This auxiliary light mount for the Yamaha Tenere 700 provides a secure mounting solution for fitment of aftermarket lighting.
Robust aluminium bracketry is laser cut for a precise fit and finished with a durable black anodised coating.
This versatile light mount is compatible with most popular brands of aftermarket lights.
Existing bolt holes on the lower fork yoke (triple tree) are utilised without the need to drill, cut, weld or modify any components.
The low profile design positions the lights close to the fairing for maximum visibility while also minimising the risk of damage during a tip over or fall.
Note:
The images show this Light Mount fitted to our shop Tenere 700 and mounted Denali D2 lights which are 2.2" (56mm) diameter and 2.4" (61mm) deep, which gives plenty of clearance to the side fairing when the forks are on full lock either side.
Features:
Robust laser cut aluminium construction
Attractive & durable anodised finish
Bolt on installation does not require drilling, cutting or other modifications
Utilises existing lower fork yoke mounting locations for fitment
Compatible with most brands of auxiliary lights
M8 sized light mounting hole
Provides a very clean and factory looking installation
Low profile design positions the lights close to the fairing to minimise damage in a tip over or fall
The S4 is the first light we developed as part of our new S-Series product line.
At over 3000 lumens the S4 provides more light per dollar than just about anything else on the market.
The new S-Series lights were specifically engineered to reduce cost without sacrificing performance, quality or durability. In fact, the S4 features the same high intensity LEDs as the D-Series lights, but utilize a single-piece optic and sealed beam construction to reduce the number of unique components. The result is a super durable high performing light that won't break the bank.
The fixed lens features two flood optics and two spot optics to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing.
Consistent with D-Series lights, the S4 features DENALI’s innovative DataDim™ Technology that enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller (DENDNL.WHS.11000) that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch.
S4 Kit Features
High-Intensity Series Cree LEDs outputting 6132 lumens per kit.
DrySeal™ Submersible Waterproof light can withstand the most extreme environments
LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
Low profile mounting bracket with stainless steel hardware included
S4 Kit Specs
LED’s: (8x) 7 Watt Cree XPL HI
Power Draw: 4.6 Amps
Beam Distance: 540 Feet
Beam Width: 100 Feet
Raw Lumens: 6132
Intensity: Single Intensity Harness
DataDim™ Compatible: Yes
Operating Voltage: 12 VDC
Pod Size: 2.75” Square x 1.97” Deep (each)
Pod Weight: 0.8 lbs (each)
IP67 Waterproof & Submersible
S4 Kit - What’s In The Box?
(2x) LED Light Pods
(1x) Standard Single Intensity Wiring Harness
(2x) Hinge Mounts with M8 Stainless Steel Hardware
My oh my, the factory license plate holder on the T7 is ugly, brittle, huge... and did I mention ugly?! On our first dirt ride on the new T7, we hooked a branch and snapped one of the plastic brackets, yikes.
Our tail tidy replaces all the bulky fragile plastic parts with a powder-coated 304 stainless bracket for a much better look and increased strength.
We've set the bracket up to use the factory T7 license plate light for simplicity. The indicator light mounting holes are 10mm so you have endless options for stock or aftermarket LED indicator lights.
Do yourself a favour, order this T7 Tail Tidy today and the lose plastic conglomeration on the back of your Tenere!
Supplied with a number plate bracket.
This is the V2 version manufactured specifically to enable the stock Euro indicators to be remounted
When you change your bike's stock incandescent signal lights to LEDs, you have to install resistors or you get "hyper flash"... that annoying super fast signal flashing. Adding resistors can be annoying so thankfully there is another option!
You can swap your bike's flasher relay out and replace it with a flasher specifically made for use with LED signals. The install is quicker and easier than adding resistors to four signal lights and its cheaper too!
This bike specific light mount allows you to mount any DENALI driving light in the optimum location on your Tenere 700.
This light mount fits the Yamaha Tenere 700 with the stock low fender but was also specifically designed to work with aftermarket high fender kits.
Keep in mind that some upper crashbars use the same mounting point, so if you are running upper crashbars that connect across the front of the bike use our crashbar mount (LAH.00.10300.B) instead to position the lights exactly where you want them.
The kit includes powder coated steel brackets with an M8 mounting hole and all necessary mounting hardware.
Set of LED auxiliary headlights fog/fog for Yamaha Tenere 700
Enjoy all the benefits of modern LED technology on your motorbike!
Kill several birds with one stone with the Touratech LED auxiliary headlights:
Greater active safety:
better illumination of the field of vision with a much clearer light/dark boundary
lowest possible scatter of the light beam in height with fan-shaped illumination in the width
improved contrasts thanks to the white, daylight-like LED light
Greater passive safety:
low power consumption, i.e. the auxiliary headlights can even be used permanently with weak alternators or lots of users
no need for replacement lights thanks to the extremely long-lasting, maintenance-free LED elements
All this combined with a Touratech attachment that is specially tailored to the T7!
Touratech use innovative LED headlights of 70mm diameter for their auxiliary headlights.
The excellent light output is made possible by the latest lighting technology and high-performance LEDS with a higher level of efficiency. Power consumption just 13 watts per headlight! (Halogen: ~55 watts )
The LED technology offers additional benefits:
The headlights are very light. And thanks to the special aluminium housing and the lens made of reinforced laminate, they are also highly stable! They have a very low construction depth of just 55mm, which makes them much easier to attach without harming the design.
More light and innovative technology means more safety, while the bike looks better thanks to the "Adventure design" - and everything is in the customary Touratech quality. All you have to do is ride!
ECE and SAE-approved, so no need to change your records!
What's included:
2 LED "Fog" auxiliary headlights with control units
vehicle-specific attachment for headlights and control units
This connector will plug directly into one of the two accessory option plugs behind each front side panel, allowing you to connect a SatNav, Heated Grips, LED Lights, etc.
NOTE: The existing 3 way accessory option plugs on your Tenere have dummy plugs fitted - these will need to be un-clipped before you can connect a new accessory
Denali DialDim™ Lighting Controller for Yamaha Tenere 700
This pre-configured product bundle includes our standard DialDim Lighting Controller and a Tenere 700 plug-&-play wiring harness. The vehicle-specific harness simply plugs in-line at the T700s headlight, horn, and turn signal connectors to enable dozens of useful lighting features and settings!
Product Bundle Contents
This bundle part number DNL.WHS.22400 includes:
(1x) DNL.WHS.20500 - DialDim Lighting Controller
(1x) DNL.WHS.20300 - DialDim wiring harness for Yamaha Tenere 700
A New Standard in LED Light Dimming & Control
Our ground-breaking DialDim™ Lighting Controller features a multicolor halo dimming switch that allows you to independently turn on/off and dim two sets of auxiliary lights from a single consolidated wiring harness. The LED halo switch displays your exact settings and allows for effortless dimming on the fly. The blue halo controls light set one and the green halo controls light set two; simply double click to switch between the two circuits.
The controller also features high beam, turn signal, and horn inputs to unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn.
More Features, More Feedback!
Our patent-pending multicolor halo dimmer switch can do a whole lot more than just turn your lights on and off and dim them. For starters, it displays the exact intensity of both of your lights so you're never stuck guessing if your lights are on, or what intensity they're set to.
Thanks to the electronically fused circuits, the halo switch can also display, and allow you to select, the fuse values for each circuit. And if a fuse trips, the LED halo will turn red providing real-time feedback and allow for resetting the fuse.
Last but not least, the switch halo doubles as a battery monitor with a low-voltage cutoff feature. Our industry-first design will flash different colors on startup to display your battery health and automatically shut off your auxiliary lights if the battery voltage drops below 10.8 volts.
Features
ON/OFF & Dim - Independently control two sets of lights on/off and intensity level using the single DialDim™ Switch. The blue halo controls light set one and the green halo controls light set two. Double click to switch between the two circuits.
High/Low Sync - Your auxiliary lights will automatically switch between your selected dim setting to full intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle's high beam circuit to enable this feature.
Stealth Mode - A clever 0% dim setting on the switch allows your lights to be "off" during normal driving conditions but will jump to 100% intensity with your vehicle's high beam switch. The lights will also react to turn signal and horn inputs in this mode but will remain off when no inputs are detected.
Cancel with Turn Signal - When enabled the main lights (blue circuit 1) will cancel in sync with your signal to prevent "washing out" your factory turn signal. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature.
Flash as Turn Signal - When enabled your amber visibility lights (green circuit 2) will flash in sync with your factory turn signals. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature.
Strobe with Horn - When enabled your auxiliary lights on both circuits will strobe at 4Hz when you sound your horn. Simply connect the green input wire to your vehicle horn circuit to enable this feature.
Electronically Fused Circuits - Both light circuits are electronically fused and can be set right from the switch itself! The halo will illuminate red to notify you when a circuit fused is tripped.
Voltage Display Indicator - Upon vehicle startup, the switch halo will flash green to indicate a healthy battery voltage, or flash red to indicate a battery voltage that is below 11.8v.
Low Voltage Cutoff - If the battery voltage drops below 10.8v the lights will not power on preventing you from being stranded. The switch halo will flash 4 red LEDs to indicate the low voltage condition.
Features and operation of the DialDim™ Switch
One Switch, Two Circuits, Infinite Control
Our ground-breaking DialDim™ Lighting Controller features a multicolor halo dimming switch that allows you to independently turn on/off and dim two sets of auxiliary lights from a single consolidated wiring harness. The LED halo switch displays your exact settings and allows for effortless dimming on the fly. The blue halo controls light set one and the green halo controls light set two; simply double click to switch between the two circuits.
The controller also features high beam, turn signal, and horn inputs to unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn.