systems or purchase special chargers.

 
THE BATTERY IS SUPPLIED CHARGED BUT IT IS RECOMMENDED THAT YOU FOLLOW THE INSTRUCTIONS BELOW TO GIVE YOUR NEW BATTERY THE BEST STARTING POWER AND PROLONGED LIFE

1. Remove the battery from box
2. Charge the battery for 3-4 hours with a Motorcycle battery charger
3. The battery is now charged & ready for use (when connecting to a motorbike/scooter, always connect the positive (+) terminal first)

MOTORCYCLE BATTERIES MUST BE CHARGED WITH A MOTORCYCLE CHARGER - (USING A CAR CHARGER CAN DAMAGE YOUR MOTORBIKE BATTERY)
 
PLEASE NOTE - We can only ship batteries to a UK Address

This bike specific light mount allows you to mount any DENALI driving light in the optimum location on your Tenere 700.

This light mount fits the Yamaha Tenere 700 with the stock low fender but was also specifically designed to work with aftermarket high fender kits.

Keep in mind that some upper crashbars use the same mounting point, so if you are running upper crashbars that connect across the front of the bike use our crashbar mount (LAH.00.10300.B) instead to position the lights exactly where you want them.  

The kit includes powder coated steel brackets with an M8 mounting hole and all necessary mounting hardware. 

Installation Manual

OEM Yamaha Wiring harness for LED indicators - Tenere 700 (2019>)

Wire harness to simplify installation of LED blinkers.

To fit the following models:

• 2019 onwards Tenere 700
• 2020 onwards Tenere 700 Rally Edition

Garmin Zumo XT Motorcycle Wiring Harness

Power and charge your Garmin zumo XT motorcycle sat nav on your motorbike with this official Garmin power cable.

Does your T7 have a check engine light lit up? 

No need to take it to the dealer! With this adaptor cable, you can check and clear engine codes at home using a standard automotive OBD-II scanner*. 

Don't have an OBD-II (On Board Diagnostics 2)? No problem, they can be purchased at countless online stores (ebay, Amazon etc) or at your local auto parts store, for as little as $20! Most auto parts stores will scan you vehicle for free... but they can't if you don't have this cable!

This cable is very small and light, carry it with you on a long bike trip just incase. It's great peace of mind!

Make sure to choose the correct cable from our drop-down menu!

• Euro 4 emissions-equipped bikes utilise the 4-pin cable (up to and including 2021 bikes)
• Euro 5 emissions-equipped bikes require a 6-pin cable.
• ALL 2022 T7s are Euro 5 regardless of where they are sold!!

*Scanner not included!